do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Heater hoses & pipes
By OE Match
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Contains:
1 x Clamp for heater Left 90121105122
1 x Clamp for heater Right 90121105222
2 x M6 Hex. Head Bolts 90037803001
2 x Locking nuts N0120064
Fits:
Porsche 911 1965-1968 2.0L / 912 SWB (F)
Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC
Porsche 911 1984-1986 3.2L
Porsche 911 1975-1977 3.0L Turbo (930)
Porsche 911 1978-1989 3.3L Turbo (930)
Click 'Zoom in' for large parts diagram.
Diagram ref no 2 , 3 & 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
HEATERCLAMP911
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
The OE Match Clamp for Heater Hose, 330 mm is a high-quality replacement fastening component designed to securely retain heater hoses within the vehicle's cooling and heating system. Manufactured to OE specifications for fit, strength and durability, this clamp provides the clamping force required to maintain a reliable, leak-free connection between heater hoses and associated cooling system components.
Fits:
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Diagram Ref No 12
Constructed from corrosion-resistant materials and engineered to withstand constant exposure to heat, coolant, vibration and pressure fluctuations, this hose clamp helps ensure the integrity of the cooling and heating circuits. Proper hose retention is essential for maintaining coolant flow, heating performance and overall engine cooling system reliability.
What This Product Does:
- Secures heater hoses to pipes, fittings and cooling system components.
- Maintains a leak-free coolant system connection.
- Provides consistent clamping force under varying temperatures.
- Prevents hose movement caused by vibration and pressure changes.
- Supports efficient coolant circulation through the heating system.
- Helps maintain correct cabin heating performance.
- Contributes to overall cooling system reliability and safety.
Symptoms Of Wear Or Failure:
- Coolant leaks around heater hose connections.
- Visible corrosion or rust on the clamp.
- Loose or slipping heater hoses.
- Coolant residue around hose fittings.
- Reduced heater performance due to coolant loss.
- Sweet coolant odour from the engine bay.
- Low coolant level warnings.
- Overheating concerns caused by coolant leakage.
- Visible clamp deformation or loss of tension.
Why Replacement Matters:
- Heater hose clamps are exposed to continual heat cycles, moisture, coolant chemicals and engine vibration. Over time, corrosion, metal fatigue or loss of clamping tension can reduce their ability to maintain a secure seal between hoses and cooling system components.
- A failing hose clamp can allow coolant to escape, leading to reduced heater efficiency, cooling system pressure loss and potential engine overheating. Even minor coolant leaks can worsen over time, increasing the risk of damage to cooling system components and resulting in costly repairs.
- Replacing a worn or damaged heater hose clamp restores proper hose retention, prevents coolant leaks and helps maintain the efficiency and reliability of the cooling and heating systems. An OE Match replacement provides factory-style fitment, dependable clamping performance and long-term durability, ensuring reliable operation of your Porsche cooling system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99951234901
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-86
Porsche 911 Turbo 3.0L / 3.3L 1975-86
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90121105
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Rubber sealing ring / gasket used in the HVAC/heater/ventilation system of classic 911 / 912 cars. Its sealing points where heater/vent hoses pass through body or bulkhead. Ideal when refurbishing HVAC ducts, replacing heater hoses, restoring classic 911/912 ventilation and heat systems.
Sold each. 2 required per vehicle.
Fits:
Porsche 911 1965 - 1989 all models
Diagram ref no 18
Because over decades the original sealing rings often become brittle, hard, compressed or cracked (due to heat cycles, age, vibration, exposure to cabin air, moisture and dust), they lose their ability to seal properly.
This can lead to:
• Unwanted air leaks or drafts into cabin
• Water or dust ingress into the interior or into heater ducts
• Poor heating or ventilation performance
• Increased cabin noise, wind-noise or fumes entering cabin (especially on vehicles with engine-bay to cabin vents).
Replacing with a correct-spec sealing ring ensures a tight, flexible seal that restores proper HVAC function, occupant comfort, and helps preserve the integrity of the car’s interior and ventilation system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90157291301
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S2 4.7L 1984-86
Vacuum Hose Distribution Y-Piece – 4mm Vacuum Line
Splitter
Sold each - used in various locations
High-quality vacuum hose distribution Y-piece designed for a wide range of Porsche models including 911, 964, 924S, 944, 968, and 928.
This Y-splitter allows a single vacuum source to be divided into two outlets, enabling efficient routing and connection of vacuum lines within the engine bay or HVAC system. It is specifically designed for vacuum hoses with a 4mm outer diameter, ensuring a secure and precise fit.
Fits:
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S2 4.7L 1984-86
Diagram ref no 4
Manufactured to OEM standards, this connector is ideal for maintaining or restoring vacuum system integrity across multiple Porsche applications.
Key Features
• Universal-style vacuum Y-piece connector
• Suitable for Porsche 911, 964, 924S, 944, 968, and 928
• Designed for 4mm outer diameter vacuum hoses
• Enables splitting of vacuum lines
• OEM-style fit and function
• Durable construction for long-term reliability
Function and Purpose
This Y-piece is a critical connector within the vacuum system.
It helps to:
• Split a single vacuum line into two outputs
• Maintain proper vacuum routing
• Ensure consistent vacuum pressure distribution
• Support engine and HVAC system operation
Why Replace Your Vacuum Connector
Over time, vacuum connectors can degrade due to heat and age.
Common issues include:
• Cracked or brittle plastic
• Vacuum leaks
• Poor hose connections
• Engine or HVAC system malfunctions
Replacing the Y-piece restores proper vacuum system function.
• Loose or unsecured temperature sensor
• Incorrect temperature readings
• HVAC system inconsistencies
• Broken or missing connector clips
Replacing the lock piece restores proper sensor stability and function.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92857372702
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Heater Box Drain Hose
Maintain the efficiency and longevity of your classic
Porsche heating system with this OE Match Heater Box Drain Hose. Manufactured to closely match the original factory
specification, this ensures moisture and condensation are safely drained away from the heater box,
helping to protect surrounding components from corrosion and deterioration.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Diagram ref no 19
Ideal for routine maintenance or full restoration projects, this OE Match drain hose provides the correct fit and reliable performance expected from an original-style replacement.
What Does the Heater Box Drain Hose Do?
The heater box drain hose plays an important role in the operation of the air-cooled Porsche heating system.
Its functions include:
- Draining condensation and moisture from the heater box.
- Helping prevent water from collecting inside the heating system.
- Protecting the heater box and surrounding bodywork from corrosion.
- Reducing the risk of trapped moisture causing rust or deterioration.
- Maintaining efficient operation of the heating and ventilation system.
Although often overlooked, this simple hose helps preserve both the heating system and the surrounding chassis.
Why Does the Heater Box Drain Hose Fail?
The original drain hose is continually exposed to heat, moisture, road debris and age, causing the rubber material to deteriorate over time.
Common causes of failure include:
- Rubber becoming brittle and cracking with age.
- Splits caused by repeated heat cycles.
- Hardening due to engine bay temperatures.
- Blockages from dirt, leaves or road debris.
- Perishing caused by prolonged exposure to moisture and contaminants.
- Damage during engine or heater system maintenance.
A damaged or blocked drain hose can allow moisture to remain inside the heater box, increasing the risk of corrosion and reducing heating system efficiency.
When Should It Be Replaced?
Replacement is recommended when:
- The hose is cracked, split or hardened.
- Signs of water retention or corrosion are found around the heater box.
- The heating system is being restored or serviced.
- The engine is removed, providing easy access.
- Restoring a classic Porsche to factory specification.
- Carrying out preventative maintenance on an ageing vehicle.
Replacing the drain hose is an inexpensive way to help protect the heating system and surrounding bodywork from long-term moisture damage.
OE Match Features
- OE Match quality replacement.
- Manufactured to replicate original factory dimensions.
- Durable rubber construction.
- Correct fit and routing for factory heater box assemblies.
- Helps maintain proper heater box drainage.
- Suitable for restoration, repair and preventative maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90157132632
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
This is a high-quality replacement hot-air hose connecting the engine fan duct to the heat-exchanger in classic Porsche models. With an internal diameter of 60 mm and a length of 380 mm, this hose replicates the original specification, including the aluminium-lined construction and brown-paper exterior that Porsche used.
Fits:
Porsche 912
Porsche 911 1965-73
Engine to Heat Exchanger on the Left or Right
Fits:
Porsche 930 Turbo 1975-89
Porsche 911SC
Porsche 911 3.2L
Engine to Heat Exchanger on the right
Diagram ref no. 20
• Position on Vehicle: Engine bay, connecting the engine fan duct/air-intake housing to the heat-exchanger (or heater box) via the hose (typically on the right side).
• Cross-Reference / Alternative Numbers: 901 211 194 01 (current) supersedes and replaces 901 211 194 00.
• Material & Construction: Crafted from heat-resistant aluminium-lined hose, clad externally with the original brown-paper finish and sized to match the factory shape (60mm inner diameter, ~380mm length). Built for high-temperature engine-bay environment and correct airflow performance.
• Applications: Ideal when the original hose is cracked, delaminated, deformed, missing, or when restoring correct heating/airflow behaviour in the engine bay or passenger compartment on classic air-cooled Porsche cars.
This hot-air hose plays a vital role in engine and cabin heat management: if it's cracked, collapsed, or detached, you may experience reduced heater output, engine-bay overheating, erratic air-flow, or loss of original ducting performance. Installing a correctly specified replacement restores the original system’s performance and helps maintain correct engine and cabin temperature control.
When and why to replace:
• Visible cracking, splitting, or sagging in the old hose.
• Hose has been removed, reused too often or replaced with incorrect diameter/length.
• Heater output is weak or airflow to engine/compartment is abnormal.
• Restoring a classic 911/930 and you require original spec parts for authenticity and functionality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90121119401
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
The OE MATCH Gasket for Heater Flap is a high-quality replacement sealing gasket designed for the heater flap assembly within the vehicle's heating and ventilation system. This gasket creates an effective seal between the heater flap and its housing, ensuring that warm air is directed correctly through the heating ducts and into the cabin.
Sold Each.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Diagram Ref No 7
Manufactured to OE specifications, the gasket helps prevent unwanted air leakage, improves heater efficiency, and contributes to proper climate control performance. Made from durable materials resistant to heat, age, and environmental exposure, it is an essential component during heater flap refurbishment or restoration work, particularly on classic Porsche models.
What This Product Does:
- Provides a seal between the heater flap and housing assembly
- Prevents unwanted air leakage within the heating system
- Ensures efficient airflow through the heater ducts
- Helps maintain consistent cabin heating performance
- Supports proper operation of the vehicle's ventilation system
- Reduces heat loss within the heater control system
Symptoms Of Wear Or Failure:
- Reduced cabin heating performance
- Air leaks from the heater flap assembly
- Difficulty maintaining cabin temperature
- Poor airflow direction through heater vents
- Increased drafts entering the cabin
- Rattling or vibration from loose sealing materials
- Visible deterioration, cracking, or missing gasket material
- Reduced efficiency of the heating and ventilation system
Why Replacement Matters:
- Restores an effective air-tight seal within the heater system
- Improves heating efficiency and airflow control
- Reduces unwanted air leaks and heat loss
- Enhances overall cabin comfort
- Supports proper operation of the heater flap mechanism
- Helps maintain original HVAC system performance
- Prevents drafts and inconsistent heating
- Provides a professional finish during restoration or maintenance work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91121129700
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
The OE MATCH Heater Flap Hose is a high-quality silicone heating system hose designed to connect the heat control box (heater flap assembly) to the heat exchanger. Measuring Ø60 x 330 mm, this flexible hose forms a vital part of the vehicle’s cabin heating system, carrying heated air from the heat exchangers to the heater control components and ultimately into the passenger compartment.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Manufactured from durable, heat-resistant silicone, the hose is designed to withstand the high temperatures generated by the exhaust-heated air system while maintaining flexibility and structural integrity. It is an ideal replacement for ageing, cracked, or deteriorated original hoses commonly found on classic Porsche models.
What This Product Does:
- Transfers heated air from the heat exchanger to the heater control box
- Supports efficient cabin heating system operation
- Provides a sealed airflow path within the heating system
- Helps maintain consistent cabin temperatures
- Reduces heat loss within the heater ducting system
- Withstands high temperatures and engine bay conditions
Symptoms Of Wear Or Failure:
- Weak or reduced cabin heating output
- Loss of heated air before it reaches the cabin
- Cracked, split, or collapsed hose sections
- Air leaks around the heater duct connections
- Uneven or inconsistent cabin temperatures
- Visible deterioration from age, heat, or oil contamination
- Increased noise from escaping airflow
- Reduced overall efficiency of the heating system
Why Replacement Matters:
- Restores efficient heated air delivery to the cabin
- Prevents heat loss through damaged or leaking ducting
- Improves cabin comfort and temperature control
- Maintains proper operation of the heater flap system
- Reduces unwanted air leaks and noise
- Provides improved durability compared to ageing original hoses
- Supports restoration and maintenance of classic
- Porsche heating systems
- Ensures reliable long-term performance in high-temperature environments
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93021162201
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
This heating tube inside sill is a high-quality replacement air-duct tube designed to channel warm air from the exhaust-heated heating system through the sill area of classic Porsche 911 models built from 1969 through 1989 and 356 B/C models. It matches the original part’s fit and performance to maintain proper heating airflow in your vehicle’s cabin.
Fits:
Porsche 356 B/C 1.6 01/1959 - 12/1965
Porsche 911 2.0-3.3 08/1968 - 07/1989
Porsche 912 1.6 01/1965 - 02/1970
Porsche 914 1.7-2.0 01/1969 - 07/1974
Diagram ref no 15
The heating tube directs hot air generated by the engine’s exhaust-heated heat exchangers into the cabin area via the sill ducting. This ensures your classic Porsche’s heater system distributes warmth effectively, improving defogging, defrosting, and passenger comfort in cooler weather.
Function: Installed along the inner sill section, this tube captures heat from the heater system and delivers it through the duct network into the footwell or cabin air distribution points. A properly functioning heater tube helps maintain consistent cabin temperature and prevents heat loss due to damage or age-related degradation of the original ducting.
Over decades of use, original heater tubes can become cracked, brittle, or collapsed, leading to poor airflow, heat loss, or even exhaust gas intrusion into the cabin air system. Replacing the deteriorated tube with an OE Match unit restores effective hot-air distribution, improves cabin comfort and heater efficiency, and keeps the vintage heating system functioning as intended.
Replace this heating tube when you notice:
• Weak or inconsistent warm air delivery from the heater
• Deteriorated, cracked, or collapsed heater tubing
• Excessive heat loss before reaching the cabin
• Unusual smells from heater ducts (possible leaks)
• During full heater system or sill restoration work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91157202502
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
Fits:
Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC
Porsche 911 1984-1986 3.2L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99951214502
The product you are viewing cross references to these numbers
.jpg?width=197 "Rubber sleeve heat exchanger. Porsche 911 3.2 Carrera - 93021133904, 93021133901")
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Sold each - 2 required per car.
Fits:
Porsche 911 3.2 Carrera - 1984 to 1989
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93021133904
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
Fits:
Porsche 911 3.2 Carrera - 1984 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 996 - 1997 to 2005
Porsche 997 - 2005 to 2012
Porsche 991.1 - 2012 to 2016
Porsche 986 Boxster - 1997 to 2004
Porsche 987 Boxster / Cayman - 2005 to 2012
Diagram ref no 2 and 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1129487
The product you are viewing cross references to these numbers
-
L-JETRONIC II 911 CARRERA 930.20/21/26 1984-86 107-05
-
Air injection 911 CARRERA 930.26 (AUS) (CH) (S) 1984-86 108-00
-
Exhaust system 911 CARRERA 1984-86 202-05
-
heating air supply 911 1984-86 202-20
-
ventilation heating system - 1 - 911 1984-86 813-00
-
ventilation heating system - 2 - 911 1984-86 813-01
-
additional blower 911 1984-86 813-02
-
frame centre 911 1984-86 801-10
-
cooling air duct left-hand drive 911 1984-86 813-10
OEMatch Heater hoses & pipes — Durability, Sealing, Performance
OEMatch supplies many parts for Porsche heating and cooling systems, including heater hoses and coolant pipes selected for material suitability and model coverage for Porsche vehicles.
Understanding OEMatch Heater hoses & pipes
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original heater hoses & pipes.
OE (Original Equipment) refers to parts matching original specifications for the heater hoses & pipes and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM heater hoses & pipes engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models.
Heater hoses and pipes carry hot coolant from the engine to the heater core and return cooled fluid to the cooling circuit. They maintain coolant flow, support cabin heating, and help prevent air ingress and leaks that can affect engine temperature control.
Benefits Include
- Restores coolant circulation to support cabin heating and engine temperature control
- Reduces the risk of coolant leaks that can lead to overheating
- Materials selected for heat and pressure resistance suitable to Porsche applications
- Replacements that align with original mounting points and connection types
Why Heater hoses & pipes Wear and Fail
- Age-related rubber degradation causing cracking, swelling or hardening
- Corrosion or pinhole defects in metal pipes
- Coolant contamination or chemical breakdown leading to internal deterioration
- Loose, damaged or corroded clamps and fittings allowing leaks
The Importance of Replacing with OEMatch Heater hoses & pipes
Replacing worn heater hoses and pipes restores reliable coolant flow and cabin heating while lowering the chance of coolant loss and engine overheating. Regular inspection and timely replacement helps maintain system pressure integrity and avoids secondary damage to the heater core, water pump or head gasket. Choose components that match your Porsche model and the correct connection types to ensure straightforward installation and ongoing system reliability.
Advantages
- Selected materials for resistance to heat, pressure and corrosion
- Designed to match original dimensions and hose routing where applicable
- Suitable for maintenance, restoration and preventative servicing
Support & Advice
These items can appear straightforward to fit but may require specific procedures such as correct routing, adjustment and securing of hose / pipe ends. If you lack the correct tools or are unsure about hidden fastenings or sensors, seek professional installation.
.jpg){kind=link}
