do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Carburetors & Parts
By OE Match
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
The spacer is designed to sit between the carburettor base (typically a SOLEX 40 PII-4) and the intake manifold on classic Porsche models - 356 B/356 C and 912, manufactured to match Porsche OE specification.
Sold each, 4 required per vehicle.
Fits:
Porsche 912 1965 - 1969
Porsche 356 B/C 1600/S90/SC 1960 - 1965
Diagram ref no 2 (for 912) or 4 (for 356)
This spacer provides the correct separation and sealing interface, ensuring proper carburettor alignment, uniform port matching and preventing heat soak from the manifold into the carburettor. It is manufactured from a high-temperature-resistant to replicate the original design and maintain correct insulating properties.
Ideal for engine rebuilds, intake servicing or performance restoration, this spacer restores the intended clearance, port geometry, and sealing integrity required for reliable induction performance in classic Porsche engines.
Over time, the original spacer can deteriorate, warp or crack because of exposure to heat cycling, vibration and fuel vapour. A compromised spacer may lead to vacuum leaks, mis-metered fuel/air mixture, uneven idle or reduced performance.
Replace this spacer when:
• Performing a carburettor or intake manifold service or rebuild
• The original spacer is cracked, delaminated or missing
• Vacuum leaks or rough idle suggest induction sealing problems
• Restoring a classic Porsche engine to factory specification
Fitting new spacer ensures the correct spacing, proper sealing and authentic air-flow behaviour you need for lasting engine performance and reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610839000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Choke: 32mm
Main: 125mm
Air:180 mm
Idle: 55mm
Emulsion tube:F11
Fits:
Porsche 356 B Super 90 1.6 01/59-12/63
Porsche 356 C SC 1.6 01/63-12/65
Porsche 912 1.6 01/65-02/70
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610810
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Carburettor Fuel Level Measuring Device – Solex / Zenith with Zenith Injection Quantity Tester
Accurately check and set carburettor fuel levels with this
specialist measuring kit for Solex and Zenith carburettors.
Fits:
- Porsche 912 SWB 1965-1968 (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Designed to measure the fuel level while the carburettor is operating, the kit uses a transparent sight glass connected directly to the carburettor. This allows the actual fuel level inside the float chamber to be viewed and compared with the manufacturer's specified setting.
Three rings on the sight glass provide clear visual reference points when checking the fuel level.
The kit also includes a special injector for Zenith NDIX carburettors, allowing the accelerator pump injection quantity to be measured according to the relevant workshop repair procedure.
What Does the Carburettor Level Measuring Kit Do?
Correct fuel level inside the float chamber is essential for accurate carburettor operation.
If the level is too high, excessive fuel can enter the engine, potentially resulting in an overly rich mixture, poor running and increased fuel consumption. If the level is too low, insufficient fuel supply can contribute to hesitation and weak running, particularly when greater fuel delivery is required.
This tool allows the fuel level to be observed directly while the carburettor is operating rather than relying solely on measurements taken with the carburettor dismantled.
The three rings fitted to the sight glass act as convenient visual references for comparing the measured fuel level with the specification given in the appropriate repair guide.
How Is the Kit Used?
Different adaptors supplied with the kit allow the sight glass to be connected to several Solex and Zenith carburettor types.
For Solex 40 PII carburettors, the extended special main nozzle carrier is installed with the main nozzle fitted into the carrier. The sight glass can then be connected so the operating fuel level can be observed.
For Solex PICT carburettors, the supplied banjo bolt and sight glass are fitted to the float chamber.
For Solex PBIC and PICB carburettors, the corresponding extended main nozzle carrier supplied with the kit is used.
For Zenith NDIX carburettors, the sight glass is installed using the long banjo bolt and supplied spacer.
Once connected, the carburettor can be operated and the fuel level viewed through the sight glass. The measured level should then be compared with the specification given in the relevant manufacturer's repair guide.
Zenith NDIX Injection Quantity Measurement
The kit also provides a method of checking the accelerator pump injection quantity on Zenith NDIX carburettors.
The supplied special Zenith injector operates differently from the normal injector. Instead of delivering fuel into the injection pipe, it directs the fuel outwards.
The discharged fuel can then be collected in a suitable graduated glass measuring cylinder and the quantity compared with the specification in the appropriate repair guide.
Please note that the measuring cylinder is not included.
This provides a practical way of checking whether the accelerator pump is delivering the specified quantity of fuel and allows adjustments to be made where required.
Why Is Correct Carburettor Fuel Level Important?
The float chamber must maintain the fuel at the correct height for the carburettor circuits to operate as intended.
Incorrect fuel levels can affect mixture strength and
general engine behaviour and may contribute to:
- Rich or lean running
- Poor idle quality
- Hesitation during acceleration
- Difficult starting
- Excessive fuel consumption
- Inconsistent carburettor performance
- Poor response when accelerating
Accurately checking the fuel level is therefore an important part of carburettor setup, troubleshooting and synchronisation.
Ideal for Carburettor Setup and Rebuilding
This kit is particularly useful when rebuilding, setting up or diagnosing classic Solex and Zenith carburettors.
It provides a direct visual method of checking the operating fuel level and, with Zenith NDIX applications, an additional method of measuring accelerator pump injection quantity.
It is suitable for professional workshops, engine builders and experienced enthusiasts carrying out accurate carburettor servicing and adjustment.
Scope of Delivery
- 1 x sight glass with 3 reference rings
- 1 x main nozzle carrier for Solex 40 PII
- 1 x banjo bolt for Solex PICT
- 1 x main nozzle carrier for Solex PBIC/PICB
- 1 x banjo bolt with adaptor for Zenith NDIX
- 1 x special injector for Zenith NDIX
- 1 x Zenith fibre gasket
- 3 x fibre seals for sight glass/Solex
The correct fuel levels and injection quantities should always be taken from the relevant workshop or repair guide for the specific carburettor and application.
Solex & Zenith Carburettor Setup, Tuning & Measuring Tools
Correct carburettor adjustment is essential for achieving smooth running, reliable starting and good throttle response on classic Porsche and other vehicles equipped with Solex or Zenith carburettors.
Specialist carburettor measuring tools make it possible to diagnose and adjust areas that cannot be accurately assessed through basic external adjustment alone. Checking the float chamber fuel level and accelerator pump delivery can be particularly useful when rebuilding carburettors or investigating poor running, hesitation or inconsistent fuelling.
This Solex and Zenith carburettor level measuring kit supports Solex 40 PII, PICT, PBIC/PICB and Zenith NDIX applications using the dedicated adaptors supplied.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
Sold each - 1 required per carburettor
Fits:
Porsche 356 / 356A - 1950 to 1959
Porsche 911 - 1965 to 1968
For Curburettors
356 / 356A
Solex 32 PBI
Solex 32 PBIC
Solex 40 PBIC
Solex 40PII / 40 PII-4
911
Solex 40 PI-1
Diagram ref no 19
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610099100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
This diaphragm is manufactured to match Porsche OEM specifications, used in the carburettor/fuel pump assembly of early Porsche models such as the 356 B/C and 912 (Solex 40 PII-4 systems). This diaphragm ensures correct movement of the pump or fuel-metering circuit, maintaining consistent fuel delivery, avoiding starvation under load, and preserving the original throttle response characteristics.
Fits:
Porsche 356B / 356C (Model: 1600 S90/SC, CARRERA, 587/1 692/3A) 1960-1965
Porsche 912 1.6L 1965 - 1969 (Engine code: 616/36/37)
Porsche 912 1.6L 1965 - 1969 (Engine code: 616/39/40)
Diagram ref no 64
• Function: Flexes to actuate fuel-pump or carburettor component; maintains consistent fuel flow and pressure
• Position: Inside carburettor body or fuel pump assembly
• Benefits: Exact fit geometry, reliable sealing, restores factory fuel-delivery behaviour
• Installation: Replace during carburettor rebuild or fuel-system service; Ensure correct mounting orientation and inspect surrounding seals/gaskets.
Diaphragms in carburettor or fuel-pump assemblies are subject to continuous flexing, contact with fuel/ vapour, and ageing of elastomer materials. Over time the diaphragm may become hardened, cracked, or leak, leading to inconsistent fuel delivery, hesitation under acceleration or poor idle.
Replace this diaphragm when:
• Performing a carburettor rebuild, fuel-pump service or full engine commissioning
• The existing diaphragm shows visible cracks, deformation, fuel seepage or stickiness
• You experience fuel starvation, erratic throttle response or tuning instability
• You’re restoring your classic Porsche engine to factory-correct performance
Installing a new diaphragm restores correct actuation, sealing and fuel-flow behaviour—ensuring your induction system runs true, smooth and as intended.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG10095100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Complete mechanical diaphragm fuel pump is designed to replace the original Porsche unit (692-100-969-00) fitted to Porsche 356 and 912 engines. This pump supplies fuel from the tank to the carburetors under consistent pressure, ensuring smooth, reliable delivery across all driving conditions.
Fits:
Porsche 912 1.6L 1965 - 1968 (engine code: 616/36/37)
Porsche 356 B/C - 1600 S90/SC, CARRERA, 5871,6923A - 1960 - 1965
Diagram ref no 62
• Function: Draws fuel from tank and maintains steady flow to carburetors
• Benefits: OE flow pressure, reliable operation, corrosion resistance, vintage design
• Installation: Direct-fit replacement; gasket included; torque to Porsche specs
Mechanical fuel pumps operate continuously with every engine revolution. Over time, diaphragms harden, check valves wear, and housing seals degrade, leading to reduced fuel pressure, vapor lock, or leakage.
Replace this unit when:
• Experiencing hard starting or hesitation under load
• Fuel leaks or pressure drops are detected
• Original pump shows corrosion or mechanical wear
• Performing a fuel system or carburetor overhaul
Installing a new Diaphragm pump restores reliable fuel delivery, authentic engine bay appearance, and dependable performance — keeping your classic Porsche running like it should.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
69210096900
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
5 Needed - Sold each.
Fits:
for cars with Carburateur PALLAS - ZENITH 32 NDIX
Porsche 356 / 356A 1950-59
Porsche 356B / 356C - 1600 /S/C 1960-65
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610087700
The product you are viewing cross references to these numbers
- Porsche 356C 1963-65
Maintain the efficiency and safety of your Porsche's crankcase ventilation system with this OE Match Flame Arrester for Oil Vapour Breather Hose, manufactured as a direct replacement. Produced to OE-style specifications, this flame arrester is designed to fit within the oil vapour breather hose, helping to prevent ignition from travelling back into the crankcase while allowing crankcase vapours to flow safely through the breather system.
Fits:
- Porsche 356C 1963-65
Over time, flame arresters can become blocked by oil deposits, sludge, or contamination, restricting crankcase ventilation and reducing the efficiency of the engine breather system. Corrosion or physical damage can also compromise their effectiveness. Replacing a worn or blocked flame arrester restores correct ventilation performance and helps maintain safe engine operation. This OE Match component is ideal for routine maintenance, engine servicing, repairs, and Porsche restoration projects.
What This Product Does:
- Prevents flame from travelling through the crankcase breather system.
- Allows crankcase vapours to flow safely through the breather hose.
- Supports efficient crankcase ventilation.
- Helps maintain correct crankcase pressure.
- Reduces the risk of ignition within the breather system.
- Replaces blocked, corroded, or damaged original flame arresters.
- Provides an OE-style fit and dependable quality.
Symptoms Of Wear Or Failure:
- Restricted crankcase ventilation.
- Excessive crankcase pressure.
- Oil leaks caused by breather system pressure build-up.
- Sludge or heavy contamination within the flame arrester.
- Visible corrosion or physical damage.
- Increased oil vapour around the engine.
- Age-related deterioration of the breather system components.
Why Replacement Matters:
- The flame arrester is an important safety component within the crankcase ventilation system, allowing engine vapours to pass through the breather hose while helping to prevent flame from propagating back into the crankcase. A blocked, damaged, or deteriorated flame arrester can restrict ventilation, increase crankcase pressure, contribute to oil leaks, and reduce the overall efficiency of the engine breather system.
- Replacing the flame arrester restores proper crankcase ventilation and helps maintain safe, reliable engine operation while protecting associated breather components. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match flame arrester for the oil vapour breather hose provides the correct fit, dependable quality, and long-lasting durability, making it an excellent choice for Porsche maintenance, repairs, and restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610822200
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Float Valve precisely regulates the fuel level within the carburetor float bowl of the Solex 40 PII-4 system, as used on Porsche 356 B/C and 912 engines. It operates via a tapered needle and seat mechanism that opens and closes the fuel inlet based on float movement, maintaining the correct 1.75 mm flow aperture and consistent bowl height.
Fits:
Porsche 356B / 356C (Model: 1600 S90/SC, CARRERA, 587/1 692/3A) 1960-1965
Porsche 912 1.6L 1965 - 1969 (Engine code: 616/36/37)
Porsche 912 1.6L 1965 - 1969 (Engine code: 616/39/40)
Diagram ref no 46
Manufactured to replicates Porsche’s original geometry and sealing quality. It’s ideal for carburetor rebuilds, tuning, or replacing worn valves that cause flooding, lean conditions, or erratic mixture balance.
• Function: Regulates fuel entry to float bowl by closing inlet as float rises
• Fitment: Porsche 356 B/C and 912 with Solex 40 PII-4 carburetors
• Position: Inside float chamber cover (fuel inlet port)
• Flow Size: 1.75 mm – OE spec calibration
• Benefits: OE-style geometry, precise fuel control, leak-free sealing, reliable idle and acceleration
• Installation: Replace valve during carb rebuild; verify float height and seal tightness
Float valves wear naturally from constant fuel pressure, vibration, and ethanol exposure. As the tip or seat degrades, it can cause fuel overflow, hard starting, or lean running.
Replace this part when:
• Rebuilding the carburetor or adjusting float levels
• You notice fuel leakage, overflow, or inconsistent idle
• The needle shows grooves or corrosion on the tip
• Restoring carburetors to factory spec for balanced mixture control
Installing a new Float Valve ensures accurate bowl levels, steady fuel flow, and reliable operation of your classic Porsche 356 or 912’s Solex carburetors.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610097101
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356 A
Porsche 356 B
Porsche 356 C
Diagram ref no 49
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
616080420
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Carburettor diaphragm pump seal for classic Porsches with Solex engines. Manufactured to OE geometry, it restores a tight seal between the pump cover and carburettor body, stabilizing injection volume and preventing seepage that can cause flat spots, difficult starting, or fuel odour. It fits directly into the above applications—ideal for carburettor rebuilds or any pump service.
Sold each.
Fits:
Porsche 356 / 356A 1955 - 1959 with Solex 32 PBI / PBIC
Porsche 356B / 356C (Model: 1600 S90/SC, CARRERA, 587/1 692/3A) 1960-1965
with SOLEX-40 PII-4/44 PII-4
Porsche 912 1.6L 1965 - 1969
with: Engine code: 616/36/37, 616/39/40
with SOLEX-40 PII-4
Diagram ref no 66
• Function: Seals diaphragm pump cover to carb body; maintains correct pump shot
• Position: Carburettor—accelerator/fuel pump section
• Benefits: Leak-free sealing, consistent tip-in enrichment, OE geometry for easy install
Over time, the diaphragm pump gasket can harden, tear, or deform, leading to small fuel leaks or inconsistent carburettor performance.
Replace the gasket whenever:
• The old gasket appears brittle, cracked, or fuel-soaked.
• You notice inconsistent accelerator pump delivery or hesitation when pressing the throttle.
• Performing a carburettor rebuild or replacing the pump diaphragm.
• As preventive maintenance on long-stored vehicles or engines exposed to modern ethanol-blended fuels.
Installing a fresh Gasket ensures a secure seal, stable fuel pressure, and smooth accelerator pump operation — preserving proper drivability and performance in your Porsche 356 or 912.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610095700
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
2 sets required per car
Fits:
Porsche 356 / 1.3S 1950 - 1955
Porsche 356A 1.6L 1955-1957
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61608901
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Sold each - 1 required per carburettor
Fits:
Porsche 356 / 356A - 1950 to 1959
Porsche 356B / 356C - 1959 to 1965
Porsche 911 - 1965 to 1968
Porsche 912 - 1965 to 1968
For Curburettors
356 / 356A
Solex 32 PBI
Solex 32 PBIC
Solex 40 PBIC
Solex 40PII / 40 PII-4
911 / 912
Solex 40 PI-1
Solex 40 PII-4
Diagram ref no 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610095600
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Sold each, 2 required per engine.
Fits:
Porsche 912 1965 - 1968 (Engine code: 616/36/37)
* for Carburettor SOLEX-40 PII-4
Porsche 356B 1600 S90 1960 - 1962
Porsche 356C SC 1964 - 1965
* for Carburettor SOLEX-40 PII-4/44 PII-4
Diagram ref no 34
• Position: Carburettor – idle fuel circuit
• Function: Controls idle fuel flow for stable low-speed engine operation
• Precision-calibrated to match the factory specification (“U 1.8”) for stable idle fuel delivery.
• Direct-fit OE geometry ensures correct installation in Solex 40 PII-4 carburettors without adjustment.
• Optimized performance for reliable starts, smooth idling, and accurate throttle response in classic Porsche engines.
• Ideal for restorations, tuning, or routine maintenance where drivability and period-correct operation are key.
Over time, idle jets can become clogged, worn, or corroded, affecting the carburettor’s ability to meter fuel correctly at low speeds.
Common symptoms of a failing or blocked idle jet include:
• Rough or uneven idling Hard starting when cold
• Hesitation or flat spots on throttle tip-in
• Excessive fuel smell or poor fuel economy
Replace the idle jet whenever:
• Performing a carburettor rebuild or tuning service
• You detect uneven idle or mixture issues
• The old jet shows visible damage, corrosion, or deposits
• The vehicle has been stored for long periods or exposed to ethanol-blended fuels
Installing a new idle jet restores accurate fuel metering, ensuring your classic Porsche runs smoothly and maintains its original performance characteristics.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610090202
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Sold each
Fits:
Porsche 911 - 1965 to 1968
Porsche 356B S90 - 1960 to 1962
Porsche 356C SC - 1964 to 1965
For carburettors
911
Solex 40 PI-1
356
Solex 40 PII-4
Solex 44 PII-4
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610090103
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
This intake manifold fitting is designed to replicate the original intake manifold connection flange used with Solex carburetors on classic Porsche 356 and 912 engines. Includes flanges, gaskets, and pins — precision-made for Solex carburetors to restore OE sealing and performance.
SET OF 2.
Fits:
Porsche 356 1600 S90/SC 1960 - 1965
Porsche 912 1965 -1969
Diagram ref no 2, 3, 4, 5.
This fitting forms the essential junction between the intake manifold runner and the cylinder head, ensuring an airtight, stable connection that delivers balanced airflow and fuel mixture to each combustion chamber.
Manufactured from high-grade cast aluminium alloy, its matches Porsche’s original dimensions and port geometry, guaranteeing accurate fitment and smooth intake flow. Its machined sealing surfaces ensure reliable gasket compression and prevent air leaks that can lead to poor idle or misfiring.
When installed as a pair (set of two), these fittings provide complete support for dual-carburetor configurations, restoring authentic engine response and drivability.
The intake fittings on classic Porsche engines are exposed to years of heat cycling, vibration, and fuel vapors, which can lead to warping, corrosion, or leakage at the sealing surfaces.
Replace this fitting when:
• Performing a carburetor or manifold rebuild
• You detect vacuum leaks or poor idle quality
• Original fittings show cracks, corrosion, or distortion
• Restoring an engine to factory intake specification
Installing a new ensures precise airflow distribution, correct carburetor mounting, and reliable intake sealing — restoring smooth idle, balanced performance, and classic Porsche driveability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610803301
The product you are viewing cross references to these numbers
-
Carburettor / SOLEX 32PBJ / SOLEX 40PJCB / And Fuel supply line 356A 1955-1959 107-005
-
Carburettor / PALLAS-ZENIT 32NDIX / And Fuel supply line (Model: 1600, 1600 S) 356A 1955-1959 107-010
-
Single parts for Carburettor - SOLEX 32 PBI - 356, 356A 1950-1959 107-015
-
Single parts for Carburettor - SOLEX 32 PBIC - 356, 356A 1950-1959 107-020
-
Single parts for Carburettor - PALLAS - ZENITH 32 NDIX - 356, 356A 1950-1959 107-025
-
Single parts for Carburettor - SOLEX 40 PBIC - M >> 81 200 (Model: 527/528, 1600 S) 356, 356A 1950-1959 107-030
-
Single parts for Carburettor - SOLEX 40 PII / SOLEX 40 PII-4 - M 90 501 >> 91 000 (Model: CARRERA 1500 GS/GT) 356, 356A 1950-1959 107-050
-
Carburettor and Fuel supply line (Model: 1600, 1600 S, 1600 S90) 356B / 356C 1960-1965 107-000
-
Single parts for Carburettor PALLAS - ZENITH 32 NDIX (Model: 1600 /S/C) 356B / 356C 1960-1965 107-010
-
Single parts for Carburettor SOLEX-40 PII-4/44 PII-4 (Model: 1600 S90/SC, CARRERA, 587/1 692/3A) 356B / 356C 1960-1965 107-015
-
Gasket set / Engine / Crankcase / Piston rings 356B / 356C 1960-1965 198-000
OEMatch Carburettors & Parts — Durability, Sealing, Performance
OEMatch supplies carburettors, rebuild kits and service parts for Porsche models, covering repair, restoration and tuning needs. OEMatch carburettors & parts are compatible replacements engineered to original-spec dimensions and tolerances — a practical option when genuine or OEM parts are unavailable. The range supports routine maintenance and sympathetic restorations.
Available Types
- Complete carburettor assemblies and throttle bodies
- Rebuild kits with jets, needles and diaphragms
- Gaskets, floats and sealing components
- Linkage, choke and balancing hardware
Understanding OEMatch Carburettors & Parts
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original carburettors & parts.
OE (Original Equipment) refers to parts matching original specifications for the carburettors & parts and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM carburettors & parts engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models. OEMatch also maintains an extensive catalogue tailored to Porsche applications, cataloguing thousands of part numbers and numerous original-equivalent cross-references while continuing to develop additional items for classic model support.
Benefits Include
- Restored fuel metering for smooth throttle response and consistent running
- Improved cold starting and idle stability after rebuilds
- Elimination of leaks and reduced chance of fuel seepage from perished seals
Why Carburettors & Parts Wear and Fail
- Varnish and deposits from aged fuel blocking jets and passages
- Deterioration of gaskets, diaphragms and seals causing air leaks
- Mechanical wear to floats, needles and linkage leading to incorrect fuel levels
The Importance of Replacing with OEMatch Carburettors & Parts
Timely replacement of worn carburettor components helps preserve engine smoothness, avoids lean or rich running that can damage valves or pistons, and keeps period-correct throttle behaviour for heritage Porsches. Careful selection of rebuild kits and seals reduces the need for repeated adjustments and supports reliable starting and driveability across varied conditions.
Advantages
- Direct-fit alternatives made to original-spec dimensions and tolerances
- Extensive part coverage and documented cross-references for Porsche models
- Options that span complete assemblies to individual service items for staged restoration
-
Intermediate shaft (IMS)
-
Oil System Parts
-
Fuel System Parts
-
Gaskets & Sets
-
Belts / Tensioners / Rollers
-
Timing covers and gaskets
-
Engine Bearings / Shells
-
Engine Valves / Guides / Springs
-
Rocker Arms & Tappets
-
Engine Bolts / Studs
-
Piston Rings
-
Engine Cylinders / Liners / Pistons
-
Cylinder Head / Camshaft Carrier
-
Camshaft covers / Gaskets
-
Camshafts
-
Crankcase Parts
-
Crankshaft & Parts
-
Engine Tinware
-
Air Intake & Injection
-
Specialist Tools
