do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Classic Seats
By OE Match
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Nürburgring R Bucket Seats by OE Match are supplied as a pair for selected Porsche 356, 911 and 912 models from 1950–94. Finished in black automotive leather, the set includes one left-hand and one right-hand seat with classic styling, folding backrests and rotary backrest adjustment.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
These bucket seats combine a period-inspired appearance with shaped support for the driver and passenger. The folding backrest helps retain practical access behind the front seats, while the rotary adjuster allows the backrest angle to be set for a suitable driving position.
Functions
- Provides shaped seating support for the driver and passenger
- Maintains a classic sports-seat appearance
- Allows each backrest to fold forwards
- Provides rotary adjustment of the backrest angle
- Supplies matching left-hand and right-hand seats
Technical Details
- Set contents: two seats
- Upholstery: black automotive leather, including the rear and side panels
- Construction: corrosion-protected steel tube seat frames
- Padding: heavy-duty, flame-resistant foam
- Backrest: folding design with rotary adjustment
- Vehicle-specific seat rails and mounting adaptors are required separately
Symptoms of Fault
- Split, cracked or heavily worn seat upholstery
- Collapsed padding or reduced seating support
- Loose frames, rocking seats or worn runners
- Stiff, damaged or unreliable backrest adjustment
- Squeaks or movement around the seat mountings
- Original seats no longer matching the intended interior finish
Why Replacement Matters
Replacing deteriorated seats can restore cabin presentation, seating support and adjustment. This pair is suited to classic interior restoration or modification where a traditional bucket-seat profile and adjustable folding backrest are preferred. Correct rails, adaptors and mounting hardware must be selected for the vehicle.
FAQs
- Does the set include two seats?
Yes. One left-hand and one right-hand seat are included. - Are the backrests adjustable?
Yes. Each folding backrest uses a rotary adjuster to set its angle. - Are seat rails and adaptors included?
No. Compatible rails and vehicle-specific adaptors must be selected separately. - Can these seats replace damaged classic Porsche seats?
They can provide a classic-style alternative where the listed vehicle application and required mounting components have been confirmed.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Nürburgring R Bucket Seats, Leatherette / Basket Weave, SET OF 2
Nürburgring R bucket seats by OE Match for Porsche 356, 911 and 912 models from 1950–94. Supplied as a matching pair for the left and right sides, the seats feature black leatherette upholstery with basket-weave centre panels and classic sports-seat styling.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
These bucket seats combine a period-style profile with the convenience of folding, adjustable backrests. Each backrest is operated through a rotary adjuster, allowing the seating angle to be altered while retaining the clean lines associated with classic sports-car interiors.
Functions
- Provides a matching pair of front bucket seats
- Supports both driver and passenger with a shaped sports-seat design
- Allows the backrest angle to be adjusted using a rotary control
- Includes a folding backrest for improved access
- Complements classic Porsche interior and restoration projects
Technical Details
- Quantity: set of two seats
- Configuration: one left-side and one right-side seat
- Upholstery: black leatherette
- Centre panel: basket-weave pattern
- Backrest: folding and angle-adjustable
- Adjustment method: side-mounted rotary control
Symptoms of Fault
- Split, torn or heavily worn upholstery
- Collapsed padding that no longer provides consistent support
- Loose seat frames or movement at the runners
- Damaged or difficult-to-operate backrest adjustment
- Squeaking, rocking or excessive movement while seated
- Deteriorated original seats affecting the cabin's appearance
Why Replacement Matters
Replacing worn seats can restore seating support, backrest adjustment and the presentation of a classic Porsche interior. The period-influenced shape and basket-weave detailing make this pair suitable for restoration projects or interior refreshes where a traditional sports-seat appearance is preferred. Inspect the existing runners, brackets and mounting points before installation, as worn supporting components can cause unwanted movement even when new seats are fitted.
FAQs
- Does the set include both front seats?
Yes. The set contains one left-side seat and one right-side seat. - Can the backrests be adjusted?
Yes. Each seat has a folding backrest with angle adjustment operated by a rotary control. - Are seat rails and vehicle adapters included?
No. Suitable seat rails and model-specific adapters must be selected separately. - Is this suitable for a restoration?
The classic profile and basket-weave upholstery make the seats suitable for period-style restoration and interior refresh projects, subject to the required mounting components.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Nürburgring R Bucket Seats, Leatherette / Houndstooth, SET OF 2
Nürburgring R Bucket Seats by OE Match are supplied as a matched pair for classic Porsche 356, 911 and 912 models from 1950–94. The leatherette and houndstooth upholstery complements a period-style interior, while the folding and adjustable backrests add practical comfort.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
These classic bucket seats provide supportive driver and passenger seating while retaining the visual character associated with sports-car interiors of the period. Each backrest folds forwards and its angle can be adjusted through a rotary control.
Functions
- Provides supportive seating for the driver and passenger
- Maintains a classic, period-inspired cabin appearance
- Allows the backrest angle to be adjusted by rotary knob
- Features folding backrests for improved access
- Supplies coordinated left- and right-hand seats
Technical Details
- Product type: classic bucket seats
- Upholstery: leatherette with houndstooth centre panels
- Quantity: set of two seats
- Configuration: one left-hand and one right-hand seat
- Backrest: folding and angle adjustable
- Seat rails and vehicle-specific adaptors are required separately
Symptoms of Fault
- Torn, split or heavily worn upholstery
- Collapsed padding and reduced seating support
- Loose, squeaking or unstable seat frames
- Backrests that no longer adjust or hold their position
- Excessive movement caused by worn runners or mountings
Why Replacement Matters
Replacing deteriorated seats can restore cabin presentation, seating support and adjustment. This pair is suited to restoration or interior refurbishment where a traditional bucket-seat profile and coordinated upholstery are required. Inspect the existing runners, mounting points and fixings during installation, replacing worn components where necessary.
FAQs
- Does the set include both front seats?
Yes. The set contains one seat for the left side and one for the right side. - Are seat rails and adaptors included?
No. Suitable rails and vehicle-specific mounting adaptors must be selected separately. - Can the backrests be adjusted?
Yes. Each folding backrest has a rotary control for angle adjustment.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Rally ST Bucket Seats, Black Leather or Leatherette, with Black Corduroy, SET OF 2
This pair of Rally ST bucket seats is intended for classic Porsche 356, 911 and 912 interiors from 1950–94. Two black upholstery specifications are offered: genuine leather with a corduroy centre or leatherette with a corduroy centre. Both versions combine period-inspired 1970s styling with a low seating position and pronounced lateral support.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
The Rally ST design supports the driver and passenger through its shaped bucket-seat construction. Integrated belt openings accommodate compatible four-, five- or six-point harness arrangements, while the low mounting position can provide additional seating space for taller occupants. The corduroy centre panels complement the styling of classic Porsche cabins.
Functions
- Provides lateral support through a shaped bucket-seat profile
- Creates a low seating position within the vehicle
- Accepts compatible four-, five- and six-point harness configurations
- Provides matching seats for the left and right sides
- Offers a choice of leather or leatherette outer upholstery
- Complements classic and period-style Porsche interiors
Technical Details
- Quantity: set of two seats, comprising left and right sides
- Available in: black genuine leather with black corduroy centre panels or black leatherette with black corduroy centre panels
- Seat type: fixed-profile race and rally-style bucket seat
- Harness provision: openings for four-, five- and six-point systems
- Seat rails and vehicle-specific mounting adaptors are required separately
Symptoms of Fault
- Torn, split or heavily faded original upholstery
- Collapsed padding that no longer provides consistent support
- Loose seat frames or excessive movement in worn runners
- Poor lateral support from flattened or damaged bolsters
- Squeaks, rattles or movement around the seat mountings
- An interior specification that no longer suits the vehicle's restoration
Why Replacement Matters
Replacing worn seats can restore consistent support and improve the presentation of a classic Porsche interior. These Rally ST seats are also suitable for builds where a low seating position, pronounced bolsters and provision for a compatible multi-point harness are required. Inspect the mounting points, runners and related hardware during installation, replacing worn components where necessary.
FAQs
- What is the difference between the two upholstery options?
One set uses genuine leather around the black corduroy panels, while other uses leatherette with the same corduroy-style centre treatment. - Does the package contain one seat or two?
It contains a matching pair, with one seat for each side of the vehicle. - Are seat rails and mounting adaptors included?
No. Compatible rails and vehicle-specific adaptors must be selected separately. - Can a multi-point harness be used?
The seats include openings intended for compatible four-, five- and six-point harness arrangements. All harness components and mounting points must be correctly specified for the vehicle. - What should be checked during installation?
Confirm the vehicle mounting points, required adaptors, runner condition, fixing hardware and available cabin clearance before fitting.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Rally ST Bucket Seats, Black Leather, SET OF 2
Rally ST bucket seats in black leather, supplied as a set of two for Porsche 356, 911 and 912, 964 models from 1950–94. Based on classic 1970s competition seating, these seats combine a low seating position with pronounced lateral support and a period-style appearance suitable for restoration, rally-inspired and custom interior projects.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
The Rally ST seat supports the driver and passenger through its shaped bucket profile. Its low-mounted design can provide additional seating space for taller occupants, while the integrated belt openings accommodate several multi-point harness configurations.
Functions
- Provides lateral support through a shaped bucket-seat profile
- Creates a low seating position within the vehicle
- Accommodates 4, 5 and 6-point harness layouts
- Introduces a classic 1970s rally-style interior appearance
- Supplies matching seats for the left and right sides
Technical Details
- Model: Rally ST
- Quantity: two seats, covering left and right sides
- Upholstery: black automotive leather, including the side and rear panels
- Frame construction: formed and welded steel tubing
- Frame protection: cataphoretic corrosion-resistant coating
- Padding: heavy-duty, fire-resistant foam
Symptoms of Fault
- Split, cracked or heavily worn seat upholstery
- Collapsed padding that no longer provides consistent support
- Movement, creaking or looseness within the seat frame
- Worn runners or bushes causing the seat to rock
- Damaged mounting points or adjustment mechanisms
- Poor seating posture caused by deteriorated original padding
Why Replacement Matters
Replacing badly worn or unsuitable seats can restore a secure seating position, improve cabin presentation and provide more consistent support. The classic shape is particularly appropriate for period-influenced Porsche restorations and rally-style builds. Correct vehicle-specific rails, adapters and mounting hardware must be selected separately, with all attachment points inspected before installation.
FAQs
- Does the set include two seats? Yes. The Set contains one seat for the left side and one for the right side.
- Are the seat rails and adapters included? No. Compatible rails and vehicle-specific adapters must be selected separately.
- Which harness layouts can be used? The seats have openings for 4, 5 and 6-point harness arrangements. Confirm the complete harness and mounting specification for the vehicle.
- Are the backs and sides leather? Yes. The manufacturer specifies automotive leather across the seating surfaces, side panels and rear panels.
- Will these seats attach directly to original Porsche runners? Installation normally requires suitable seat rails and model-specific adapters. Verify the mounting arrangement before fitting.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Rally ST Bucket Seats, Black Leatherette / Basket Weave, SET OF 2
OE Match Rally ST bucket seats, offered as a set (pair) for Porsche 356, 911, and 912 models from 1950–1994. These seats combine black leatherette upholstery with basket-weave center panels, providing an interior finish true to the era.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
These classic bucket seats provide a low seating position and shaped lateral support for the driver and passenger. Their design is based on competition-inspired seating associated with the 1970s, making the pair suitable for restoration projects and classic Porsche interior upgrades.
Functions
- Provides supportive seating for the driver and passenger
- Creates a low seating position within the cabin
- Offers lateral support through shaped side bolsters
- Provides slots for routing 4-, 5- or 6-point harnesses
- Complements period-style Porsche interiors
- Replaces worn, damaged or unsuitable original seats
Technical Details
- Model: Rally ST
- Contents: two seats, comprising left and right sides
- Upholstery: black leatherette with basket-weave centre panels
- Integrated slots for 4-, 5- and 6-point harness routing
- Steel tube frame construction with corrosion-resistant coating and fire-resistant foam padding
- Vehicle-specific seat rails and adaptors are required separately
Symptoms of Fault
- Torn, split or heavily worn upholstery
- Collapsed padding that reduces support
- Loose frames or movement through worn runners
- Seat rocking under acceleration or braking
- Squeaks or movement around the mounting points
- Poor seating position or inadequate lateral support
Why Replacement Matters
Replacing deteriorated seating can restore cabin presentation, seating support and a secure mounting arrangement. When fitting these seats, inspect the runners, adaptors, mounting points and associated fixings, replacing any worn or unsuitable components. Installation should use the correct vehicle-specific hardware.
FAQs
- Does the set contain two seats? Yes. It contains one left-side and one right-side seat.
- Are seat rails and adaptors included? No. Suitable vehicle-specific rails and mounting adaptors must be obtained separately.
- Can harnesses be routed through the seats? The seats have slots for 4-, 5- and 6-point harness routing. The complete installation must use correctly specified harnesses and mounting hardware.
- What should be checked during installation? Inspect the mounting points, runners, adaptors and fixings, and ensure the seats move freely without binding where adjustable rails are used.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Rally ST Bucket Seats, Black Leatherette / Houndstooth, SET OF 2
The Rally bucket seat pair is intended for Porsche 356, 911 and 912 models from 1950–94. Black leatherette outer sections are combined with houndstooth centre panels to create a period-style interior finish.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
Based on the appearance of competition seats used during the 1970s, the Rally ST features a shaped bucket design intended to provide supportive seating while retaining a classic presentation. Its low seating position can also provide additional accommodation for taller drivers, subject to the rails, adaptors and installation arrangement used.
Functions
- Provides a shaped seating position for the driver and passenger
- Supports a low-mounted installation within the cabin
- Accepts compatible four-, five- or six-point harness arrangements through the integrated belt slots
- Introduces a period-style houndstooth interior detail
- Supplies matching seats for the left and right sides
Technical Details
- Model: Rally ST
- Quantity: set of two seats
- Upholstery: black leatherette with houndstooth centre panels
- Configuration: one left-side and one right-side seat
- Harness provision: slots for four-, five- and six-point harnesses
- Seat rails and vehicle-specific adaptors must be selected separately
Symptoms of Fault
- Torn, split or heavily worn original upholstery
- Collapsed seat padding or reduced support
- Loose seat frames or movement from worn runners
- Creaking, rocking or instability around the mounting points
- An interior finish that no longer suits the intended restoration
Why Replacement Matters
Replacing deteriorated seats can renew cabin presentation, seating support and driving comfort. This matched pair is suitable for restoration and custom interior projects where a 1970s-inspired bucket-seat appearance is required. Inspect existing runners, mounting points and fixings before installation, as worn supporting components can cause unwanted movement even when new seats are fitted.
FAQs
- Does the set include both seats?
Yes. It contains one seat for the left side and one for the right side. - Are seat rails and adaptors included?
No. Compatible rails and vehicle-specific adaptors should be selected separately. - Can these seats be used with a multi-point harness?
The seat design incorporates belt slots for compatible four-, five- and six-point harness arrangements. - Are these seats a direct replacement for every listed Porsche?
Installation requirements vary by model, year and existing seat hardware. Confirm the required rails, adaptors, mounting points and cabin clearance before fitting.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
OE Match rear seat set for Porsche 911 and 912 F-Model applications from 1965–73. Offered with a choice of black leather or leatherette outer upholstery and corduroy centre sections, this set is intended for the selected interior specification.
Fits
Porsche 911 / 912 F-Model 1965 – 1973
What This Product Does
This rear seat set renews the upholstered rear seating area of an early Porsche 911 or 912. Its classic combination of black outer material and corduroy centres is suitable for restoring a worn, incomplete or mismatched interior while retaining a period-style appearance.
Functions
- Replaces worn or damaged rear seat components.
- Restores a consistent finish across the rear seating area.
- Provides a choice of leather or leatherette outer upholstery.
- Complements classic F-Model interior restoration work.
Technical Details
- Position: Rear.
- Supplied as a rear seat set.
- Option one: Black leather with corduroy centre sections.
- Option two: Black leatherette with corduroy centre sections.
- Applications include early SWB and later LWB F-Model cars within the stated fitment.
Symptoms of Fault
- Split seams, tears or damaged upholstery.
- Faded, cracked or heavily marked seating surfaces.
- Compressed or deteriorated seat padding.
- Loose, misshapen or uncomfortable rear seat sections.
- An incomplete or mismatched interior following previous repairs.
Why Replacement Matters
Rear seat materials can deteriorate through age, regular use, sunlight and temperature changes. Renewing badly worn components improves the presentation and usability of the cabin and helps create a more consistent finish during a classic Porsche interior restoration. Inspect the surrounding mountings, hinges and fixings before installation and renew any worn supporting parts as required.
FAQs
- Which upholstery options are available? Select either black leather with corduroy centres or black leatherette with corduroy centres.
- Are both upholstery versions included? No. The set is supplied in the selected leather or leatherette configuration.
- Should the existing fittings be checked? Yes. Examine the mounting points, hinges and associated hardware for wear or corrosion before fitting the replacement set.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
This OE Match rear seat set combines black leather or leatherette upholstery with houndstooth centre panels for Porsche 911 and 912 F-Model interiors from 1965–73. It provides a period-style replacement for ageing, damaged or previously modified rear seating.
Fits:
Porsche 911 / 912 F-Model 1965 – 1973
What This Product Does
The set refreshes the appearance and condition of the rear passenger area while retaining a design associated with classic Porsche interiors. It can be fitted instead of retrimming the original seats, allowing original components to be stored for future restoration or preservation.
Functions
- Replaces worn or damaged rear seat upholstery and assemblies
- Restores a coordinated, period-style cabin appearance
- Provides a choice of black leather or leatherette outer upholstery
- Adds contrasting houndstooth centre panels
- Allows the vehicle's original rear seats to be retained separately
Technical Details
- Product type: rear seat set
- Position: rear passenger compartment
- Outer upholstery options: black leather or black leatherette
- Centre panel design: houndstooth
- Designed to use the original rear seat mounting locations
- Application covers short-wheelbase and long-wheelbase F-Model vehicles within the stated years
Symptoms of Fault
- Cracked, faded or hardened original upholstery
- Split seams or damaged centre panels
- Compressed or deteriorated seat padding
- Loose or misshapen rear seat sections
- Persistent squeaks or movement from ageing components
- An interior finish that no longer matches the intended restoration specification
Why Replacement Matters
Rear seating in an early Porsche can deteriorate through regular use, sunlight, temperature changes and material ageing. Replacing worn assemblies improves cabin presentation and passenger comfort without requiring permanent alteration of serviceable original seats. The houndstooth detailing is particularly suited to period-inspired restorations and interior refreshes.
FAQs
- Is this supplied in leather or leatherette?
The set is offered with a choice of black leather or black leatherette outer upholstery, both with houndstooth centre panels. - Can I keep my original rear seats?
Yes. Using a replacement set allows the original assemblies to be removed and stored rather than retrimmed. - Will it fit both SWB and LWB F-Models?
The supplied applications cover the 1965–68 SWB 911 and 912, plus the 1968–73 LWB 911. Confirm the precise model year before ordering. - Does it use the original mounting locations?
The seat set is designed for installation at the original rear seat mounting points. Existing fixings and surrounding components should be inspected before fitting.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Rear Seat Set by OE Match for Porsche 911 and 912 F-Model applications from 1965–73. This set provides a straightforward way to renew the rear seating area during a restoration or interior refurbishment, with a choice of black leather or leatherette upholstery.
Fits
Porsche 911 / 912 F-Model 1965 – 1973
What This Product Does
The rear seat set replaces aged, damaged or incomplete rear seating in an early Porsche. Its classic black finish is suitable for period-style interiors, while the leather and leatherette options allow the upholstery material to be selected according to the requirements of the vehicle.
Functions
- Renews the rear seating area of the vehicle
- Replaces upholstery affected by age, splits or general wear
- Supports restoration of a consistent, period-style cabin
- Provides a choice of black leather or leatherette
- Complements compatible early Porsche 911 and 912 interiors
Technical Details
- Product type: rear seat set
- Position: rear
- Colour: black
- Upholstery options: leather or leatherette
- Application period: 1965–73 Porsche F-Model
- Supplied as a set
Symptoms of Fault
- Torn, cracked or split upholstery
- Loose or damaged seams
- Collapsed or deteriorated internal padding
- Rear seats that have lost their original shape
- Squeaks or movement from ageing seat components
- An incomplete or mismatched rear interior
Why Replacement Matters
Rear seats in early vehicles can deteriorate through regular use, sunlight, temperature changes and material fatigue. Replacing a heavily worn or incomplete set can improve cabin presentation and provide a more suitable foundation for a period-correct restoration. Check the surrounding mounting points, fixings and adjacent trim during installation, as these components may also show age-related wear.
FAQs
- Is this set available in different upholstery materials?
Yes. It is offered in black leather or black leatherette. - Is this intended for the front or rear of the vehicle?
This is a rear seat set for compatible early Porsche applications. - Should the existing mounting parts be inspected?
Yes. Check the fixings, mounting points and surrounding trim for wear or damage before installation. - Can worn rear seats be restored instead?
Restoration may be possible where the original structure remains serviceable. Replacement is appropriate when components are missing, heavily worn or unsuitable for the intended interior refurbishment.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Seat adaptor set designed for Porsche 911 and 912 models built up to July 1973, allowing the installation of compatible classic and sports seats. Supplied as a pair, with one adaptor for the left-hand seat and one for the right-hand seat.
Vehicle Fitment:
Porsche 911 / 912
Year: Up to 07/1973
Set Includes:
1 x Left seat adaptor
1 x Right seat adaptor
Suitable Seats: Nürburgring / Nürburgring (R) / LeMans / Monza / Spider / Rally ST / Modell14
Important: When fitting the smaller Nürburgring seats, Adaptor 760/1 for 200mm mounting points must also be ordered.
Please note that seat sliders and adaptors are normally both required unless otherwise stated.
If you are unsure which seat adaptor is correct for your Porsche, please contact the DESIGN911 team and we will be happy to assist with compatibility.
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Seat adaptor set designed for Porsche 911 models built from approximately November 1984 to 1994, allowing the installation of compatible classic and sports seats. The adaptors are designed for vehicles with an original seat slider spacing of 410mm and use 8mm fitting bolts. Supplied as a complete left and right pair, with one adaptor for each front seat.
Fits:
Porsche 911 / 964
Year: Approx. 11/1984 to 1994
Suitable Seats: Nürburgring / Nürburgring (R) / LeMans / Monza / Spider / Rally ST / Modell14
Important: When fitting the smaller Nürburgring seats, Adaptor 760/1 for 200mm mounting points must also be ordered.
Please note that seat sliders and adaptors are normally both required unless otherwise stated.
Before ordering, we recommend checking the original seat slider spacing and fixing bolt size on your vehicle. This adaptor is intended for applications with a 410mm distance between the original sliders and 8mm fitting bolts.
If you are unsure whether this is the correct seat adaptor for your Porsche 911, please contact the DESIGN911 team and we will be happy to assist with fitment and compatibility.
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Seat adaptor set designed for Porsche 911 models built from approximately August 1973 to October 1984, allowing the installation of compatible classic and sports seats. The adaptors are designed for vehicles with an original slider spacing of 405mm and use 6mm fixing bolts. Supplied as a complete left and right pair, with one adaptor for each front seat.
Fits:
Porsche 911
Year: Approx. 08/1973 to 10/1984
Set Includes:
1 x Left seat adaptor
1 x Right seat adaptor
Suitable Seats: Nürburgring / Nürburgring (R) / LeMans / Monza / Spider / Rally ST / Modell14
Important: When fitting the smaller Nürburgring seats, Adaptor 760/1 for 200mm mounting points must also be ordered.
Please note that seat sliders and adaptors are normally both required unless otherwise stated.
If you are unsure which seat adaptor is correct for your Porsche, please contact the DESIGN911 team and we will be happy to assist with compatibility.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Seat rail set designed for the installation of compatible sports and classic seats, providing the sliding mechanism required to adjust the seat position.
The rails are supplied as a complete set for both front seats, with components for the left and right seat.
Product Details:
• Product: Seat Rails / Sliders
• Set: Left + Right
• Quantity: Complete set for both front seats
• Application: Seat installation and adjustment
• Suitable for compatible seat installations
These seat rails are intended to be used with the appropriate seat and vehicle-specific seat adaptor where required.
You will receive a set for both the left and right seat.
If you are unsure which seat rails or adaptors are required for your vehicle and seat combination, please contact the DESIGN911 team and we will be happy to assist with fitment and compatibility.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Spider Bucket Seats, Black Leather or Leatherette, SET OF 2
Spider Bucket Seats, Black Leather or Leatherette, SET OF 2 by OE Match for Porsche 356, 911 and 912 models from 1950 to 1994. These classic-style replacement seats are available with black leather or leatherette upholstery and include one seat for each side of the vehicle.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
Designed to replace worn, damaged or unsuitable original seating, these bucket seats combine a period-influenced appearance with shaped support for the driver and passenger. Folding backrests and reclining mechanisms provide practical adjustment while retaining styling suited to classic Porsche interiors.
Functions
- Provides replacement seating for the driver and passenger
- Supports a classic or restored interior appearance
- Offers shaped side support and a defined seating position
- Allows backrest angle adjustment through reclining fittings
- Uses folding backrests to assist access behind the front seats
Technical Details
- Supplied as a set of two seats
- Includes left-hand and right-hand seats
- Choice of black leather or black leatherette upholstery
- Folding backrest with reclining seat fittings
- Seat rails and vehicle-specific adaptors are not included and must be selected separately
- Installation must be checked against the vehicle floor, mounting points and required seating position
Symptoms of Fault
- Torn, cracked or heavily worn upholstery
- Collapsed internal padding or reduced seating support
- Loose frames, rocking seats or movement at the runners
- Damaged or difficult-to-operate recline mechanisms
- Seat backs that no longer fold or lock correctly
- Squeaks, rattles or excessive movement while driving
Why Replacement Matters
Replacing deteriorated seats can restore the cabin presentation, seating comfort and correct operation of the backrest mechanisms. It also provides a practical solution where original frames or upholstery are beyond economical restoration. Correct rails, adaptors and mounting hardware are essential, as seat installation affects driving position and occupant security.
FAQs
- Are both front seats included?
Yes. The set contains one left-hand seat and one right-hand seat. - What upholstery options are available?
The seats are offered in black leather or black leatherette. - Do the backrests adjust?
Yes. Each seat has a folding backrest with reclining fittings. - Are seat rails supplied?
No. Appropriate rails and vehicle-specific adaptors must be ordered separately. - Will these seats attach directly to the original mounting points?
The required installation arrangement depends on the vehicle and fitted rails. Confirm the mounting points, adaptors and seating position before installation.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Sport-Stradale Bucket Seats, Black Leatherette / Basket Weave, SET OF 2
Sport-Stradale B52 bucket seats by OE Match for Porsche 356, 911 and 912, 964 models from 1950–94. This set comprises two high-back seats trimmed in black leatherette with basket-weave centre panels, combining a 1970s-influenced appearance with the support required for sporty road and circuit use.
Fits:
Porsche 356B 1959 – 1963
Porsche 356C 1963 – 1965
Porsche 911 1965 – 1989
Porsche 964 1989 – 1993
What This Product Does
The shaped seat base and substantial side bolsters help hold the driver and passenger in position through corners. A low mounting profile provides useful headroom for taller occupants, while adjustable backrests and a folding function make the seats practical for classic Porsche road interiors.
Functions
- Supports the occupant using a contoured base and pronounced side bolsters
- Provides a low seating position within the cabin
- Accommodates 4-, 5- and 6-point belt arrangements through integrated slots
- Allows backrest angle adjustment through a rotary-wheel mechanism
- Folds forward to help provide access behind the front seats
- Replaces deteriorated seating with a period-inspired sports-seat design
Technical Details
- Model: Sport-Stradale
- Quantity: two seats in left- and right-hand configurations
- Trim: black leatherette with black basket-weave centre panels
- Construction: coated tubular steel frame with fire-resistant foam padding
- Design: high backrest with head restraint and multi-point harness openings
- Seat rails, vehicle-specific adaptors and mounting fittings are not included and must be selected separately
Symptoms of Fault
- Upholstery with splits, fading, loose stitching or worn surfaces
- Compressed padding that has lost its shape or support
- Movement caused by loose frames, runners or mounting points
- Reclining or folding mechanisms that stick or fail to hold position
- Noise from worn seat rails, brackets or fixings
- Corrosion or damage affecting the frame and attachment hardware
Why Replacement Matters
Replacing badly worn seats can restore consistent occupant support, reliable adjustment and the presentation of a classic Porsche cabin. These Sport-Stradale seats also suit period-style interior conversions where a high-back sports-seat profile is preferred. Correct rails, adaptors and fasteners should be used for the specific vehicle, and all mounting points should be checked before installation.
FAQs
- Does the set include two seats?
Yes. It contains left- and right-hand seat configurations. - Are multi-point harnesses compatible?
The seat design includes openings for 4-, 5- and 6-point belt configurations. The complete restraint system must be suitable for the vehicle and its intended use. - Are runners and mounting adaptors supplied?
No. Appropriate seat rails, vehicle-specific adaptors and mounting hardware must be obtained separately. - Can the original seats be stored for later refitting?
Yes. Retaining the original seats, rails and fixings can allow the previous interior specification to be reinstated. - Should the mountings be inspected during installation?
Yes. Check the floor mounting points, rails, brackets and fasteners for wear, damage or corrosion before fitting the replacement seats.
OEMatch Classic Seats — Fit, Finish, Comfort
Classic seats restore period-correct styling and driving comfort for Porsche models by combining traditional proportions with contemporary materials and attention to mounting and ergonomics. OEMatch selections are chosen to support sympathetic restorations and upgrades where authenticity, support and correct mounting are required.
Understanding OEMatch Classic Seats
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original classic seats.
OE (Original Equipment) refers to parts matching original specifications for the classic seats and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM classic seats engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models.
OEMatch provides a wide range of Porsche components and maintains an extensive catalogue of part numbers and cross-references to support restoration projects.
Benefits Include
- Restores period-correct Porsche styling and cabin presentation.
- Improves comfort, posture and lateral support for spirited driving.
- Replacement seat foam and covers renew ergonomics and appearance.
- Compatibility with common mounting rails and sliders where specified.
Why Classic Seats Wear and Fail
- Leather and vinyl can crack, fade or stiffen through UV exposure and temperature cycles.
- Foam padding degrades with age, losing shape and support.
- Stitching and covers may tear or split from use and abrasion.
- Seat frames and mounts can corrode or fatigue, causing noise and reduced security.
The Importance of Replacing with OEMatch Classic Seats
Worn seats reduce comfort, support and interior presentation and can affect control during spirited driving. Replacing or re-trimming seats restores support, maintains period authenticity and addresses corrosion or weakened mounts. For Porsche models, choosing parts that match original mounting points and dimensions helps ensure straightforward installation and a correct finished appearance.
Advantages
- Choice of finishes such as leather, Alcantara or classic vinyl to suit period interiors.
- Availability of seat frames, sliders and mounting hardware to complete a restoration.
- Items selected for Porsche applications and cross-referenced against common part numbers to aid correct specification.
