do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Door Panel
By OE Match
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
This OE Match interior door handle kit contains two handles for classic Porsche 911 and 912 models. It supports replacement of damaged or worn cabin fittings during repairs or interior refurbishment.
Fits
- Porsche 911 1965 to 1973
- Porsche 912 1966 to 1973
Check fitment for your specific vehicle (model, year, engine) before ordering.
Diagram reference: 9.
What This Product Does
The kit provides replacement interior handles rather than complete door panels. It is intended for work on the existing door fittings, allowing worn handles to be renewed without replacing unrelated trim.
Functions
- Replaces damaged interior door handles.
- Renews regularly used cabin touch points.
- Supports repairs to existing door trim assemblies.
Technical Details
- Contents: two interior door handles.
- Left handle reference: 90153107300; diagram marking /L.
- Right handle reference: 90153107400; diagram marking /R.
Symptoms of Fault
Broken handles, worn contact surfaces or looseness around the mounting points warrant inspection. Check adjacent clips, brackets and door-panel fixings to establish whether the handle itself or a supporting component needs attention.
Why Replacement Matters
Renewing damaged handles addresses worn interior fittings during a repair or restoration. Inspect the surrounding mounts before installation, as replacing a handle alone will not correct damage elsewhere in the door assembly.
FAQs
How many handles are supplied?
The kit contains two interior handles, with Left and Right references identified in the supplied diagrams.
Are fitting clips and fasteners included?
The supplied contents confirm the handles only; additional installation hardware is not specified.
What should be checked before fitting?
Compare the existing handles, vehicle details and part references. Examine the mounting points and replace damaged supporting fixings where necessary.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90153107300
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 1967-83
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91154247103
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 1965-77
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91154247102
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
The OE MATCH Concave / Contact Switch Washer is a precision-moulded replacement component designed to provide secure positioning and support for the door contact switch on classic Porsche models.
Fits:- Porsche 911 1965 - 1989
- Porsche 912 1965 - 1969
- Porsche 964 1989 - 1994
- Porsche 993 1995 - 1998
Diagram Ref No 30
Manufactured to match the dimensions and specifications of the original Porsche component, this concave washer fits beneath the door contact switch, helping maintain correct seating and alignment at the mounting point.
The door contact switch forms part of the vehicle's interior lighting circuit, detecting when the door is opened or closed. By supporting the correct installation and positioning of the switch, this washer contributes to reliable switch operation and helps prevent unwanted movement or misalignment.
Ideal for replacing worn, cracked, damaged or missing original washers, this OE MATCH component is a practical solution for routine maintenance, electrical repairs and classic Porsche restoration projects.
What This Product Does:
Although a small component, the concave contact switch washer performs several important functions:
- Supports the Door Contact Switch: Provides a correctly shaped seating surface beneath the switch at its mounting location.
- Maintains Switch Alignment: Helps keep the door contact switch correctly positioned for consistent operation when the door opens and closes.
- Improves Mounting Stability: Helps prevent unwanted movement or looseness around the switch mounting point.
- Supports Interior Lighting Operation: Helps maintain the correct positioning of the switch responsible for activating the interior light when the door opens.
- Protects Surrounding Components: Provides a suitable interface between the switch body and its mounting surface, helping reduce localised wear or damage.
- Maintains Original-Style Fitment: Replaces the original washer while preserving the correct appearance and assembly of the door contact switch.
Over time, the original contact switch washer can deteriorate due to age, repeated door operation, vibration and environmental exposure. Common signs of wear or damage include:
- Cracked or Broken Washer: Visible fractures or deterioration around the washer.
- Loose Door Contact Switch: The switch may move or sit incorrectly within its mounting location.
- Intermittent Interior Lighting: The interior light may fail to activate consistently when opening the door if the damaged washer affects switch positioning.
- Interior Light Remaining On: Incorrect switch seating or alignment may contribute to the switch failing to register a closed door.
- Switch Misalignment: The door contact switch may appear tilted, recessed or incorrectly positioned.
- Missing or Deteriorated Washer: The original component may be absent, distorted or damaged during previous maintenance.
- Unstable Switch Operation: Movement at the mounting point may contribute to inconsistent switch activation.
Important: Interior lighting faults may also result from a defective contact switch, damaged wiring or poor electrical connections. The washer should be inspected as part of the overall switch assembly.
Why Replacement Matters:
Replacing a worn or damaged concave door contact switch washer helps maintain the correct installation, stability and operation of the door contact switch.
Key Benefits of Replacement:
- Restores correct seating and positioning of the door contact switch.
- Helps maintain consistent interior light switch operation.
- Reduces unwanted movement or looseness at the mounting point.
- Replaces cracked, deteriorated or missing original washers.
- Helps protect the switch mounting area from unnecessary wear.
- Provides original equipment-style fitment and dimensions.
- Supports reliable maintenance of the vehicle's interior lighting system.
- Ideal for classic Porsche restoration and preventative maintenance.
A damaged or missing washer may appear insignificant, but incorrect door contact switch positioning can contribute to electrical operation issues. Replacing the washer is a simple and cost-effective way to help maintain the functionality and originality of the vehicle's door switch assembly.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90161561520
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Please note this is only part of the handle (No 15 on diagram). It requires to be changed over with existing trigger.
* You can make them Chrome or get them plated if you have chromes handles as may buyers have done this.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3607709111
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
The OE Match Door Handle Triggers, Silver are premium-quality replacement exterior door handle components designed to restore the original appearance and smooth operation of compatible Porsche door handles. Manufactured to OE specifications for fit, finish and durability, these silver-finished triggers provide reliable door release operation while maintaining the authentic factory styling of the vehicle.
Please Note: This is only part of the handle (No 15 on diagram). It requires to be changed over with existing trigger.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Manufactured from high-quality die-cast metal with a durable silver finish, the door handle triggers are engineered to withstand frequent use, exposure to the elements and daily wear. Precision-machined pivot points and mounting surfaces ensure smooth operation and direct OE-style installation, making them the ideal replacement for worn, damaged or corroded original door handle triggers during restoration or repair.
What This Product Does:
- Operates the exterior door latch mechanism.
- Allows smooth opening of the vehicle door.
- Restores the original appearance of the exterior door handles.
- Provides a comfortable and secure grip when opening the door.
- Maintains correct operation of the door latch system.
- Replaces worn, damaged or corroded door handle triggers.
- Provides factory-style fitment and finish.
- Forms an essential part of the exterior door handle assembly.
Symptoms Of Wear Or Failure:
- Difficulty opening the door from outside.
- Loose or excessive movement in the trigger.
- Sticky or stiff trigger operation.
- Worn, scratched or faded silver finish.
- Cracked or broken trigger.
- Corrosion or pitting of the metal surface.
- Trigger failing to return to its resting position.
- Inconsistent operation of the door latch.
- Visible cosmetic deterioration.
- Reduced originality during restoration.
Why Replacement Matters:
- Door handle triggers are one of the most frequently used exterior components on any vehicle and are continually exposed to weather, UV radiation, moisture and repeated daily operation. Over time, wear to the pivot mechanism, corrosion or damage to the finish can reduce both their appearance and functionality.
- A worn or damaged trigger can make it difficult to open the door, place additional strain on the latch mechanism and detract from the appearance of an otherwise well-maintained or restored Porsche. Failure of the trigger mechanism may eventually prevent the door from opening correctly from the outside.
- Replacing worn or damaged door handle triggers restores smooth, reliable door operation while maintaining the original factory appearance. The OE Match Silver Door Handle Triggers provide factory-style fitment, premium-quality construction and long-lasting durability, making them the ideal solution for Porsche restoration, repair and preventative maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3607709112
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1975-1977 3.0L Turbo (930)
Fits:
Porsche 911/912 1965-76
Porsche 930 Turbo 1975-77
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90153167121
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
OE Match door panel cup for classic Porsche 911, 912, and 914 models. This replacement interior trim component is used within the door panel assembly, helping provide correct location and support for the associated door trim fixing.
Fits:
Porsche 911 2.0-3.3 01/63-07/85
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76
Diagram ref no 2
What this part does
The door panel cup provides a locating and seating point within the door trim assembly. A correctly fitted cup helps maintain secure door panel installation and supports a neat, factory-style interior finish.
Functions:
• Replaces the door panel cup
• Provides a locating point within the door trim assembly
• Helps support correct door panel fitment
• Helps reduce loose or poorly fitted interior trim
• Suitable for door card removal, refitting, or restoration
• Ideal for replacing missing, worn, or damaged original fittings
• OE Match replacement for classic Porsche interior trim repair
Replace This Part?
Small door trim fittings can become brittle, cracked, worn, damaged, or lost during door panel removal and interior repairs. Missing or damaged components can lead to poor trim fitment, movement, or rattles. Replacing the door panel cup helps restore correct installation and a cleaner interior finish.
When to Replace This Part
• Door panel cup is missing or damaged
• Door card has been removed for servicing
• Interior trim is loose or poorly located
• Door panel restoration is being carried out
• Original trim hardware has become brittle or worn
• Vehicle is undergoing classic Porsche interior refurbishment.
Where it fits on the car
This part fits within the interior door panel / door card assembly on applicable Porsche models.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959131140
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Door Pocket Plastic Hinge
Sold each - required per dood
Restore the functionality and appearance of your classic
Porsche door pockets with this OE Match Door Pocket Plastic Hinge. This precision-manufactured replacement
hinge provides smooth operation and secure support for the door pocket lid,
helping to maintain the original practicality and presentation of your
interior.
Fits:
- Porsche 911 1969-1973 2.2L / 2.4L / 2.7L RS LWB (F)
The plastic hinge is one of the most commonly worn components within the classic Porsche door pocket assembly. Decades of regular use, exposure to heat and UV light, and the natural ageing of plastic often cause the original hinges to become brittle, crack or break completely. Damaged hinges can result in sagging door pockets, loose lids or complete failure of the pocket assembly.
Manufactured to OE Match standards, this replacement hinge offers accurate fitment and dependable durability, making it the ideal choice for interior restorations, refurbishment projects and routine maintenance.
Please Note: Four hinges are required per door for a complete installation.
What Does the Door Pocket Plastic Hinge Do?
The plastic hinge forms the pivot point for the door pocket lid, allowing it to open and close smoothly while securely supporting the pocket assembly.
Its primary functions include:
- Supporting the door pocket lid.
- Providing smooth opening and closing action.
- Maintaining correct alignment of the pocket.
- Preventing excessive movement or sagging.
- Preserving the original appearance and functionality of the door panel.
Although small, these hinges are essential to the proper operation of the door storage compartment.
Why Replace the Door Pocket Hinges?
Plastic interior components naturally deteriorate over time.
Common signs of failure include:
- Cracked or broken hinges. Brittle plastic caused by age.
- Door pocket lid no longer opening correctly.
- Sagging or loose pocket assembly.
- Missing hinge components.
- Damage during door card restoration.
- Wear from repeated use over many years.
Replacing all the hinges during refurbishment ensures smooth operation and restores the integrity of the complete door pocket assembly.
Features
- OE Match replacement door pocket plastic hinge.
- Manufactured for accurate fitment.
- Durable high-quality plastic construction.
- Restores smooth door pocket operation.
- Helps maintain correct door pocket alignment.
- Direct replacement for worn or broken original hinges.
- Ideal for interior restoration and refurbishment.
- Suitable for concours-quality restorations.
- Four hinges required per door.
Please verify compatibility with your vehicle's model year and original part number before ordering.
Why Choose OE Match Interior Restoration Parts?
OE Match interior components are designed for Porsche enthusiasts and professional restorers who demand authentic appearance, precise fitment and dependable quality. Every component is manufactured to provide factory-style functionality while preserving the originality of classic Porsche interiors. Whether restoring a concours-winning example or refreshing a well-used driver's car, OE Match products help recreate the quality and craftsmanship of the original interior.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90155503721
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Enhance the appearance of your Porsche interior with this OE Match Door Pockets Alloy Trim Set, manufactured as a direct replacement. Produced to OE-style specifications, this high-quality pair of alloy trims is designed to fit the door pocket assemblies, restoring the original factory appearance while providing a clean and durable finish.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Door pocket alloy trims are a prominent interior detail that contributes to the classic look of the door panels. Over time, the original trims can become scratched, dented, corroded, or faded through regular use and exposure, detracting from the overall appearance of the cabin. This OE Match replacement set restores the authentic look of the interior, making it ideal for routine refurbishment, repairs, and Porsche restoration projects.
What This Product Does:
- Restores the original appearance of the door pocket assemblies.
- Provides a clean and durable decorative finish.
- Covers and finishes the outer edge of the door pockets.
- Enhances the overall appearance of the interior.
- Replaces scratched, damaged, or corroded original trims.
- Maintains the factory-style look of the door panels.
- Provides an OE-style fit and high-quality finish.
Symptoms Of Wear Or Failure:
- Scratched or scuffed alloy trim.
- Dented or distorted trim sections.
- Corrosion or surface pitting.
- Faded or dull finish.
- Loose or poorly fitting trim.
- Missing sections of door pocket trim.
- Damage caused during previous interior repairs.
- Age-related deterioration of the original components.
Why Replacement Matters:
- The door pocket alloy trims are an important finishing detail that helps define the appearance of your Porsche's interior. Worn, damaged, or missing trims can make an otherwise well-maintained cabin appear tired and incomplete, particularly on restored or concours-standard vehicles.
- Replacing the original trims restores the factory-style appearance of the door panels while protecting the edges of the door pocket assemblies. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match alloy trim set provides the correct fit, high-quality finish, and long-lasting durability, making it an excellent choice for maintenance, interior refurbishment, and Porsche restoration projects.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90155501
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
The OE Match Door Pockets Hardware Kit is a premium-quality fastening kit designed to provide the correct hardware for securely installing or replacing door pockets on compatible classic Porsche models. Manufactured to OE specifications for fit, finish and durability, this comprehensive hardware kit contains the essential mounting components required to achieve secure installation while maintaining the authentic factory appearance of the interior.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Manufactured from high-quality automotive-grade steel with a corrosion-resistant finish, each fastener is engineered to withstand continual vibration, regular use and changing cabin temperatures. Designed to match the original Porsche hardware specifications, this kit provides direct OE-style fitment, making it ideal for interior restorations, refurbishment projects or replacing missing, worn or incorrect mounting hardware.
What This Product Does:
- Provides the correct hardware for mounting door pockets.
- Secures the door pockets firmly to the door panel.
- Helps maintain correct alignment of the interior trim.
- Replaces missing, damaged or corroded mounting hardware.
- Supports a secure, rattle-free installation.
- Preserves the original factory appearance.
- Restores factory interior assembly standards.
- Forms an essential part of professional interior restoration.
Symptoms Of Wear Or Failure:
- Loose or unstable door pockets.
- Rattling noises from the door trim.
- Missing or incorrect fasteners.
- Difficulty securing the door pocket correctly.
- Corroded or damaged mounting hardware.
- Door pockets pulling away from the door panel.
- Poor alignment of interior trim components.
- Visible wear or damage around mounting points.
- Incomplete or untidy interior appearance.
- Reduced originality during restoration.
Why Replacement Matters:
- Door pocket mounting hardware is subjected to continual vibration, repeated opening and closing of the doors and regular use throughout the vehicle's life. Over time, fasteners can become loose, corroded, damaged or lost during previous repairs, compromising the security and appearance of the door pockets.
- Loose or incorrectly mounted door pockets can create unwanted rattles, reduce storage functionality and detract from the quality of the vehicle's interior. Using the correct hardware also helps prevent damage to surrounding trim panels and ensures the door pockets remain securely positioned.
- Replacing worn or missing fasteners with the OE Match Door Pockets Hardware Kit restores secure installation and factory-correct interior assembly. Manufactured to OE standards using premium-quality materials with a corrosion-resistant finish, this kit provides factory-style fitment, long-lasting durability and the authentic finishing detail expected for classic Porsche restoration and refurbishment.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Set for both armrests
Fits:
Porsche 911 - 1969 to 1973
Set includes
Spring washer A6 - 90002700403
Cheese head screw M6 x 12 - 900112912901
Cheese head screw M6 x 10 N0147652
Diagram ref no 14 and 15
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
N0147612
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 Carrera 2.7 RS - 1972 to 1973
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90153106700
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
The OE Match Inner Door Handle is a premium-quality replacement interior door release handle designed to restore smooth, reliable operation of the door latch mechanism on compatible classic Porsche models. Manufactured to OE specifications for fit, finish and durability, these handles provide factory-style functionality while maintaining the authentic appearance of the vehicle's interior.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Diagram Ref No 9
Manufactured from high-quality die-cast metal with a durable corrosion-resistant finish, the inner door handles are engineered to withstand repeated daily use while maintaining smooth operation. Precision-manufactured for direct OE-style installation, they connect seamlessly to the original door latch mechanism, ensuring dependable door release and long-lasting performance. Ideal for restoration projects or replacing worn, broken or damaged original handles.
What This Product Does:
- Operates the interior door latch mechanism.
- Allows the door to be opened safely from inside the vehicle.
- Provides smooth and reliable door release.
- Restores factory-style operation and appearance.
- Connects directly to the original door latch assembly.
- Replaces worn, damaged or broken interior handles.
- Improves convenience and passenger safety.
- Forms an essential part of the interior door hardware system.
Symptoms Of Wear Or Failure:
- Difficulty opening the door from inside.
- Loose or excessive movement in the handle.
- Broken or cracked handle body.
- Sticking or rough operation.
- Failure of the handle to release the door latch.
- Worn or damaged pivot mechanism.
- Corrosion or cosmetic deterioration.
- Rattling noises from the door handle assembly.
- Excessive wear from frequent use.
- Poor interior appearance during restoration.
Why Replacement Matters:
- The inner door handle is operated every time the vehicle is entered or exited, making it one of the most frequently used interior components. Over time, continual use, wear, corrosion and ageing can weaken the handle or its pivot mechanism, reducing its reliability and ease of operation.
- A worn or damaged door handle can make it difficult to exit the vehicle quickly and safely, while also placing additional strain on the door latch mechanism. Broken or loose handles can detract from the quality and originality of the interior, particularly on classic Porsche models.
- Replacing a worn or faulty inner door handle restores smooth, dependable door operation and enhances the appearance of the cabin. The OE Match replacement provides factory-style fitment, durable construction and long-lasting reliability, making it the ideal choice for Porsche restoration, repair and preventative maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90153107
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Inner door pocket support bracket
OE Match inner door pocket support bracket for Porsche 911 models from 1969–1973. A replacement component for repairs to the interior door pocket assembly.
Fits
Porsche 911 1969 - 1973
Diagram ref no 16
What This Product Does
The bracket provides support within the inner door pocket assembly. It is intended for replacement of an existing support during pocket repairs or interior restoration, rather than replacement of the complete door panel.
Technical Details
- Brand: OE Match.
- Left support reference: 90155508700; supplied diagram identification /L.
- Right support reference: 90155508800; supplied diagram identification /R.
- The references identify separate sides; check the required version before ordering.
Why Replacement Matters
Renewing a damaged or missing support helps restore the pocket assembly's intended fit and function. Inspect the adjoining pocket, fixing points and hardware before fitting, as other damaged components may also require attention.
Check fitment for your specific vehicle (model, year, engine) before ordering.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90155508
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1975-1977 3.0L Turbo (930)
Fits:
Porsche 911 1965-76
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90153148122
The product you are viewing cross references to these numbers
-
vacuum system for clutch release 911 T:SPM UPTO 1971 107-45
-
Vacuum system for clutch release for 911 T-V:SPM 1972 ONWARDS 107-55
-
Fuel system lines with fuel pump rear for 911 T/E/S 1971 ONWARDS and 911 T-V / CARRERA 2.7 / 911 T-K 1972 ONAWRDS 201-05
-
Oil inlet 911 UPTO 1972 801-40
-
Door lock with installation parts 911 1970-73 804-05
-
Power windows mechanical 911 1970-73 804-10
-
Door glass frame 911 1970-73 COUPE 804-20
-
Interior equipment doors 911 1970-73 807-10
-
Dashboard trim with ashtray and trim cover 911 1970-73 809-00
-
Roof 911 1970-73 TARGA 811-05
-
Ventilation and heating 911 1970-73 813-00
-
air conditioner condenser hoses and mounting parts not for (USA) 911 1970-73 813-65
-
lights fog headlamp 911 1970-73 905-10
-
Doors with installation parts 911 1970-73 804-00
-
power windows electric 911 1970-73 804-15
-
Door glass frame 911 1970-73 TARGA 804-25
-
Heating and ventilation unit with accessories 911 1970-73 813-05
-
Switch 911 1970-73 903-10
OEMatch Door Panel — Fit, Finish, Clarity
Available Types
- Pre-trimmed door cards ready for switch and handle installation
- Complete trim panels supplied with factory-style fixing points
- Panels finished in leather, Alcantara or durable vinyl
Understanding OEMatch Door Panel
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original door panel.
OE (Original Equipment) refers to parts matching original specifications for the door panel and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM door panel engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models.
OEMatch supplies a wide range of Porsche components including interior trim and door hardware, supported by extensive cross-references and an ongoing programme of product development to broaden coverage.
Benefits Include
- Restores interior appearance and tactile quality
- Eliminates rattles and ensures correct alignment of switches and handles
- Improves acoustic insulation and reduces cabin noise
Why Door Panel Wear and Fail
- UV exposure causing fading, cracking or colour change
- Delamination of leather, vinyl or fabric surfaces and adhesive failure
- Broken clips, warped substrates or mechanical damage from repeated use
- Moisture ingress leading to swelling or corrosion of internal fixings
The Importance of Replacing with OEMatch Door Panel
Replacing worn or damaged door panels restores the cabin’s visual and tactile quality and ensures correct fitment of handles, switches and trims. Properly fitted panels prevent unwanted noise and protect internal wiring and mechanisms; in some models they also support airbag deployment areas. Many owners search for genuine or OEM door panels; these items are direct-fit alternatives designed to match the original form, fit and function and suited to restoration or refurbishment of Porsche interiors.
Advantages
- Choice of finishes to match or upgrade factory interiors
- Pre-cut openings and correct mounting points to reduce installation time
- Supplied to align with Porsche fitment and interior design language
Support & Advice
Installation should be carried out by a qualified technician following model-specific procedures and use new fasteners where specified. If you are unsure about hidden sensors, airbag interfaces or correct clip replacement, seek professional assistance.
-
Steering Wheels Without Air Bag
-
Steering Wheels Parts
-
Gearshift
-
Short Gear Shift
-
Handbrake
-
Side Sill Trims
-
Pedals & Parts RHD Cars
-
Pedals & Parts LHD Cars
-
Seat parts
-
Gauge Bezels
-
Instruments
-
Rear 1/4 Panel
-
Parcelshelf / Backwall
-
Roof Headliner
-
Alloy/ Silver Interior
-
Dashboard Parts
-
Dashboard LHD (Restoration)
-
Dashboard RHD (Restoration)
-
Sun Visors and Parts
-
Centre & Middle Console parts
-
Glove Box
-
Coat Hooks / Hangers
