Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Price Match Guarantee
Worldwide Delivery
12 Month Warranty
Targa
By OE Match
Refine by Car Type
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Filter by brand
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Information
Plastic rivet and cap kit for targa roof seal.
Fits:
Porsche 911 targa - 1967 to 1989
Porsche 912 targa - 1967 to 1970
Porsche 964 targa - 1989 to 1994
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970318640
The product you are viewing cross references to these numbers
Fits:
Porsche 911 targa - 1967 to 1989
Porsche 912 targa - 1967 to 1970
Porsche 964 targa - 1989 to 1994
Kit includes
4 x Plastic rivet
4 x Cover cap
Diagram Ref: 19 and 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970318640
99970318640
99959138440
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
4 x Plastic rivet for targa seal. Porsche 911 74-89 / 964 TARGA (99970318640/1
4 x Cover Plug Plastic Rivet for targa seal. Porsche 911 67-94 Targa (99959138440
Price: €9.36
Arriving soon
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Information
Rear roll bar seal Targa with plastic rivets and cover plugs
This OE Match rear roll bar seal kit is a complete sealing and installation set designed for Porsche 911 Targa models from 1970 to 1973. The kit includes the rear roll bar rubber seal together with the correct plastic rivets and cover plugs required for proper installation on the Targa roll bar. The seal sits along the front edge of the Targa roll bar, creating the sealing surface between the removable roof panel and the body structure.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41, 39 and 40.
Kit Includes
1 × OE Match Rear Roll Bar Seal – 90156509144
4 × OE Match Porsche Plastic Rivets – 99970318640
4 × Genuine Porsche Cover Plug for Plastic Rivet – 99959138440
Classic Porsche 911 Targa models use a removable roof panel that locks into the windshield frame at the front and seals against the Targa roll bar at the rear. The rear roll bar seal provides the rubber interface between the roof panel and the roll bar structure.
This OE Match seal is manufactured to replicate the original Porsche seal profile and compression characteristics. It ensures correct fitment and proper sealing performance during installation.
The included plastic rivets and cover plugs secure the seal to the roll bar and provide a clean factory-style finish once installed.
Function
• Weather Sealing: Prevents water leaks around the Targa roof section
• Noise Reduction: Minimises wind noise at the roof-to-body junction
• Roof Fitment: Provides the sealing surface for the removable roof panel
• Cabin Protection: Helps keep the interior dry and protected from debris
Targa roof seals are exposed to UV light, weather and constant compression over many years. As the rubber ages it can harden, shrink or crack, allowing water leaks or wind noise to develop. Replacing the seal and hardware restores proper weather protection and ensures the roof panel fits securely against the roll bar.
Consider replacing the roll bar seal if you notice:
• Water leaks around the Targa roof
• Increased wind noise at highway speeds
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or body refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
The product you are viewing cross references to these numbers
This OE Match rear roll bar seal kit is a complete sealing and installation set designed for Porsche 911 Targa models from 1970 to 1973. The kit includes the rear roll bar rubber seal together with the correct plastic rivets and cover plugs required for proper installation on the Targa roll bar. The seal sits along the front edge of the Targa roll bar, creating the sealing surface between the removable roof panel and the body structure.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41, 39 and 40.
Kit Includes
1 × OE Match Rear Roll Bar Seal – 90156509144
4 × OE Match Porsche Plastic Rivets – 99970318640
4 × Genuine Porsche Cover Plug for Plastic Rivet – 99959138440
Classic Porsche 911 Targa models use a removable roof panel that locks into the windshield frame at the front and seals against the Targa roll bar at the rear. The rear roll bar seal provides the rubber interface between the roof panel and the roll bar structure.
This OE Match seal is manufactured to replicate the original Porsche seal profile and compression characteristics. It ensures correct fitment and proper sealing performance during installation.
The included plastic rivets and cover plugs secure the seal to the roll bar and provide a clean factory-style finish once installed.
Function
• Weather Sealing: Prevents water leaks around the Targa roof section
• Noise Reduction: Minimises wind noise at the roof-to-body junction
• Roof Fitment: Provides the sealing surface for the removable roof panel
• Cabin Protection: Helps keep the interior dry and protected from debris
Targa roof seals are exposed to UV light, weather and constant compression over many years. As the rubber ages it can harden, shrink or crack, allowing water leaks or wind noise to develop. Replacing the seal and hardware restores proper weather protection and ensures the roof panel fits securely against the roll bar.
Consider replacing the roll bar seal if you notice:
• Water leaks around the Targa roof
• Increased wind noise at highway speeds
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or body refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
90156509144
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Rear roll bar seal targa. Porsche 911 1970-73 (90156509145/8
4 x Plastic rivet for targa seal. Porsche 911 74-89 / 964 TARGA (99970318640/1
4 x Cover Plug Plastic Rivet for targa seal. Porsche 911 67-94 Targa (99959138440
Price: €195.39
Arriving soon
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Information
Aluminium frame for Targa top roof.
OE Match aluminium frame for Targa roof is an replacement structural component designed to closely replicate the original Porsche Targa roof frame used on classic 911 and 964 models. It provides the rigid framework that supports the removable Targa roof panel, ensuring correct alignment, fitment, and sealing when installed.
Fits:
Porsche 911 Targa 09/1986 - 11/1990
Porsche 964 Targa 12/1988 - 09/1993
Diagram ref no: 17, 18, 19, 21, 23, 24
The Targa roof frame provides a rigid backbone and precise support for the removable Targa roof panel, helping maintain correct body alignment, sealing performance, and driver comfort. It carries load between the windscreen header and the rear roof hoop, ensuring the Targa top locks securely into place and that gaps are minimised for weather resistance and acoustic performance.
Installed between the front windscreen frame and the rear Targa hoop, the aluminium frame stabilises the roof structure, supports the removable panel during installation, and maintains correct geometry during driving. Its design ensures that the roof panel seats consistently against seals and trim, preserving the original Porsche driving experience.
Roof frames on classic Targa models can become bent, corroded, or damaged over decades of use, exposure, and panel removal/replacement. A compromised frame can cause poor roof panel alignment, water ingress, wind noise, and difficulty sealing. Installing an aluminium roof frame restores correct support, alignment and improves weather sealing, structural feel, and roof operation.
When to replace:
• Original frame is bent, warped, or corroded
• Roof panel won’t seat correctly or seal properly
• Roof removal/installation becomes difficult or misaligned
• During Targa roof rebuilds or restoration projects
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156500201
The product you are viewing cross references to these numbers
OE Match aluminium frame for Targa roof is an replacement structural component designed to closely replicate the original Porsche Targa roof frame used on classic 911 and 964 models. It provides the rigid framework that supports the removable Targa roof panel, ensuring correct alignment, fitment, and sealing when installed.
Fits:
Porsche 911 Targa 09/1986 - 11/1990
Porsche 964 Targa 12/1988 - 09/1993
Diagram ref no: 17, 18, 19, 21, 23, 24
The Targa roof frame provides a rigid backbone and precise support for the removable Targa roof panel, helping maintain correct body alignment, sealing performance, and driver comfort. It carries load between the windscreen header and the rear roof hoop, ensuring the Targa top locks securely into place and that gaps are minimised for weather resistance and acoustic performance.
Installed between the front windscreen frame and the rear Targa hoop, the aluminium frame stabilises the roof structure, supports the removable panel during installation, and maintains correct geometry during driving. Its design ensures that the roof panel seats consistently against seals and trim, preserving the original Porsche driving experience.
Roof frames on classic Targa models can become bent, corroded, or damaged over decades of use, exposure, and panel removal/replacement. A compromised frame can cause poor roof panel alignment, water ingress, wind noise, and difficulty sealing. Installing an aluminium roof frame restores correct support, alignment and improves weather sealing, structural feel, and roof operation.
When to replace:
• Original frame is bent, warped, or corroded
• Roof panel won’t seat correctly or seal properly
• Roof removal/installation becomes difficult or misaligned
• During Targa roof rebuilds or restoration projects
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156500201
91156500201
90156520145
90156520245
90156520745
90156520840
90156521145
90156521245
The product you are viewing cross references to these numbers
Price: €1,499.57
Orderable
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Information
Eyelet screw for soft, zip targa roof.
Sold each - 3 required per car
Fits:
Porsche 911 / 912 - 1965 to 1971
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156532740
The product you are viewing cross references to these numbers
Sold each - 3 required per car
Fits:
Porsche 911 / 912 - 1965 to 1971
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156532740
90156532740
The product you are viewing cross references to these numbers
Price: €10.05
Orderable
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Information
Front roll bar seal Targa / Cabrio.
Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Click 'Zoom in' for large parts diagram.
Diagram ref no 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91179956580
The product you are viewing cross references to these numbers
Fits:
Porsche 911 1986-89
Porsche 964 1989-94
Click 'Zoom in' for large parts diagram.
Diagram ref no 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91179956580
91179956580
The product you are viewing cross references to these numbers
Price: €104.13
In stock
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Information
Rear roll bar seal for Porsche Targa models.
Targa top to windshield frame, with drain tubes.
Fits:
Porsche 911 1965-769
Click 'Zoom in' for large parts diagram.
Diagram Ref: 41
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509940
The product you are viewing cross references to these numbers
Targa top to windshield frame, with drain tubes.
Fits:
Porsche 911 1965-769
Click 'Zoom in' for large parts diagram.
Diagram Ref: 41
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509940
90156509940
The product you are viewing cross references to these numbers
Price: €175.50
In stock
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Information
Front screen roll bar seal for 911 Targa and Cabriolet models.
Fits:
Porsche 911 1967-85
Diagram Ref: 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509047
The product you are viewing cross references to these numbers
Fits:
Porsche 911 1967-85
Diagram Ref: 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509047
91156509047
The product you are viewing cross references to these numbers
Price: €162.63
In stock
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Information
Locating peg for Targa roof, transparent.
Fits:
Porsche 911 1967 - 1977 Targa
Click 'Zoom in' for large parts diagram.
Diagram ref no 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156521642
The product you are viewing cross references to these numbers
Fits:
Porsche 911 1967 - 1977 Targa
Click 'Zoom in' for large parts diagram.
Diagram ref no 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156521642
90156521642
The product you are viewing cross references to these numbers
Price: €16.97
Orderable
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Information
Plastic rivet for targa seal.
Fits:
Porsche 911 Targa 2.0-3.3 08/67-07/89
Porsche 912 Targa 1.6 08/67-02/70
Porsche 964 Targa 3.6 12/88-09/93
Diagram Ref: 19
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970318640
The product you are viewing cross references to these numbers
Fits:
Porsche 911 Targa 2.0-3.3 08/67-07/89
Porsche 912 Targa 1.6 08/67-02/70
Porsche 964 Targa 3.6 12/88-09/93
Diagram Ref: 19
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970318640
99970318640
The product you are viewing cross references to these numbers
Price: €1.17
Arriving soon
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Information
Plastic Targa align cover.
Fits:
Porsche 911 Targa- 1974 to 1989
Porsche 964 Targa - 1989 to 1994
Click 'Zoom in' for large parts diagram.
Diagram Ref: 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156521740
The product you are viewing cross references to these numbers
Fits:
Porsche 911 Targa- 1974 to 1989
Porsche 964 Targa - 1989 to 1994
Click 'Zoom in' for large parts diagram.
Diagram Ref: 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156521740
91156521740
The product you are viewing cross references to these numbers
Price: €10.48
In stock
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Information
Rear of roll bar seal.
The rear window to roll bar seal acts as a critical weather barrier, preventing water, wind, and road debris from entering the cabin around the rear glass area. It also helps reduce wind noise and ensures that the Targa top assembly fits cleanly and snugly, maintaining the iconic look and function of the Porsche Targa design.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Diagram ref no 23
• Application: Fits rear glass to roll bar sealing interface on classic Targa cars. One seal per car. Designed to match original factory dimensions and mounting locations for a direct replacement fit.
• Function: Weatherproofing between rear glass & roll bar
• Benefits: Prevents leaks, reduces noise, restores original fit & finish
Installed along the top edge of the rear glass where it meets the Targa roll bar, this gasket provides a consistent sealing surface that keeps out moisture and airflow while preserving the structural integrity and classic silhouette of your Porsche. It supports long-term durability for road driving and contributes to the car’s overall comfort and weather resistance.
Over time, the original rear window seal can harden, crack, or compress due to aging, UV radiation, and temperature fluctuations. When the seal isn't functioning properly, moisture can leak into or into the cabin, causing water spots, fogging, and potential corrosion. Replacing this seal with a new, high-quality seal restores proper weather protection, keeps the interior dry and quiet, and helps preserve the value and authenticity of your classic Porsche.
Replace the rear Targa roll bar seal if you notice:
• Cracks, splits, or visible hardening of the seal
• Water leaks or dampness around the rear window
• Increased wind noise at higher speeds
• Loose or compressed seal no longer providing firm contact
• During restoration or Targa top refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156593041
The product you are viewing cross references to these numbers
The rear window to roll bar seal acts as a critical weather barrier, preventing water, wind, and road debris from entering the cabin around the rear glass area. It also helps reduce wind noise and ensures that the Targa top assembly fits cleanly and snugly, maintaining the iconic look and function of the Porsche Targa design.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Diagram ref no 23
• Application: Fits rear glass to roll bar sealing interface on classic Targa cars. One seal per car. Designed to match original factory dimensions and mounting locations for a direct replacement fit.
• Function: Weatherproofing between rear glass & roll bar
• Benefits: Prevents leaks, reduces noise, restores original fit & finish
Installed along the top edge of the rear glass where it meets the Targa roll bar, this gasket provides a consistent sealing surface that keeps out moisture and airflow while preserving the structural integrity and classic silhouette of your Porsche. It supports long-term durability for road driving and contributes to the car’s overall comfort and weather resistance.
Over time, the original rear window seal can harden, crack, or compress due to aging, UV radiation, and temperature fluctuations. When the seal isn't functioning properly, moisture can leak into or into the cabin, causing water spots, fogging, and potential corrosion. Replacing this seal with a new, high-quality seal restores proper weather protection, keeps the interior dry and quiet, and helps preserve the value and authenticity of your classic Porsche.
Replace the rear Targa roll bar seal if you notice:
• Cracks, splits, or visible hardening of the seal
• Water leaks or dampness around the rear window
• Increased wind noise at higher speeds
• Loose or compressed seal no longer providing firm contact
• During restoration or Targa top refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156593041
90156593041
The product you are viewing cross references to these numbers
Price: €22.17
In stock
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Information
Rear roll bar seal, for Targa models.
Fits:
Porsche 911 1986-89 Targa
Porsche 964 1989-94 Targa
Click 'Zoom in' for large parts diagram.
Diagram Ref: 21
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
911565091478VB
The product you are viewing cross references to these numbers
Fits:
Porsche 911 1986-89 Targa
Porsche 964 1989-94 Targa
Click 'Zoom in' for large parts diagram.
Diagram Ref: 21
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
911565091478VB
91156509147
911565091478VB
The product you are viewing cross references to these numbers
Price: €327.60
In stock
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Information
Rear roll bar seal for Porsche Targa models
This seal installs along the front edge of the Targa roll bar, creating the sealing surface between the removable roof panel and the body of the car. Manufactured as an OE Match replacement, the seal replicates the original Porsche profile and fitment to ensure proper roof sealing and factory-correct installation.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41
The rear roll bar seal sits on the top front edge of the Targa roll bar and forms the contact surface where the roof panel rests.
The OE Match version reproduces the original Porsche rubber gasket in both shape and material quality, providing the correct compression needed to achieve a watertight seal when the roof panel is installed.
The seal prevents water, wind and dust from entering the cabin through the roof-to-body junction. It also stabilises the roof panel and reduces wind noise by maintaining proper contact between the removable roof section and the roll bar.
Replacing worn seals restores the proper weatherproofing and comfort expected from the Targa roof system.
Over time the original rubber seals can harden, shrink or crack due to age, UV exposure and temperature changes. When the seal deteriorates, water leaks and wind noise may develop around the Targa roof area. Installing a new OE Match seal restores proper sealing performance and helps maintain a dry and comfortable interior.
Replace the rear roll bar seal if you notice:
• Water leaks from the Targa roof area
• Increased wind noise when driving
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
The product you are viewing cross references to these numbers
This seal installs along the front edge of the Targa roll bar, creating the sealing surface between the removable roof panel and the body of the car. Manufactured as an OE Match replacement, the seal replicates the original Porsche profile and fitment to ensure proper roof sealing and factory-correct installation.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41
The rear roll bar seal sits on the top front edge of the Targa roll bar and forms the contact surface where the roof panel rests.
The OE Match version reproduces the original Porsche rubber gasket in both shape and material quality, providing the correct compression needed to achieve a watertight seal when the roof panel is installed.
The seal prevents water, wind and dust from entering the cabin through the roof-to-body junction. It also stabilises the roof panel and reduces wind noise by maintaining proper contact between the removable roof section and the roll bar.
Replacing worn seals restores the proper weatherproofing and comfort expected from the Targa roof system.
Over time the original rubber seals can harden, shrink or crack due to age, UV exposure and temperature changes. When the seal deteriorates, water leaks and wind noise may develop around the Targa roof area. Installing a new OE Match seal restores proper sealing performance and helps maintain a dry and comfortable interior.
Replace the rear roll bar seal if you notice:
• Water leaks from the Targa roof area
• Increased wind noise when driving
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
90156509144
The product you are viewing cross references to these numbers
Price: €146.25
In stock
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Information
Rear roll bar seal for Porsche Targa models
The OE Match rear roll bar seal is a weather-sealing component designed for Porsche 911 Targa models from 1970 to 1973. This rubber seal is installed along the front edge of the Targa roll bar, forming the sealing interface between the removable roof panel and the body structure.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41
The Targa roof system used on classic Porsche 911 models features a removable roof panel and a fixed roll bar behind the seats. The rear roll bar seal sits on the top/front face of the Targa roll bar, creating a tight sealing surface where the removable roof panel meets the body.
The OE Match version reproduces the original rubber gasket used by Porsche, ensuring the correct shape and compression required for proper roof sealing on early 911 Targa models.
This seal prevents water, wind and dust from entering the cabin at the junction between the removable roof section and the roll bar. It also reduces wind noise and helps maintain a tight, stable fit of the Targa roof panel during driving.
Replacing worn seals restores proper weatherproofing and improves cabin comfort.
Function
• Weather Sealing: Prevents water leaks around the Targa roof section
• Noise Reduction: Minimises wind noise at the roof-to-body junction
• Roof Fitment: Provides the sealing surface for the removable roof panel
• Cabin Protection: Helps keep the interior dry and protected from debris
Roof seals are exposed to sunlight, temperature changes and compression over decades of use. Over time the rubber can harden, shrink or crack, reducing its ability to seal properly and allowing water leaks or wind noise into the cabin. Replacing the seal restores proper roof sealing and helps preserve the interior of the vehicle.
Consider replacing the roll bar seal if you notice:
• Water leaks around the Targa roof
• Increased wind noise at highway speeds
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or body refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
The product you are viewing cross references to these numbers
The OE Match rear roll bar seal is a weather-sealing component designed for Porsche 911 Targa models from 1970 to 1973. This rubber seal is installed along the front edge of the Targa roll bar, forming the sealing interface between the removable roof panel and the body structure.
Fits:
Porsche 911 1970 - 1973
Diagram ref no 41
The Targa roof system used on classic Porsche 911 models features a removable roof panel and a fixed roll bar behind the seats. The rear roll bar seal sits on the top/front face of the Targa roll bar, creating a tight sealing surface where the removable roof panel meets the body.
The OE Match version reproduces the original rubber gasket used by Porsche, ensuring the correct shape and compression required for proper roof sealing on early 911 Targa models.
This seal prevents water, wind and dust from entering the cabin at the junction between the removable roof section and the roll bar. It also reduces wind noise and helps maintain a tight, stable fit of the Targa roof panel during driving.
Replacing worn seals restores proper weatherproofing and improves cabin comfort.
Function
• Weather Sealing: Prevents water leaks around the Targa roof section
• Noise Reduction: Minimises wind noise at the roof-to-body junction
• Roof Fitment: Provides the sealing surface for the removable roof panel
• Cabin Protection: Helps keep the interior dry and protected from debris
Roof seals are exposed to sunlight, temperature changes and compression over decades of use. Over time the rubber can harden, shrink or crack, reducing its ability to seal properly and allowing water leaks or wind noise into the cabin. Replacing the seal restores proper roof sealing and helps preserve the interior of the vehicle.
Consider replacing the roll bar seal if you notice:
• Water leaks around the Targa roof
• Increased wind noise at highway speeds
• Hardened, cracked or shrunken rubber seal
• During Targa roof restoration or body refurbishment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90156509145
90156509144
The product you are viewing cross references to these numbers
Price: €186.03
Arriving soon
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Information
Rear roll bar seal targa.
Fits:
Porsche 911 1974-85
Diagram Ref no.46
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509145
The product you are viewing cross references to these numbers
Fits:
Porsche 911 1974-85
Diagram Ref no.46
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509145
91156509145
The product you are viewing cross references to these numbers
Price: €174.33
In stock
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Reinforcement plate set Targa roof - 2 pieces
These plates are fitted to the Targa frame area to bolster structural rigidity, reduce frame flex, and help maintain proper alignment of the removable Targa roof section. Made from aluminium with OE-style dimensions and finish, the set offers reliable support for the roof structure and helps protect the body from stress cracks or deformation caused by chassis flex or road loads.
Sold as a set of two plates - one each side of the Targa hoop area.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90159800240
The product you are viewing cross references to these numbers
These plates are fitted to the Targa frame area to bolster structural rigidity, reduce frame flex, and help maintain proper alignment of the removable Targa roof section. Made from aluminium with OE-style dimensions and finish, the set offers reliable support for the roof structure and helps protect the body from stress cracks or deformation caused by chassis flex or road loads.
Sold as a set of two plates - one each side of the Targa hoop area.
Fits:
Porsche 911 - 1967 to 1985
Porsche 912 - 1967 to 1969
• Material: Aluminium, offering strength while reducing added weight.
• Fitment: Left and right sides of the Targa roof frame
Over time, the Targa frame section can suffer fatigue, stress cracking, or deformation due to removable roof panels, body flex, or prolonged road use. These issues can lead to misalignment of the roof, subtle leaks, wind noise or diminished structural integrity. Installing a new reinforcement plate set restores correct support, helps maintain chassis integrity and protects the Targa roof fit and body alignment for years to come.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90159800240
90156500240
90156500241
90156500246
91156500240
91156500246
96456500200
96456500201
PCG56500201
The product you are viewing cross references to these numbers
Price: €449.34
Orderable
Also found on these pages
-
soft top 911 TARGA 1978-83 811-05
-
window glazing 911 TARGA / CABRIO 1987-89 805-05
-
windscreen frame accessories 911 TARGA / CABRIO 1987-89 811-06
-
Window glazing windscreen 911 1970-73 TARGA 805-05
-
Soft top 911 TARGA 1984-86 811-05
-
window glazing 911 TARGA/CABRIO 1984-86 805-10
-
Roof 911 1970-73 TARGA 811-05
-
interior equipment roof roll bar 911 1987-89 COUPE / TARGA 807-06
-
interior equipment roof roll bar 911 1984-86 COUPE / TARGA 807-06
-
window glazing windscreen 911 1974-77 TARGA 805-10
-
Soft top 911 1974-77 TARGA 811-05
-
window glazing 911 TARGA 1965-69 805-10
-
roof 911 TARGA 1965-69 811-05
About Targa
OEMatch Targa — Fit, Function, Confidence
Restore the open-air driving appeal of a Porsche Targa with purpose-made roof panels, seals and trim from OEMatch. This collection focuses on components that affect weatherproofing, wind noise and panel alignment so that classic and modern Targa models retain correct operation and the original design profile.
Available Types
- Removable roof panels
- Seals and gaskets
- Latches, hinges and fasteners
- Headliners and interior trim
Understanding OEMatch Targa
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original targa. OE (Original Equipment) refers to parts matching original specifications for the targa and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM targa engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models. OEMatch provides a wide selection of Targa roof panels, seals, latches and trim and catalogues thousands of cross-references to support repair and maintenance.
Benefits Include
- Improved cabin weatherproofing and reduced water ingress
- Lower wind noise and better acoustic comfort
- Restored panel alignment and smoother removable-panel operation
Why Targa Wear and Fail
- Hardened or cracked seals leading to leaks and draughts
- Panel misalignment caused by worn or damaged latches and hinges
- Weathering of vinyl, fabric or frame components over time
The Importance of Replacing with OEMatch Targa
Timely replacement of seals, latches and trim helps prevent interior damage and preserves the Targa’s characteristic appearance on Porsche models. Correct parts reduce the need for repeat repairs, limit water-related corrosion or mould, and support reliable panel operation during regular use and storage.
Advantages
- Direct-fit replacements engineered to match original dimensions and tolerances
- Components chosen to restore function, sealing and acoustic performance
- Options covering both cosmetic trim and functional fittings to maintain original operation
You may also like
Popular Models
