do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Exhaust Gaskets
By OE Match
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Exhaust Gasket Kit
Restore proper exhaust sealing and eliminate unwanted
exhaust leaks with this comprehensive Exhaust Gasket Kit for Porsche 911 3.2 Carrera models
produced between 1984 and 1989. Designed for air-cooled Porsche engines, this
complete kit contains all the key gaskets required when servicing, rebuilding
or replacing exhaust system components.
Fits:
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
These gaskets create critical gas-tight seals between exhaust components, preventing exhaust gases from escaping before reaching the silencer system. Proper sealing helps maintain engine efficiency, exhaust performance and correct operation of the entire exhaust system.
The kit includes:
- 6 x Heat Exchanger to Cylinder Head Gaskets
- 2 x Heat Exchanger Cross Pipe / Pre-Silencer Gaskets
- 2 x Pre-Silencer to Rear Silencer Gaskets
Whether carrying out an exhaust repair, heat exchanger replacement or full restoration project, replacing old exhaust gaskets is essential to ensure long-term reliability and optimum performance.
What Does an Exhaust Gasket Kit Do?
Exhaust gaskets are designed to seal the connections between exhaust system components, preventing exhaust gases from escaping under pressure.
A properly functioning gasket system helps provide:
- Leak-free exhaust operation Correct exhaust gas flow
- Reduced exhaust noise
- Improved engine efficiency
- Proper back pressure characteristics
- Reduced risk of exhaust fumes entering the cabin
- Reliable long-term exhaust performance
Because exhaust systems operate under extreme heat and pressure, gasket condition is critical to maintaining proper sealing.
Symptoms of Exhaust Gasket Wear or Failure
Exhaust gaskets are constantly exposed to thermal cycling, vibration and corrosive exhaust gases. Over time they can deteriorate, compress, crack or fail.
Common symptoms include:
- Exhaust blowing noises
- Ticking or tapping sounds on start-up
- Increased exhaust noise
- Exhaust fumes around the engine bay
- Reduced engine performance
- Soot deposits around exhaust joints
- Exhaust smell entering the cabin
- Visible gasket deterioration during inspection
- Poor sealing after exhaust system removal
In many cases, exhaust leaks become progressively worse if damaged gaskets are not replaced.
Why Replacement Matters
Replacing exhaust gaskets whenever exhaust components are removed is considered best practice maintenance.
Benefits include:
- Restores leak-free exhaust operation
- Eliminates exhaust gas leaks
- Improves engine efficiency
- Reduces unwanted exhaust noise
- Protects surrounding engine components
- Helps maintain correct exhaust flow characteristics
- Supports safe vehicle operation
- Improves reliability of exhaust repairs
For classic air-cooled Porsche 911 models, maintaining a properly sealed exhaust system is essential for both performance and driving enjoyment.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
GASKETKIT02
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
This Exhaust Heat Exchanger Mounting Kit is a comprehensive OE MATCH quality hardware kit designed to securely install and mount the exhaust heat exchangers on classic Porsche models.
Kit Contents:
x6 Exhaust Gasket Heat Exchanger Manifold (93011119112/1)
x6 Exhaust Hex Nut For Heat Exchanger (99908500103/1)
x6 Exhaust Bolt (90007428203/1)
x6 Exhaust Nut (90091009701/1)
x2 Exhaust Gasket Heat Exchangers To Crossover Or Pre-Silencer (93011119206/1)
x1 Exhaust Gasket Crossover Pipe To Pre-Silencer (93011119308/1)
x6 Exhaust Nut (9000760250C)
Fits:
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
What This Product Does:
- Secures heat exchangers to the engine and exhaust system
- Maintains proper alignment of exhaust components
- Ensures a gas-tight and stable installation
- Withstands high temperatures and vibration
- Supports efficient heat transfer for cabin heating systems
Symptoms Of Wear Or Failure:
- Exhaust leaks around the heat exchanger connections
- Rattling or loose exhaust components
- Broken or corroded studs and nuts
- Difficulty maintaining proper exhaust alignment
- Reduced heating efficiency inside the cabin
- Visible rust or seized fasteners
Why Replacement Matters:
- Ensures secure and stable installation of heat exchangers
- Prevents exhaust leaks and loss of efficiency
- Maintains correct exhaust alignment and system integrity
- Reduces risk of component damage due to movement or stress
- Simplifies installation during restoration or repair projects
- Improves long-term reliability, especially on classic vehicles
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHFITTING.911.4
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 911 - 1975 to 1989
For 2.7ltr / 3.0ltr / 3.2ltr engine
This kit consists of a flange gasket, three stainless steel screws and three nuts for sealing the exhaust silencer flange.
The seal is suitable for the Porsche 911 G models from 1975 to 1989 to connect the pre-silencer to the rear silencer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
911111191KIT
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
The OE MATCH Exhaust Gasket, Cross Over Pipe to Pre-Silencer is a high-quality replacement sealing gasket designed to provide a secure, gas-tight connection between the exhaust crossover pipe and pre-silencer assembly. Engineered to OE specifications, this gasket prevents exhaust gas leaks while maintaining correct exhaust flow, backpressure characteristics, and overall exhaust system efficiency.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Manufactured from durable, heat-resistant materials, the gasket is designed to withstand the extreme temperatures, pressure fluctuations, and vibration present within the exhaust system. It is an essential replacement component whenever the crossover pipe or pre-silencer is removed, serviced, or replaced.
What This Product Does:
- Creates a gas-tight seal between the crossover pipe and pre-silencer
- Prevents exhaust gas leaks at exhaust system joints
- Maintains correct exhaust flow and backpressure
- Supports engine performance and exhaust efficiency
- Reduces exhaust noise caused by leaking connections
- Withstands high exhaust temperatures and thermal cycling
Symptoms Of Wear Or Failure:
- Exhaust blowing, hissing, or ticking noises
- Visible exhaust gas leaks around flange connections
- Soot or carbon deposits near the gasket area
- Exhaust fumes or odours around the vehicle
- Increased exhaust noise levels
- Reduced exhaust system efficiency
- Difficulty maintaining a proper seal after exhaust repairs
- Potential emissions compliance issues caused by exhaust leaks
Why Replacement Matters:
- Restores a reliable gas-tight exhaust seal
- Prevents exhaust leaks and excessive noise
- Maintains proper exhaust flow characteristics
- Supports engine efficiency and performance
- Reduces the risk of exhaust fumes escaping from the system
- Protects surrounding components from hot exhaust gases
- Helps maintain emissions system effectiveness
- Ensures long-term durability and reliability of the exhaust system
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93011119308
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
The OE MATCH Exhaust Gasket Heat Exchanger Manifold is a high-quality replacement sealing gasket designed to create a secure, gas-tight connection between the exhaust manifold and heat exchanger assembly. Engineered to OE specifications, this gasket prevents exhaust gas leaks while maintaining correct exhaust flow, engine efficiency, and exhaust system performance.
Sold Each.
Fits:
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Diagram Ref No 2
Manufactured from durable, heat-resistant materials, the gasket is designed to withstand extreme exhaust temperatures, pressure fluctuations, and constant thermal cycling. It is an essential component whenever exhaust manifolds, heat exchangers, or related exhaust system components are removed, serviced, or replaced.
What This Product Does:
- Provides a gas-tight seal between the exhaust manifold and heat exchanger
- Prevents exhaust gas leaks at critical exhaust system connections
- Maintains proper exhaust flow and backpressure characteristics
- Supports engine performance and combustion efficiency
- Reduces unwanted exhaust noise caused by leaking joints
- Withstands high temperatures and exhaust system vibration
Symptoms Of Wear Or Failure:
- Ticking, blowing, or hissing noises from the exhaust system
- Visible exhaust leaks around manifold or heat exchanger connections
- Soot or carbon deposits near exhaust flanges
- Exhaust fumes or smells in the engine bay or cabin
- Reduced engine efficiency or performance
- Increased exhaust noise levels
- Potential emissions test failures
- Difficulty achieving a proper seal after exhaust system repairs
Why Replacement Matters:
- Restores a reliable gas-tight exhaust seal
- Prevents exhaust leaks and excessive exhaust noise
- Maintains correct exhaust flow and system efficiency
- Supports optimal engine performance and fuel efficiency
- Reduces the risk of exhaust fumes escaping into surrounding areas
- Protects nearby components from exposure to hot exhaust gases
- Helps maintain emissions compliance
- Ensures long-term reliability and durability of the exhaust system
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93011119112
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
The OE MATCH Exhaust Gasket – Heat Exchangers to Crossover or Pre-Silencer is a high-quality replacement sealing gasket designed to create a gas-tight connection between the exhaust heat exchangers and the crossover pipe or pre-silencer assembly. Engineered to OE specifications, this gasket helps prevent exhaust gas leaks while maintaining proper exhaust flow, system efficiency, and engine performance.
Sold Each.
Fits:
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Diagram Ref No 6
Operating in an extremely high-temperature environment, the gasket is manufactured from durable heat-resistant materials capable of withstanding continuous thermal cycling and exhaust system pressures. It is an essential component whenever exhaust system sections are removed, repaired, or replaced.
What This Product Does:
- Creates a gas-tight seal between exhaust components
- Prevents exhaust gas leaks at the heat exchanger connection
- Maintains proper exhaust flow and backpressure
- Supports engine performance and efficiency
- Reduces exhaust noise caused by leaking joints
- Withstands high exhaust temperatures and thermal cycling
Symptoms Of Wear Or Failure:
- Exhaust blowing or ticking noises from the engine area
- Visible exhaust gas leaks around gasket joints
- Exhaust fumes or smells entering the cabin
- Reduced engine efficiency or performance
- Soot or carbon deposits around the exhaust flange
- Increased exhaust noise levels
- Failed emissions inspections in severe cases
- Difficulty maintaining a proper exhaust system seal after repairs
Why Replacement Matters:
- Restores a proper gas-tight exhaust seal
- Prevents exhaust leaks and unwanted noise
- Maintains correct exhaust flow characteristics
- Helps preserve engine performance and efficiency
- Reduces the risk of exhaust fumes entering the cabin
- Protects surrounding components from hot exhaust gases
- Supports emissions system performance and compliance
- Ensures reliable long-term operation of the exhaust system
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93011119206
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
The OE MATCH Exhaust Rear Silencer Gasket is a high-quality replacement sealing gasket designed to provide a secure, gas-tight connection between the rear silencer (muffler) and adjoining exhaust system components. Engineered to OE specifications, this gasket helps prevent exhaust leaks, maintain correct exhaust flow, and ensure efficient operation of the exhaust system.
Fits:
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Manufactured from durable, heat-resistant materials, the gasket is designed to withstand extreme exhaust temperatures, pressure fluctuations, and continuous thermal cycling. It is an essential replacement component whenever the rear silencer is removed, replaced, or serviced, helping to restore the integrity of the exhaust system.
What This Product Does:
- Creates a gas-tight seal between the rear silencer and exhaust system components
- Prevents exhaust gas leaks at connection points
- Maintains proper exhaust flow and system efficiency
- Helps reduce unwanted exhaust noise
- Supports optimal engine performance and emissions control
- Withstands high exhaust temperatures and vibration
Symptoms Of Wear Or Failure:
- Exhaust blowing, ticking, or hissing noises
- Visible exhaust gas leaks around exhaust joints
- Soot or carbon deposits near the gasket area
- Increased exhaust noise levels
- Exhaust fumes or odours around the vehicle
- Reduced exhaust system efficiency
- Failed emissions inspections in severe cases
- Difficulty achieving a proper seal after exhaust repairs
Why Replacement Matters:
- Restores a proper gas-tight exhaust seal
- Prevents exhaust leaks and excessive noise
- Maintains correct exhaust flow characteristics
- Supports engine efficiency and performance
- Reduces the risk of exhaust fumes escaping from the system
- Protects surrounding components from hot exhaust gases
- Helps maintain emissions compliance
- Ensures long-term durability and reliability of the exhaust system
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91111119102
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 2.7L / 3.0L / *3.2L 08/73-07/85
*If used with 1984 onwards 3.2L you may need 6x 93011119112/1 42mm bore Manifold gaskets
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG91121100
The product you are viewing cross references to these numbers
-
Throttle linkage bracket 911 1984-86 107-12
-
Additional blower 911 CARRERA 930.20/21/26 1984-86 108-10
-
exhaust system 911 CARERRA 1984-86 202-00
-
Exhaust system 911 CARRERA 1984-86 202-05
-
pedals accelerator control 911 1984-86 702-10
-
Compressor mounting and driving mechanism 911 1984-86 813-20
-
control unit, relay, fuse box 911 1984-86 902-00
-
battery, starter, generator 911 1984-86 902-05
OEMatch Exhaust Gaskets — Flow, Response, Refinement
Exhaust gaskets form essential seals within Porsche exhaust systems. OEMatch supplies a selection of exhaust gaskets for Porsche models to restore sealing between manifolds, headers, pipes and catalytic converters. Choosing the correct profile and material helps prevent leaks, reduce noise and protect nearby components from heat damage.
Available Types
- Manifold-to-downpipe flange gaskets
- Header and collector gaskets
- Catalytic converter and connector gaskets
- Ring and multi-layer steel (MLS) exhaust seals
Understanding OEMatch Exhaust Gaskets
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original exhaust gaskets.
OE (Original Equipment) refers to parts matching original specifications for the exhaust gaskets and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM exhaust gaskets engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models.
Exhaust gaskets create airtight seals at joints and flanges to control gas flow and maintain correct back pressure. Materials range from composite fibres and graphite to metal-reinforced and multi-layer steel constructions chosen for temperature resistance and corrosion durability. Correct sealing supports sensor operation, emissions control and engine efficiency while limiting exhaust noise and vibration.
Benefits Include
- Tight sealing to prevent exhaust leaks and maintain back pressure
- Reduced exhaust noise and vibration
- Protection of nearby components from heat and corrosive gases
Why Exhaust Gaskets Wear and Fail
- Repeated thermal expansion and contraction leading to cracking or deformation
- Corrosion from moisture and road salt attacking metal layers
- Vibration and joint movement causing material fatigue or loss of compression
- Incorrect installation or uneven flange contact causing leaks
The Importance of Replacing with OEMatch Exhaust Gaskets
Replacing worn or damaged gaskets restores proper exhaust sealing for Porsche models and helps retain engine performance, emissions control and component life. Many owners search for genuine or OEM exhaust gaskets; these are direct-fit alternatives designed to match the original form, fit and function. Selecting the correct gasket type for the exhaust joint reduces the risk of recurring leaks and downstream damage to manifolds, sensors and catalytic converters.
Advantages
- A choice of materials and profiles matched to common Porsche flange types
- Options suited to restoration, routine maintenance or higher-temperature applications
- Clear identification by application to help confirm fit for model and engine
