do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Front Wiper Arms & Blades
By OE Match
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356 B-T6
Porsche 356C
Click 'Zoom in' for large parts diagram.
Diagram ref no 31 and 32.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462829212
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
Fits:
Fits Speedster, Convertible D, Roadster
Porsche 356 1955-1963
Diagram ref no 20 and 21.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462829240
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
- Porsche 356C 1963-65
This OE Match windscreen wiper cap nut is a replacement fastening component for Porsche 356 wiper assemblies.
Fits
- Porsche 356 B-T6
- Porsche 356C
Diagram reference 36
What This Product Does
The cap nut forms part of the windscreen wiper assembly, fitting at the wiper shaft and arm connection. It replaces a missing, damaged or deteriorated fastener while maintaining the correct arrangement of the original-style wiper hardware.
Functions
- Fits the windscreen wiper shaft assembly
- Helps retain the wiper arm connection
- Covers the exposed threaded fastening point
- Supports a tidy, period-correct wiper installation
Technical Details
- Brand: OE Match
- Component: windscreen wiper cap nut
Symptoms of Fault
- Cap nut missing from the wiper shaft
- Visible corrosion or surface deterioration
- Damaged threads preventing correct fastening
- Loose or incomplete wiper arm hardware
Why Replacement Matters
Replacing a worn or absent cap nut restores the correct fastening arrangement at the wiper shaft. It is also suitable when renewing weathered wiper hardware during maintenance or restoration work.
FAQs
- Is this a complete wiper assembly?
No. This product is the individual windscreen wiper cap nut. - Which Porsche models does it fit?
It is listed for Porsche 356 B-T6 and 356C models. - Where is the part shown on the assembly diagram?
The cap nut is identified as diagram reference 36.
Check fitment for your specific vehicle model and year before ordering.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462828412
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356B T6
Porsche 356C
Diagram ref no 28
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462802512
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
Fits:
Porsche 356 Pre-A / 356 A (through 1958) Coupe, Cabriolet & Speedster
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462830100
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
Windshield Wiper Blade
Sold each - 2 required per car
Maintain clear visibility and preserve the authentic
appearance of your classic Porsche with this OE Match Windshield Wiper Blade,
manufactured to OE specifications for a precise fit and dependable wiping
performance. Designed as a direct replacement for the original component, this
high-quality wiper blade ensures efficient removal of rain, road spray and
dirt, helping you drive safely in all weather conditions.
Fits:
- Porsche 356A 1955-59
- Porsche 356B 1959-63
A properly functioning wiper blade is essential for maintaining visibility and protecting the windscreen from damage caused by hardened or deteriorated rubber. Whether you're completing a concours restoration, refreshing your exterior trim or carrying out routine maintenance, this OE Match replacement offers the quality, durability and factory-style appearance expected for a classic Porsche.
What Does the Windshield Wiper Blade Do?
The windshield wiper blade is responsible for maintaining a clear field of vision by sweeping water, dirt and debris from the windscreen.
Its primary functions include:
- Removing rainwater from the windscreen.
- Clearing road spray and grime.
- Improving visibility during poor weather.
- Reducing smearing and streaking.
- Helping maintain safe driving conditions.
- Providing smooth and consistent wiping performance.
A high-quality wiper blade ensures maximum contact with the windscreen for efficient cleaning without damaging the glass.
Why Replace the Windshield Wiper Blade?
Wiper blades are service items that naturally wear with age and regular use.
Common causes of deterioration include:
- UV exposure causing rubber to harden.
- Cracked or split wiping edge.
- Loss of flexibility. Wear from repeated use.
- Dirt and debris damaging the rubber.
- Corrosion of the supporting frame.
- Long periods of vehicle storage.
Replacing worn blades restores clear visibility and helps prevent scratches to the windscreen caused by damaged rubber.
Symptoms of a Worn Wiper Blade
Signs that replacement is required include:
- Smearing across the windscreen.
- Streaks remaining after wiping.
- Chattering or skipping during operation.
- Squeaking noises.
- Uneven wiping performance.
- Torn or cracked rubber.
- Reduced visibility in wet weather.
- Corrosion or damage to the blade frame.
Replacing the blade at the first signs of wear helps
maintain optimum visibility and driving safety.
Benefits
- Restores clear windscreen visibility.
- Improves driving safety in wet weather.
- Reduces streaking and smearing.
- Protects the windscreen from damage caused by worn blades.
- Smooth and quiet wiping action.
- Long-lasting construction.
- Direct replacement for the original blade.
Installation Recommendations
For the best results, inspect the complete windscreen wiping
system when replacing the blade, including:
- Wiper arms.
- Wiper arm springs.
- Wiper spindle assemblies.
- Wiper linkage.
- Wiper motor.
- Windscreen washer jets.
- Washer hoses and reservoir.
Maintaining the complete wiping system ensures reliable operation and maximum visibility.
Why Choose OE Match Wiper Components?
OE Match wiper components are manufactured to provide factory-quality fitment, reliable operation and long-lasting durability for classic Porsche models. Produced using quality materials and precision manufacturing techniques, this windshield wiper blade delivers excellent wiping performance while maintaining the original appearance of your vehicle. It is an ideal replacement for restorations, routine servicing and preventative maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462831110
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
Restore the correct installation and secure retention of your windscreen wiper assembly with this OE Match Windshield Wiper Hexagon Nut, manufactured as a direct replacement. Produced to OE-style specifications, this hexagon nut is designed to securely fasten the windscreen wiper arm to the wiper spindle, ensuring reliable operation of the wiper system while maintaining the correct fit and appearance.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 356A 1955-59
- Porsche 356B 1959-63
Diagram Ref No 23
Over time, the original retaining nut can become corroded, rounded, damaged, or misplaced during servicing, reducing its ability to securely clamp the wiper arm. This can lead to movement, slippage, or unreliable wiper operation. Replacing worn or damaged hardware helps restore the integrity of the wiper assembly and is recommended during routine maintenance, wiper system repairs, and Porsche restoration projects.
What This Product Does:
- Secures the windscreen wiper arm to the wiper spindle.
- Maintains the correct clamping force for reliable operation.
- Prevents movement or loosening of the wiper arm during use.
- Supports safe and effective windscreen wiping performance.
- Replaces worn, corroded, or damaged original retaining hardware.
- Maintains the correct appearance of the wiper assembly.
- Provides an OE-style fit and dependable quality.
Symptoms Of Wear Or Failure:
- Loose or moving windscreen wiper arm.
- Wiper arm slipping on the spindle.
- Corroded or seized retaining nut.
- Rounded or damaged hexagon flats.
- Missing retaining hardware.
- Difficulty securing the wiper arm correctly.
- Wiper system refurbishment requiring replacement fixings.
Why Replacement Matters:
- The windshield wiper hexagon nut is a small but essential fastening component that securely retains the wiper arm on the spindle. If the nut becomes loose, damaged, or corroded, the wiper arm can slip during operation, reducing wiping effectiveness and potentially compromising visibility in poor weather.
- Replacing the retaining nut restores the correct clamping force and ensures the wiper arm remains securely attached during operation. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match hexagon nut provides the correct fit, dependable quality, and long-lasting durability, making it an excellent choice for Porsche maintenance, repairs, and restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462829600
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
Wiper Arm Base
The OE Match Wiper Arm Base is a replacement mounting
component designed for the windscreen wiper assembly on Porsche 356 Pre-A
models.
Fits:
- Porsche 356 1950-55
Fits to no 11 on diagram
This component helps provide a secure mounting point for the wiper arm, maintaining correct positioning and reliable operation of the windscreen wiper system. Ideal for classic Porsche restoration and maintenance.
What Does It Do?
The wiper arm base supports the connection between the wiper arm and its mounting assembly, helping maintain correct alignment and effective windscreen wiping.
Why Does It Fail?
Common causes include:
- Corrosion and weather exposure
- Wear around mounting points
- Damage during wiper arm removal
- Age-related deterioration
- Loose or damaged fittings
When Should It Be Replaced?
Replace the wiper arm base if it becomes damaged, corroded or loose, or if the wiper arm no longer sits correctly.
Replacement may also be necessary during windscreen wiper refurbishment or vehicle restoration.
Confirm compatibility with the original wiper arm and mounting arrangement before ordering.
Checks & Diagnosis
Inspect the base for corrosion, cracks and excessive movement. Check that the wiper arm is securely attached and moves through its intended sweep without obstruction.
Installation Notes
Inspect and clean the mounting area before fitting. Ensure the wiper arm base is securely installed and check the wiper arm alignment and operation after assembly.
Porsche 356 Pre-A Windscreen Wiper Arms & Mounting Parts
Maintaining the windscreen wiper assembly is essential for visibility and preserving the original appearance of early Porsche 356 models.
The OE Match Wiper Arm Base provides a replacement for worn or damaged mounting components, helping restore correct wiper arm positioning and operation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
35661481
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
Fits:
Porsche 356A Coupe - 1956 to 1959
Porsche 356A Cabriolet- 1956 to 1959
Porsche 356B-T5 Roadster - 1960 to 1962
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462830114
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Front Wiper Arm Rubber Flap
Sold each - 2 required per car
Complete your Porsche 356 restoration with this OE Match
Front Wiper Arm Rubber Flap, manufactured to replicate the original
factory specification. This small but essential rubber component fits around
the front windscreen wiper arm assembly, helping to seal the opening where the
wiper spindle passes through the bodywork.
Fits:
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Diagram ref no 33
Often overlooked during restoration, the rubber flap contributes to both the appearance and protection of the front scuttle area by helping to reduce the ingress of water, dirt and debris into the wiper mechanism and luggage compartment.
Manufactured from high-quality, weather-resistant rubber, this OE Match replacement provides the correct profile, flexibility and fit required for authentic Porsche 356 restoration projects.
What Does the Wiper Arm Rubber Flap Do?
The front wiper arm rubber flap performs several important functions within the windscreen wiper assembly.
Its primary roles include:
- Providing a protective seal around the windscreen wiper spindle.
- Helping prevent water entering the front luggage compartment and wiper mechanism.
- Reducing the ingress of dirt, dust and road debris.
- Protecting the bodywork around the wiper mounting point.
- Providing a neat, factory-correct finish around the wiper arm.
Although a small component, it plays an important role in preserving both the appearance and integrity of the front bodywork.
Why Does the Wiper Arm Rubber Flap Fail?
Rubber components naturally deteriorate over time due to constant exposure to the elements.
Common causes of failure include:
- UV exposure causing the rubber to harden and crack.
- Age-related perishing.
- Damage during wiper arm removal or replacement.
- Shrinkage reducing the sealing effectiveness.
- Continuous exposure to rain, heat and road contaminants.
- Loss of elasticity after many years of service.
As the rubber deteriorates, it can no longer provide an effective seal, allowing moisture and debris to reach areas that should remain protected.
When Should It Be Replaced?
Replacement is recommended when:
- The rubber has become cracked or split.
- The flap has hardened or lost its flexibility.
- Water is entering around the wiper spindle.
- The original flap is missing.
- Replacing or refurbishing the windscreen wiper system.
- Completing a concours or factory-correct Porsche 356 restoration.
Replacing worn rubber seals during restoration helps maintain the originality of the vehicle while protecting surrounding components from moisture damage.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462828112
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
This OE Match pickle fork style wiper blade is a replacement windscreen wiper blade for Porsche 356A models. It is designed to match the original-style fitment and period appearance, helping restore correct exterior detail and wiper function.
Sold each
Fits:
Porsche 356A 1956 - 1958
The wiper blade clears rain, moisture, and road spray from the windscreen, helping maintain driver visibility in wet conditions. The pickle fork style fitting is designed for the appropriate classic Porsche wiper arm application, supporting correct installation and original-style presentation.
Functions
• Replaces the windscreen wiper blade
• Pickle fork style fitting for classic Porsche application
• Clears rain and moisture from the windscreen
• Helps maintain visibility in wet driving conditions
• Restores correct period-style wiper appearance
• Replaces worn, split, hardened, streaking, or missing blades
• OE Match replacement for Porsche 356A exterior restoration.
Why Replace This Part?
Wiper blades wear out over time due to age, sunlight exposure, moisture, dirt, and repeated use. A worn blade can split, harden, chatter, streak, or fail to clear the windscreen properly. Replacing the blade helps restore clear visibility, safer wet-weather driving, and the correct classic Porsche exterior look.
When to Replace This Part
• The wiper blade leaves streaks or smears on the windscreen
• The rubber is split, hardened, cracked, or missing
• The blade chatters, skips, or does not sit correctly
• The existing blade has the wrong style or appearance
• The wiper arm or windscreen system is being restored
• Exterior detailing or period-correct restoration is being carried out
• The vehicle is undergoing Porsche 356A restoration.
Where it fits on the car
This wiper blade fits on the windscreen wiper arm on Porsche 356A models using the pickle fork style fitting. It forms part of the windscreen wiping system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64462831105
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
The OE MATCH Windscreen Wiper Blade is a replacement front wiper blade designed for the classic Porsche 356 Pre-A, manufactured between 1950 and 1955.
Fits:- Porsche 356 Pre-A 1950-55
Diagram Ref No 12
Produced as an OE-style replacement, this component is intended to restore the windscreen wiping function of the original Porsche 356 Pre-A wiper system while maintaining an appearance appropriate to the vehicle's period.
The Porsche 356 Pre-A is one of the most historically significant models in Porsche's development. Its distinctive bodywork, compact windscreen and traditional exterior fittings are important elements of its classic design.
The windscreen wiper assembly is a relatively small but essential part of this arrangement.
Although often overlooked during restoration, correctly functioning wiper blades are important for maintaining visibility in rain, road spray and other challenging driving conditions.
The OE MATCH wiper blade 113955425B-SL provides the wiping contact between the front windscreen and the wiper arm mechanism.
As the wiper arm moves across the glass, the blade's wiping edge removes water and surface moisture, helping maintain a clear view of the road.
For effective operation, the blade must remain in contact with the windscreen and move smoothly across the glass.
Over time, wiper blades deteriorate because of sunlight, temperature changes, exposure to moisture and repeated use.
The wiping edge can become hard, cracked, split or distorted, reducing its ability to clear water effectively.
Worn blades may leave streaks or smears, skip across the glass or produce squeaking and chattering noises.
A damaged blade can also place unnecessary stress on the wiper system and, in severe cases, allow exposed components to contact the windscreen.
Replacing a deteriorated blade with the OE MATCH 113955425B-SL helps restore reliable wiping performance and maintain the original-style appearance of the Porsche 356 Pre-A.
This replacement is particularly suitable for routine wiper maintenance, classic Porsche restoration projects and refurbishment of an original windscreen wiping system.
What This Product Does:
The wiper blade is responsible for clearing moisture and light contamination from the front windscreen.
Its main functions include:
- Removes Rainwater: Sweeps water away from the driver's field of vision.
- Clears Road Spray: Helps maintain visibility when driving on wet roads.
- Reduces Windscreen Smearing: Uses its wiping edge to move water and surface contamination away from the viewing area.
- Maintains Clear Visibility: Supports safer driving in poor weather.
- Provides Windscreen Contact: Works with the wiper arm to maintain contact with the glass.
- Supports Smooth Wiper Operation: Helps the wiping system move across the windscreen without unnecessary skipping or juddering.
- Preserves Classic Appearance: Maintains an original-style wiper arrangement appropriate to the Porsche 356 Pre-A.
- Replaces Deteriorated Components: Restores wiping performance when the original blade is worn.
- Supports Vehicle Maintenance: Provides an important replacement during routine servicing or restoration.
Symptoms Of Wear Or Failure:
Wiper blades naturally deteriorate with age and use.
On classic vehicles that may spend extended periods in storage, the rubber can also harden or distort even when the blades are used infrequently.
Typical symptoms:
- Water lines remaining after the blade passes.
- Narrow streaks across the driver's viewing area.
- Sections of the windscreen not being cleared.
- Repeated streaks in the same position.
- Reduced visibility during rainfall.
- Smears remaining after wiping.
- A thin water film across the windscreen.
- Cloudy or blurred visibility.
- Poor clearing of road spray.
- Repeated wiping required to obtain a clear view.
- Squeaking when the wipers operate.
- High-pitched noise across the glass.
- Increased noise during light rain.
- Squeaking after the vehicle has been stored.
Why Replacement Matters:
The windscreen wiper blade is an important safety-related maintenance component.
Its condition directly influences the driver's ability to see clearly during wet weather.
Replacing a worn blade helps restore effective water removal and maintain confidence when driving a classic Porsche.
- Restores Clear Visibility: Helps remove rainwater and road spray effectively.
- Reduces Streaking: Replaces a worn wiping edge that leaves water lines on the glass.
- Improves Wet-Weather Driving: Helps maintain a clearer field of vision.
- Reduces Smearing: Supports more consistent water removal.
- Helps Prevent Chattering: Replaces blade material that may be causing uneven movement.
- Reduces Unwanted Noise: Can eliminate squeaking caused by a deteriorated blade.
- Protects the Windscreen: Reduces the risk of damage caused by severely worn or exposed blade components.
- Maintains Classic Appearance: Supports an original-style Porsche 356 Pre-A wiper arrangement.
- Suitable for Restoration: Provides a replacement for worn, missing or unsuitable blades.
- OE MATCH Replacement: Offers an OE-style component for the specified classic Porsche application.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
113955425B-SL
The product you are viewing cross references to these numbers
-
Windscreen wiper system (Model: 356 SPEEDSTER) 356 1950-55 904-010
-
Windscreen washer system / Windscreen wiper system (Model: 356 A/540.1) 356A 1955-1959 904-015
-
Windscreen washer system / Windscreen wiper system (Model: ROADSTER) 356 B-T5 1960-65 904-000
-
Windscreen washer system / Windscreen wiper system 356 B-T6 / 356 C 1960-65 904-005
OEMatch Front Wiper Arms & Blades — Fit, Function, Confidence
OEMatch Front Wiper Arms & Blades are designed for Porsche models to restore effective windscreen clearing and help maintain driver visibility in a range of conditions. OEMatch Front Wiper Arms & Blades components are compatible replacements engineered to original-spec dimensions and tolerances — a practical option when genuine or OEM parts are unavailable.
Understanding OEMatch Front Wiper Arms & BladesOEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original front wiper arms & blades. OE (Original Equipment) refers to parts matching original specifications for the front wiper arms & blades and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM front wiper arms & blades engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models.
OEMatch supplies a broad selection of Porsche-fit items and maintains a catalog of thousands of entries. The range includes over 4,000 individual part numbers and more than 8,700 OE cross-references, with ongoing development of additional products intended to cover older and current Porsche models without compromising compatibility or serviceability.
Benefits Include- Restore clear, even wiping across the windscreen for improved visibility
- Arm finishes and bushings selected to resist corrosion and reduce binding
- Blade rubbers and profiles chosen to minimise streaking and wind lift
- Rubber deterioration from UV, ozone and road contaminants causes loss of contact
- Pivot wear, seized linkages or corrosion reduce arm movement and pressure
- Blade delamination or torn rubber from ice, debris or improper cleaning
Windscreen clearing is a safety-critical function; worn arms or blades reduce visibility and increase risk in poor weather. Many owners search for genuine or OEM Front Wiper Arms & Blades; these are direct-fit alternatives designed to match the original form, fit and function. Replacing worn parts promptly helps maintain sightlines and supports safe vehicle operation for Porsche models.
Advantages- Direct-fit replacements that match original mounting points for straightforward refit
- Available in common blade lengths and arm types to suit model-specific requirements
- Supplied with standard fittings and rubbers to work with factory wiper linkages and motors
-
Restoration Chassis / Repair Panels
-
Bonnets / Locks & Latches
-
Boots / Rear Lid / Locks and Latches
-
Bumpers Front
-
Bumpers Rear
-
Door Handles | Locks | Keys
-
Door Panels | Hinges | Striker Plates
-
Window Lifters | Motors
-
Wings Front & Parts
-
Wings Rear & Parts
-
Exterior Chassis Mouldings
-
Mirrors & Parts
-
Roof - Cabrio / Targa / Coupe / Speedster
-
Sound Proofing
-
Front screen
-
Rear screen
-
Front side glass
-
Rear side glass
-
Fastenings & Fixings
