do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
- Porsche 914 (1970-1976)
Fits:
Porsche 914 1970-76
For Conversion to 5 Lug 911 Wheels.
Features:
• Only rear wheel hubs on the market that allow 5 bolt Porsche wheels to fit onto a 914-4 and retain the stock rear axles
• Direct Bolt-On
• Guaranteed fitment
• Replacement of worn wheel hub instantly reduces wheel play and vibration
• Helps restore original ride quality and load bearing capability
• Quality metals resist wear and driving stress
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9143316055LUG
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Wheel Hub Studs 72mm.
The OE MATCH Wheel Hub Studs 72mm are OE-matching wheel fastening components designed to securely mount the wheel to the vehicle hub. Measuring 72mm in length, these high-strength wheel studs provide the threaded connection between the hub and wheel nuts, ensuring safe wheel retention under all driving conditions. They are particularly suitable for standard applications as well as setups using wheel spacers where additional thread engagement may be required.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Manufactured to OE specifications, these wheel hub studs are engineered for precise fitment, correct thread pitch, and exceptional durability. Constructed from high-strength steel, they are designed to withstand the significant loads generated during acceleration, braking, cornering, and high-performance driving.
What This Product Does:
- Provides a secure threaded mounting point for wheel nuts
- Secures the wheel firmly to the hub assembly
- Maintains correct wheel positioning and alignment
- Supports safe braking, handling, and vehicle stability
- Allows proper wheel installation and torque application
- Provides reliable fastening performance under demanding driving conditions
Symptoms Of Wear Or Failure:
- Stripped or damaged threads
- Corrosion affecting stud strength and thread engagement
- Bent or distorted wheel studs
- Difficulty tightening wheel nuts correctly
- Wheel nuts loosening repeatedly
- Cracks or fatigue damage from repeated stress
- Reduced thread engagement due to wear or damage
Why Replacement Matters:
- Restores safe and secure wheel fastening
- Ensures proper wheel nut engagement and torque retention
- Maintains correct wheel alignment and seating
- Prevents wheel movement or loosening during driving
- Supports safe braking, handling, and suspension performance
- Reduces the risk of wheel fastening failures
- Provides OE-style fitment and long-term reliability
- Helps protect wheels, hubs, and braking components from fastening-related damage
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99334167170
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
Wheel Hub Stud, Standard
Sold each
Replace damaged or worn wheel mounting hardware with this OE
Match Standard Wheel Hub Stud. Wheel studs are pressed into the hub and provide the
threaded mounting points for the wheel nuts. Their condition is essential for
securely locating and retaining the wheel against the hub.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
What Does a Wheel Hub Stud Do?
Each wheel stud passes through the hub and provides a strong threaded fixing for the wheel nut.
When the wheel nuts are correctly tightened, the studs provide the clamping force required to securely hold the wheel against the hub.
A correctly functioning wheel stud helps:
- Secure the wheel to the hub
- Provide the mounting thread for the wheel nut
- Maintain correct wheel clamping force
- Allow safe wheel installation and removal
- Keep the wheel correctly seated against the hub
Why Do Wheel Hub Studs Fail?
Wheel studs are strong components but can become damaged through repeated wheel removal, incorrect tightening or corrosion.
Common causes include:
- Damaged or stripped threads
- Cross-threaded wheel nuts
- Excessive wheel nut torque
- Corrosion Impact damage
- Incorrect wheel installation
- Repeated use of unsuitable tools
- General wear from frequent wheel changes
Using an impact wrench incorrectly or overtightening wheel nuts can stretch or damage the stud and its threads.
When Should a Wheel Stud Be Replaced?
Replacement should be considered if:
- Threads are stripped or damaged
- A wheel nut will not tighten correctly
- The stud is bent or distorted
- Heavy corrosion is present
- The stud has been cross-threaded
- A stud has broken
- The stud is loose within the hub
- Damage is discovered during wheel or brake servicing
A damaged wheel stud should not be reused, as correct wheel clamping depends on the condition of both the stud and wheel nut.
Important Wheel Mounting Checks
When replacing a wheel stud, inspect the wheel nut and hub for corresponding damage.
Wheel nuts should thread smoothly onto the studs by hand before final tightening. Always tighten wheel nuts to the correct specified torque.
If several studs show similar corrosion or thread damage, inspect the remaining studs and consider replacing any that are no longer serviceable.
Wheel Studs
Wheel studs are an essential part of the wheel and hub assembly on many classic and modern-classic Porsche models.
Although designed for long service life, repeated wheel removal, corrosion, cross-threading and excessive tightening can eventually damage the threads or weaken the stud.
When carrying out wheel, brake or hub maintenance, each stud should be inspected for damaged threads, corrosion or distortion. Replacing defective studs helps ensure the wheel can be correctly and securely mounted.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99333167104
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
Front Wheel Hub 40mm
OE Match 40mm front wheel hub for Porsche
356C, early 911 and 912 models. Designed as a replacement for worn, damaged or
corroded original hubs, this component provides the mounting point for the
front wheel and brake assembly while supporting the wheel bearings.
Fits:
- Porsche 356 C 1964-1965
- Porsche 911 (with VIN F >> 030 5100) 1965-67
- Porsche 912 Coupé (with VIN F >> 035 4000) 1965-67
- Porsche 912 Coupé (with VIN F >> 0458 100) 1965-67
Diagram ref no 8
The front wheel hub is an essential part of the vehicle's front axle assembly, allowing the wheel to rotate smoothly while maintaining secure attachment to the suspension and braking system.
Manufactured as an OE-style replacement, this 40mm hub is ideal for classic Porsche maintenance, front axle repairs and restoration projects.
What Does the Front Wheel Hub Do?
The front wheel hub connects the road wheel and brake assembly to the front axle through the wheel bearings.
It provides a secure mounting surface for the wheel and brake disc while allowing the assembly to rotate smoothly around the stationary stub axle.
A correctly functioning hub is important for maintaining wheel alignment, consistent braking performance and predictable steering response.
Why Does It Fail?
Front wheel hubs are designed to withstand considerable loads, but damage or wear can develop over time.
Common causes include:
- Worn or incorrectly adjusted wheel bearings
- Corrosion around bearing mounting surfaces
- Damage from potholes or heavy impacts
- Distortion caused by accident damage
- Wear to wheel stud mounting holes
- Incorrect bearing installation
- Damage during previous repairs
- General age-related deterioration
A damaged hub can affect the correct seating of the wheel bearings, brake disc and wheel assembly.
When Should It Be Replaced?
Replacement should be considered if:
- The hub is cracked, bent or visibly damaged
- Bearing mounting surfaces are worn or scored
- Wheel stud holes are damaged
- Excessive corrosion is present
- The hub has been distorted by an impact
- The wheel or brake disc cannot be correctly mounted
- The original hub is unsuitable for reuse during a front axle rebuild
Excessive wheel movement, vibration or bearing noise may indicate a problem with the hub assembly, although these symptoms can also result from worn wheel bearings or other suspension components.
Checks During Replacement
When replacing the front wheel hub, also
inspect:
- Inner and outer front wheel bearings
- Wheel bearing races
- Front stub axle
- Wheel studs and retaining nuts
- Brake discs
- Bearing seals
- Hub grease cap
- Bearing retaining and adjustment hardware
Wheel bearings should be inspected, correctly lubricated and adjusted to the manufacturer's specifications during installation.
Porsche 356C / 911 / 912 Front Wheel Hubs & Bearing Components
The front wheel hub is a critical component of the classic Porsche front axle assembly. It supports the wheel and brake disc while working with the wheel bearings to provide smooth rotation and secure wheel mounting.
On older Porsche 356C, 911 and 912 models, wheel hubs can become damaged through corrosion, worn bearings, incorrect installation or heavy impacts. Damage to the hub or its bearing mounting surfaces can affect wheel rotation, braking consistency and steering stability.
OE Match 90134106509 provides a 40mm replacement front wheel hub for selected Porsche 356C and early 911/912 models. It is particularly suitable for front suspension repairs, wheel bearing refurbishment and classic Porsche restoration projects.Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134106509
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
Front Wheel Hub 47mm
OE Match 47mm front wheel hub for Porsche 911
models from 1968 to 1973 and Porsche 914-6 models from 1970 to 1972. Designed
as a replacement for worn, damaged or corroded original hubs, this component
provides the mounting point for the front wheel and brake disc while supporting
the wheel bearing assembly.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
Diagram ref no 8
The front wheel hub is an essential component of the vehicle's front axle, allowing the wheel to rotate smoothly while maintaining secure attachment to the braking and suspension systems.
Manufactured as an OE-style replacement, this 47mm hub is ideal for classic Porsche maintenance, front axle repairs and restoration projects.
What Does the Front Wheel Hub Do?
The front wheel hub connects the road wheel and brake disc to the front axle through the wheel bearings.
It provides a secure mounting surface for the wheel while allowing the assembly to rotate smoothly around the stationary stub axle.
A correctly functioning hub is essential for maintaining wheel stability, consistent braking performance and predictable steering response.
Why Does It Fail?
Although front wheel hubs are designed for long service life, damage or wear can develop over time.
Common causes include:
- Worn or incorrectly adjusted wheel bearings
- Corrosion around bearing mounting surfaces
- Damage from potholes or heavy impacts
- Distortion caused by accident damage
- Wear or damage to wheel stud mounting holes
- Incorrect bearing installation
- Damage during previous repairs
- General age-related deterioration
A damaged hub can affect the correct seating of the wheel bearings, brake disc and wheel assembly.
When Should It Be Replaced?
Replacement should be considered if:
- The hub is cracked, bent or visibly damaged
- Bearing mounting surfaces are worn or scored
- Wheel stud holes are damaged
- Excessive corrosion is present
- The hub has been distorted by an impact
- The wheel or brake disc cannot be correctly mounted
- The original hub is unsuitable for reuse during a front axle rebuild
Excessive wheel movement, vibration or bearing noise may indicate a problem with the hub assembly, although these symptoms can also be caused by worn wheel bearings or other suspension components.
Important: Earlier Porsche 356C and early short-wheelbase 911/912 applications use the smaller 40mm front wheel hub, reference 90134106509. Confirm the existing hub specification before ordering.
Checks During Replacement
When replacing the front wheel hub, also
inspect:
- Inner and outer front wheel bearings
- Wheel bearing races
- Front stub axle
- Wheel studs and retaining nuts
- Brake discs
- Bearing seals
- Hub grease cap
- Bearing retaining and adjustment hardware
Wheel bearings should be inspected, correctly lubricated and adjusted to the manufacturer's specifications during installation.
Porsche 911 / 914-6 Front Wheel Hubs & Bearing Components
The front wheel hub is a critical component of the classic Porsche front axle assembly. It supports the wheel and brake disc while working with the wheel bearings to provide smooth rotation and secure wheel mounting.
On older Porsche 911 and 914-6 models, wheel hubs can become damaged through corrosion, worn bearings, incorrect installation or heavy impacts. Damage to the hub or its bearing mounting surfaces can affect wheel rotation, braking consistency and steering stability.
OE Match 90134106510 provides a 47mm replacement front wheel hub for Porsche 911 models manufactured between 1968 and 1973 and Porsche 914-6 models from 1970 to 1972. It is particularly suitable for front suspension repairs, wheel bearing refurbishment and classic Porsche restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134106510
The product you are viewing cross references to these numbers