请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
价格匹配保证
全球配送
12 个月保修
转向横拉杆
经过 OE Match
按车型类型筛选
按品牌过滤
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
Steering rack inner & our tie rods kit
* For use with steering rack 99634701104 or 99634701105
This kit provides replacement inner and outer steering tie rods for both sides of the vehicle, together with protective rack bellows. The inner tie rods connect directly to the steering rack, while the outer tie rods and ball joints transfer steering movement to the wheel carriers. The rack bellows protect the inner steering joints and steering rack from dirt, moisture and road contamination.
Complete kit for both sides, includes OE Match tie rods with nuts and TRW rack bellows with clamps
Fits:
Porsche 996 1998 - 2005 all models
Porsche 986 Boxster 1997 - 2004 all models
Diagram ref no 2, 3, 4, 5, 6, 7, 8 and 11
Kit Contents
2 × 99634713105 — OE Match outer tie rods / track rods, , supplied with nut
2 × 99634732203 — OE Match inner tie rods, , supplied with nut
1 × 99634719102 — TRW steering rack bellows kit with clamps - for early rack, OE Steering Rack No.: 996.347.011.05, 996.347.012.05
Associated tie rod nuts as supplied with the kit
What this kit does
Renewing the complete steering linkage helps restore precise steering response and correct front wheel geometry where existing components have developed wear or excessive play. Replacing the inner and outer tie rods together also provides an opportunity to renew the steering rack bellows, helping protect the new components and steering rack from contamination.
Functions:
• Complete steering repair kit for both sides
• Includes left and right inner tie rods
• Includes left and right outer tie rods with ball joints
• Includes tie rod retaining nuts
• Includes TRW steering rack bellows with clamps
• Helps restore accurate steering response
• Helps eliminate excessive steering play
• Supports correct front wheel alignment
• Helps reduce knocking and looseness from worn steering joints
• Protects the steering rack and inner joints from dirt and moisture
• Suitable for a complete front steering linkage overhaul.
Why Replace the Steering Components?
Inner and outer tie rods are exposed to continual steering movement, suspension loads, vibration and road impacts. Their joints can gradually develop wear and play, affecting steering accuracy and wheel alignment. Steering rack bellows can also split, crack or deteriorate with age, allowing water and contamination to reach the inner joints and steering rack.
Common symptoms can include:
• Loose or vague steering
• Knocking or clunking from the front axle
• Excessive play in the steering linkage
• Uneven or accelerated tyre wear
• Difficulty maintaining wheel alignment
• Damaged or split steering rack bellows
• Play detected during servicing or inspection
• Replacing the complete set allows both sides of the steering system to be refreshed together.
Where it fits on the car
The components fit within the front steering rack and steering linkage assembly, connecting the steering rack to the left and right front wheel assemblies.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TRACKRODKIT996.E
您正在查看的产品与这些编号存在交叉引用关系
* For use with steering rack 99634701104 or 99634701105
This kit provides replacement inner and outer steering tie rods for both sides of the vehicle, together with protective rack bellows. The inner tie rods connect directly to the steering rack, while the outer tie rods and ball joints transfer steering movement to the wheel carriers. The rack bellows protect the inner steering joints and steering rack from dirt, moisture and road contamination.
Complete kit for both sides, includes OE Match tie rods with nuts and TRW rack bellows with clamps
Fits:
Porsche 996 1998 - 2005 all models
Porsche 986 Boxster 1997 - 2004 all models
Diagram ref no 2, 3, 4, 5, 6, 7, 8 and 11
Kit Contents
2 × 99634713105 — OE Match outer tie rods / track rods, , supplied with nut
2 × 99634732203 — OE Match inner tie rods, , supplied with nut
1 × 99634719102 — TRW steering rack bellows kit with clamps - for early rack, OE Steering Rack No.: 996.347.011.05, 996.347.012.05
Associated tie rod nuts as supplied with the kit
What this kit does
Renewing the complete steering linkage helps restore precise steering response and correct front wheel geometry where existing components have developed wear or excessive play. Replacing the inner and outer tie rods together also provides an opportunity to renew the steering rack bellows, helping protect the new components and steering rack from contamination.
Functions:
• Complete steering repair kit for both sides
• Includes left and right inner tie rods
• Includes left and right outer tie rods with ball joints
• Includes tie rod retaining nuts
• Includes TRW steering rack bellows with clamps
• Helps restore accurate steering response
• Helps eliminate excessive steering play
• Supports correct front wheel alignment
• Helps reduce knocking and looseness from worn steering joints
• Protects the steering rack and inner joints from dirt and moisture
• Suitable for a complete front steering linkage overhaul.
Why Replace the Steering Components?
Inner and outer tie rods are exposed to continual steering movement, suspension loads, vibration and road impacts. Their joints can gradually develop wear and play, affecting steering accuracy and wheel alignment. Steering rack bellows can also split, crack or deteriorate with age, allowing water and contamination to reach the inner joints and steering rack.
Common symptoms can include:
• Loose or vague steering
• Knocking or clunking from the front axle
• Excessive play in the steering linkage
• Uneven or accelerated tyre wear
• Difficulty maintaining wheel alignment
• Damaged or split steering rack bellows
• Play detected during servicing or inspection
• Replacing the complete set allows both sides of the steering system to be refreshed together.
Where it fits on the car
The components fit within the front steering rack and steering linkage assembly, connecting the steering rack to the left and right front wheel assemblies.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TRACKRODKIT996.E
99634713105
99634713104
99634713103
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
2 x 横拉杆。保时捷 996 / 986 Boxster / 987 Boxster / 987C Cayman (99634713105/2)
单价: €33.32
InStock
2 x 转向拉杆内球头。保时捷 986 / 996 (99634732203/4)
单价: €34.51
InStock
1 x 适用于早期转向机的转向机防尘罩套件。保时捷 Boxster 986 / 996 (99634719102/1)
单价: €31.17
StockDue
价格: €166.83
即将抵达
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
Steering rack inner & our tie rods kit
* For use with steering rack 996.347.011.06, 996.347.011.07, 996.347.012.07, 996.347.012.08
This kit includes replacement inner and outer steering tie rods for both sides of the vehicle, along with protective steering rack bellows. The inner tie rods attach directly to the steering rack, while the outer tie rods with ball joints connect the steering system to the wheel carriers. The rack bellows help protect the steering rack and inner joints from dirt, moisture and road debris.
Complete kit for both sides, includes OE Match tie rods with nuts and TRW rack bellows with clamps
Fits:
Porsche 996 1998 - 2005 all models
Porsche 986 Boxster 1997 - 2004 all models
Diagram ref no 2, 3, 4, 5, 6, 7, 8 and 11
Kit Contents
2 × 99634713105 — OE Match outer tie rods / track rods, , supplied with nut
2 × 99634732203 — OE Match inner tie rods, , supplied with nut
1 × 99634719104 — TRW steering rack bellows kit with clamps - for late rack, OE Steering Rack No.: 996.347.011.06, 996.347.011.07, 996.347.012.07, 996.347.012.08
Associated tie rod nuts as supplied with the kit
What this kit does
Renewing the complete steering linkage helps restore precise steering response and correct front wheel geometry where existing components have developed wear or excessive play. Replacing the inner and outer tie rods together also provides an opportunity to renew the steering rack bellows, helping protect the new components and steering rack from contamination.
Functions:
• Complete steering repair kit for both sides
• Includes left and right inner tie rods
• Includes left and right outer tie rods with ball joints
• Includes tie rod retaining nuts
• Includes TRW steering rack bellows with clamps
• Helps restore accurate steering response
• Helps eliminate excessive steering play
• Supports correct front wheel alignment
• Helps reduce knocking and looseness from worn steering joints
• Protects the steering rack and inner joints from dirt and moisture
• Suitable for a complete front steering linkage overhaul.
Why Replace the Steering Components?
Inner and outer tie rods are exposed to continual steering movement, suspension loads, vibration and road impacts. Their joints can gradually develop wear and play, affecting steering accuracy and wheel alignment. Steering rack bellows can also split, crack or deteriorate with age, allowing water and contamination to reach the inner joints and steering rack.
Common symptoms can include:
• Loose or vague steering
• Knocking or clunking from the front axle
• Excessive play in the steering linkage
• Uneven or accelerated tyre wear
• Difficulty maintaining wheel alignment
• Damaged or split steering rack bellows
• Play detected during servicing or inspection
• Replacing the complete set allows both sides of the steering system to be refreshed together.
Where it fits on the car
The components fit within the front steering rack and steering linkage assembly, connecting the steering rack to the left and right front wheel assemblies.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TRACKRODKIT996.L
您正在查看的产品与这些编号存在交叉引用关系
* For use with steering rack 996.347.011.06, 996.347.011.07, 996.347.012.07, 996.347.012.08
This kit includes replacement inner and outer steering tie rods for both sides of the vehicle, along with protective steering rack bellows. The inner tie rods attach directly to the steering rack, while the outer tie rods with ball joints connect the steering system to the wheel carriers. The rack bellows help protect the steering rack and inner joints from dirt, moisture and road debris.
Complete kit for both sides, includes OE Match tie rods with nuts and TRW rack bellows with clamps
Fits:
Porsche 996 1998 - 2005 all models
Porsche 986 Boxster 1997 - 2004 all models
Diagram ref no 2, 3, 4, 5, 6, 7, 8 and 11
Kit Contents
2 × 99634713105 — OE Match outer tie rods / track rods, , supplied with nut
2 × 99634732203 — OE Match inner tie rods, , supplied with nut
1 × 99634719104 — TRW steering rack bellows kit with clamps - for late rack, OE Steering Rack No.: 996.347.011.06, 996.347.011.07, 996.347.012.07, 996.347.012.08
Associated tie rod nuts as supplied with the kit
What this kit does
Renewing the complete steering linkage helps restore precise steering response and correct front wheel geometry where existing components have developed wear or excessive play. Replacing the inner and outer tie rods together also provides an opportunity to renew the steering rack bellows, helping protect the new components and steering rack from contamination.
Functions:
• Complete steering repair kit for both sides
• Includes left and right inner tie rods
• Includes left and right outer tie rods with ball joints
• Includes tie rod retaining nuts
• Includes TRW steering rack bellows with clamps
• Helps restore accurate steering response
• Helps eliminate excessive steering play
• Supports correct front wheel alignment
• Helps reduce knocking and looseness from worn steering joints
• Protects the steering rack and inner joints from dirt and moisture
• Suitable for a complete front steering linkage overhaul.
Why Replace the Steering Components?
Inner and outer tie rods are exposed to continual steering movement, suspension loads, vibration and road impacts. Their joints can gradually develop wear and play, affecting steering accuracy and wheel alignment. Steering rack bellows can also split, crack or deteriorate with age, allowing water and contamination to reach the inner joints and steering rack.
Common symptoms can include:
• Loose or vague steering
• Knocking or clunking from the front axle
• Excessive play in the steering linkage
• Uneven or accelerated tyre wear
• Difficulty maintaining wheel alignment
• Damaged or split steering rack bellows
• Play detected during servicing or inspection
• Replacing the complete set allows both sides of the steering system to be refreshed together.
Where it fits on the car
The components fit within the front steering rack and steering linkage assembly, connecting the steering rack to the left and right front wheel assemblies.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TRACKRODKIT996.L
99634713105
99634713104
99634713103
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
2 x 横拉杆。保时捷 996 / 986 Boxster / 987 Boxster / 987C Cayman (99634713105/2)
单价: €33.32
InStock
2 x 转向拉杆内球头。保时捷 986 / 996 (99634732203/4)
单价: €34.51
InStock
1 x 适用于后期转向架的转向齿条护套套件。保时捷 Boxster 986 / 996 (99634719104/1)
单价: €19.72
InStock
价格: €155.38
库存
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
转向横拉杆内接头 2 件套。保时捷 986 / 996
2 件套
適用於:
保时捷 986 Boxster 1997-05
保时捷 996 1998-05
保时捷 996 Turbo / GT2 / GT3
转向齿条通过两个横拉杆控制前轮，横拉杆末端为可更换的接头 - “横拉杆端”，与旋转轮毂连接。这些接头最终会磨损，导致转向和操控问题，并成为英国 MOT 的缺陷点，可能也是其他国家法定检验的缺陷点。
单击图片可查看大部件图。
图表参考编号 6。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99634732203
您正在查看的产品与这些编号存在交叉引用关系
2 件套
適用於:
保时捷 986 Boxster 1997-05
保时捷 996 1998-05
保时捷 996 Turbo / GT2 / GT3
转向齿条通过两个横拉杆控制前轮，横拉杆末端为可更换的接头 - “横拉杆端”，与旋转轮毂连接。这些接头最终会磨损，导致转向和操控问题，并成为英国 MOT 的缺陷点，可能也是其他国家法定检验的缺陷点。
单击图片可查看大部件图。
图表参考编号 6。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99634732203
996.347.322.03
99634732203
99634732203
99634732203
99634732203
99634732203
4160310002
58090
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
2 x 转向拉杆内球头。保时捷 986 / 996 (99634732203/4)
单价: €34.51
InStock
价格: €69.02
库存
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Information
Track rod set
Track rod wear is a common steering issue on these vehicles and can lead to excessive play, knocking, inaccurate steering and difficulty maintaining correct wheel alignment. This kit contains two OE Match track rods, each supplied with its ball joint. The same track rod fits either the left or right side, making this set suitable for replacing both sides of the vehicle.
SET OF 2, Left & Right
Fits:
Porsche 996 1998 - 2005 all models
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.1 Cayman 2006 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Diagram ref no 8
What this kit does
Replacing both track rods helps restore accurate steering response and eliminates excessive play caused by worn ball joints or steering rod components. Renewing both sides together is particularly useful during a front steering overhaul and provides a consistent level of wear and performance across the front axle.
Functions
• Replaces both front steering track rods
• Includes two track rods with ball joints
• Covers left and right sides
• Transfers steering movement from the steering rack to the wheels
• Helps restore accurate steering response
• Helps maintain correct front wheel alignment
• Reduces steering play caused by worn joints
• Helps address knocking or looseness in the steering linkage
• Suitable for steering and front suspension overhaul
Why Replace the Track Rods?
The track rod ball joints are subject to constant movement, road impacts, vibration and contamination. Over time, the joints can wear and develop excessive play.
Common symptoms of worn track rods can include:
• Loose or vague steering
• Knocking or clunking from the front axle
• Excessive play in the steering system
• Uneven tyre wear
• Poor or unstable wheel alignment
• Reduced steering precision
• Wear identified during inspection or servicing
Replacing both track rods as a pair helps restore consistent steering performance across the front axle.
Where it fits on the car
The track rods fit between the steering rack and front wheel steering assemblies. This kit provides one track rod for each side of the vehicle.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99634713105
您正在查看的产品与这些编号存在交叉引用关系
Track rod wear is a common steering issue on these vehicles and can lead to excessive play, knocking, inaccurate steering and difficulty maintaining correct wheel alignment. This kit contains two OE Match track rods, each supplied with its ball joint. The same track rod fits either the left or right side, making this set suitable for replacing both sides of the vehicle.
SET OF 2, Left & Right
Fits:
Porsche 996 1998 - 2005 all models
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.1 Cayman 2006 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Diagram ref no 8
What this kit does
Replacing both track rods helps restore accurate steering response and eliminates excessive play caused by worn ball joints or steering rod components. Renewing both sides together is particularly useful during a front steering overhaul and provides a consistent level of wear and performance across the front axle.
Functions
• Replaces both front steering track rods
• Includes two track rods with ball joints
• Covers left and right sides
• Transfers steering movement from the steering rack to the wheels
• Helps restore accurate steering response
• Helps maintain correct front wheel alignment
• Reduces steering play caused by worn joints
• Helps address knocking or looseness in the steering linkage
• Suitable for steering and front suspension overhaul
Why Replace the Track Rods?
The track rod ball joints are subject to constant movement, road impacts, vibration and contamination. Over time, the joints can wear and develop excessive play.
Common symptoms of worn track rods can include:
• Loose or vague steering
• Knocking or clunking from the front axle
• Excessive play in the steering system
• Uneven tyre wear
• Poor or unstable wheel alignment
• Reduced steering precision
• Wear identified during inspection or servicing
Replacing both track rods as a pair helps restore consistent steering performance across the front axle.
Where it fits on the car
The track rods fit between the steering rack and front wheel steering assemblies. This kit provides one track rod for each side of the vehicle.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99634713105
99634713105
99634713104
99634713103
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
2 x 横拉杆。保时捷 996 / 986 Boxster / 987 Boxster / 987C Cayman (99634713105/2)
单价: €33.32
InStock
价格: €66.64
库存
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Spyder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Information
转向齿条拉杆端锁紧螺母，M12 x 1.5
这款原厂配套锁紧螺母为M12 x 1.5规格，是用于多种保时捷车型转向机拉杆端总成的替换紧固螺母。它的设计与原厂保时捷规格完全匹配，可在转向连杆处提供牢固的锁定连接。
单独出售，每辆车需要2个。
适用：
保时捷 993 1995 - 1998
保时捷 996 1998 - 2005
保时捷 997.1 2005 - 2008
保时捷 997.2 2009 - 2012
保时捷 991.1 2012 - 2016
保时捷 991.2 2017 - 2019
保时捷 Boxster 986 1997 - 2004
保时捷 Boxster 987.1 2005 - 2008
保时捷 Boxster 987.2 2009 - 2012
保时捷 Boxster 981 2012 - 2016
保时捷 Boxster 982 (718) 2017 >>
保时捷 Cayman 987C.1 2005 - 2008
保时捷 Cayman 987C.2 2009 - 2012
保时捷 Cayman 981C 2012 - 2016
2017款保时捷Cayman 982C (718C) >>
保时捷 970.1 Panamera 2009 - 2013
保时捷 970.2 Panamera 2014 - 2016
图示编号 10
该锁紧螺母安装在转向连杆总成上，位于转向齿条拉杆端连接处。它用于固定拉杆端的调节位置，并保持正确的转向几何。根据车型不同，它可能用于左侧或右侧的转向拉杆总成。
函数
•将转向齿条拉杆端固定到位
•有助于保持正确的转向对准和前束调整
•防止拉杆端头在使用过程中松动
•支持精准的转向控制和稳定的操控
•有助于减少转向间隙、振动或不必要的移动
•提供与原装锁紧螺母相匹配的OE替换件
•适用于转向齿条、拉杆端和四轮定位相关的维修
转向锁紧螺母是重要的安全紧固件，拆卸后可能会失去锁紧力。它们也可能在转向和悬架维修过程中发生腐蚀、磨损、卡死或损坏。更换锁紧螺母有助于确保拉杆端在维修或车轮定位后保持牢固固定和正确调整。
何时更换
•转向齿条拉杆端头已被拆卸或更换
•车轮定位过程中已调整了拉杆端头。
•原螺母已腐蚀、磨损、卡死或损坏
螺母无法拧紧或牢固锁定。
转向连杆存在间隙、松动或振动。
•正在进行转向齿条或前悬架维修
螺母已被取下，不应重复使用。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99908444909
您正在查看的产品与这些编号存在交叉引用关系
这款原厂配套锁紧螺母为M12 x 1.5规格，是用于多种保时捷车型转向机拉杆端总成的替换紧固螺母。它的设计与原厂保时捷规格完全匹配，可在转向连杆处提供牢固的锁定连接。
单独出售，每辆车需要2个。
适用：
保时捷 993 1995 - 1998
保时捷 996 1998 - 2005
保时捷 997.1 2005 - 2008
保时捷 997.2 2009 - 2012
保时捷 991.1 2012 - 2016
保时捷 991.2 2017 - 2019
保时捷 Boxster 986 1997 - 2004
保时捷 Boxster 987.1 2005 - 2008
保时捷 Boxster 987.2 2009 - 2012
保时捷 Boxster 981 2012 - 2016
保时捷 Boxster 982 (718) 2017 >>
保时捷 Cayman 987C.1 2005 - 2008
保时捷 Cayman 987C.2 2009 - 2012
保时捷 Cayman 981C 2012 - 2016
2017款保时捷Cayman 982C (718C) >>
保时捷 970.1 Panamera 2009 - 2013
保时捷 970.2 Panamera 2014 - 2016
图示编号 10
该锁紧螺母安装在转向连杆总成上，位于转向齿条拉杆端连接处。它用于固定拉杆端的调节位置，并保持正确的转向几何。根据车型不同，它可能用于左侧或右侧的转向拉杆总成。
函数
•将转向齿条拉杆端固定到位
•有助于保持正确的转向对准和前束调整
•防止拉杆端头在使用过程中松动
•支持精准的转向控制和稳定的操控
•有助于减少转向间隙、振动或不必要的移动
•提供与原装锁紧螺母相匹配的OE替换件
•适用于转向齿条、拉杆端和四轮定位相关的维修
转向锁紧螺母是重要的安全紧固件，拆卸后可能会失去锁紧力。它们也可能在转向和悬架维修过程中发生腐蚀、磨损、卡死或损坏。更换锁紧螺母有助于确保拉杆端在维修或车轮定位后保持牢固固定和正确调整。
何时更换
•转向齿条拉杆端头已被拆卸或更换
•车轮定位过程中已调整了拉杆端头。
•原螺母已腐蚀、磨损、卡死或损坏
螺母无法拧紧或牢固锁定。
转向连杆存在间隙、松动或振动。
•正在进行转向齿条或前悬架维修
螺母已被取下，不应重复使用。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99908444909
99908444909
您正在查看的产品与这些编号存在交叉引用关系
价格: €2.44
即将抵达
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
横拉杆内接头
这款原厂配套的转向拉杆内球头可直接替换保时捷986 Boxster、996 Carrera、Turbo、GT2和GT3车型原装的转向部件。转向拉杆内球头负责将转向机的转向运动传递至前轮，同时允许悬架活动。它有助于保持精准的转向响应、稳定的操控性和精确的车轮定位。
单独出售，每辆车需要2个。
适用：
保时捷 986 Boxster 1997 - 2005
保时捷 996 Carrera / Carrera 4 / Carrera 4S 1998 - 2005
保时捷 996 Turbo / GT2 / GT3 2000 - 2005
图示编号 6。
内拉杆球头安装在转向齿条和外拉杆球头之间，负责将转向输入从齿条总成传递到前轮。它允许在转向和悬架运动过程中进行可控的铰接，同时保持精确的车轮定位和转向响应。内拉杆球头的正常工作对于车辆的稳定性、转向精度和安全操控至关重要。
功能
•将转向齿条连接到外横拉杆端
•将转向输入传递至前轮
•保持精准的转向和车轮定位
•可实现可控转向和悬架活动
•支持稳定的操控和转向精度
转向节持续承受载荷、振动和悬架运动的影响。随着时间的推移，球头内部的磨损会导致转向松动、异响、轮胎磨损不均或转向响应迟钝。更换磨损的横拉杆内球头可以恢复安全精准的转向性能，同时保护转向和悬架部件免受进一步磨损。
何时更换
•转向间隙过大或转向感觉模糊
•前悬架发出敲击声或咔嗒声
•轮胎磨损不均或定位问题
•因转向节磨损导致车辆年检或检验不合格
•在转向齿条或悬架维修期间
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99634732203
您正在查看的产品与这些编号存在交叉引用关系
这款原厂配套的转向拉杆内球头可直接替换保时捷986 Boxster、996 Carrera、Turbo、GT2和GT3车型原装的转向部件。转向拉杆内球头负责将转向机的转向运动传递至前轮，同时允许悬架活动。它有助于保持精准的转向响应、稳定的操控性和精确的车轮定位。
单独出售，每辆车需要2个。
适用：
保时捷 986 Boxster 1997 - 2005
保时捷 996 Carrera / Carrera 4 / Carrera 4S 1998 - 2005
保时捷 996 Turbo / GT2 / GT3 2000 - 2005
图示编号 6。
内拉杆球头安装在转向齿条和外拉杆球头之间，负责将转向输入从齿条总成传递到前轮。它允许在转向和悬架运动过程中进行可控的铰接，同时保持精确的车轮定位和转向响应。内拉杆球头的正常工作对于车辆的稳定性、转向精度和安全操控至关重要。
功能
•将转向齿条连接到外横拉杆端
•将转向输入传递至前轮
•保持精准的转向和车轮定位
•可实现可控转向和悬架活动
•支持稳定的操控和转向精度
转向节持续承受载荷、振动和悬架运动的影响。随着时间的推移，球头内部的磨损会导致转向松动、异响、轮胎磨损不均或转向响应迟钝。更换磨损的横拉杆内球头可以恢复安全精准的转向性能，同时保护转向和悬架部件免受进一步磨损。
何时更换
•转向间隙过大或转向感觉模糊
•前悬架发出敲击声或咔嗒声
•轮胎磨损不均或定位问题
•因转向节磨损导致车辆年检或检验不合格
•在转向齿条或悬架维修期间
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99634732203
99634732203
4160310002
58090
您正在查看的产品与这些编号存在交叉引用关系
价格: €34.51
库存
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Information
横拉杆
这款原厂配套的横拉杆是包含球头接头的完整转向系统替换件。它连接转向齿条和前轮转向机构，传递转向运动，同时确保悬架和转向系统正常工作。该部件左右两侧均适用。
单独出售，每侧需要 1 个，如果两侧都更换，每辆车需要 2 个。
适用：
保时捷 996 1998 - 2005 所有车型
保时捷 997.1 2005 - 2008 所有车型
保时捷 997.2 2009 - 2012 所有车型
保时捷 986 Boxster 1997 - 2004
保时捷 987.1 Boxster 2005 - 2008
保时捷 987.2 Boxster 2009 - 2012
保时捷 987C.1 Cayman 2006 - 2008
保时捷 987C.2 Cayman 2009 - 2012
图示编号 8 + 11
这部分的作用
横拉杆将转向机的转向信号传递到前轮。球头连接件允许可控的运动，同时有助于保持正确的转向几何和车轮定位。磨损的横拉杆会给转向系统带来不必要的运动，导致转向模糊、异响或轮胎磨损不均。
函数
•更换前转向拉杆
•配有球形接头
•左右通用
•将转向动作传递至前轮
•有助于保持正确的转向几何
•支持精确的前轮定位
•有助于减少转向间隙和松动
•有助于消除因转向节磨损引起的敲击声
•适用于转向和悬挂系统的维修
为什么要更换这个部件？
横拉杆球头是常见的磨损点，会受到持续的转向运动、道路冲击、振动和污染的影响。
磨损迹象可能包括：
•转向松动或模糊
•前轴发出敲击声或咔嗒声
•球头关节活动过度
•轮胎磨损不均
•难以保持车轮定位
•转向精度降低
•维修或检查过程中发现的磨损
更换磨损的横拉杆有助于恢复精准的转向和正确的前轴几何结构。
它安装在车上的哪个位置
安装在前转向系统内，位于转向齿条和前轮转向机构之间。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99634713105
您正在查看的产品与这些编号存在交叉引用关系
这款原厂配套的横拉杆是包含球头接头的完整转向系统替换件。它连接转向齿条和前轮转向机构，传递转向运动，同时确保悬架和转向系统正常工作。该部件左右两侧均适用。
单独出售，每侧需要 1 个，如果两侧都更换，每辆车需要 2 个。
适用：
保时捷 996 1998 - 2005 所有车型
保时捷 997.1 2005 - 2008 所有车型
保时捷 997.2 2009 - 2012 所有车型
保时捷 986 Boxster 1997 - 2004
保时捷 987.1 Boxster 2005 - 2008
保时捷 987.2 Boxster 2009 - 2012
保时捷 987C.1 Cayman 2006 - 2008
保时捷 987C.2 Cayman 2009 - 2012
图示编号 8 + 11
这部分的作用
横拉杆将转向机的转向信号传递到前轮。球头连接件允许可控的运动，同时有助于保持正确的转向几何和车轮定位。磨损的横拉杆会给转向系统带来不必要的运动，导致转向模糊、异响或轮胎磨损不均。
函数
•更换前转向拉杆
•配有球形接头
•左右通用
•将转向动作传递至前轮
•有助于保持正确的转向几何
•支持精确的前轮定位
•有助于减少转向间隙和松动
•有助于消除因转向节磨损引起的敲击声
•适用于转向和悬挂系统的维修
为什么要更换这个部件？
横拉杆球头是常见的磨损点，会受到持续的转向运动、道路冲击、振动和污染的影响。
磨损迹象可能包括：
•转向松动或模糊
•前轴发出敲击声或咔嗒声
•球头关节活动过度
•轮胎磨损不均
•难以保持车轮定位
•转向精度降低
•维修或检查过程中发现的磨损
更换磨损的横拉杆有助于恢复精准的转向和正确的前轴几何结构。
它安装在车上的哪个位置
安装在前转向系统内，位于转向齿条和前轮转向机构之间。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99634713105
99634713105
99634713104
99634713103
您正在查看的产品与这些编号存在交叉引用关系
价格: €33.32
库存
显示从1到7（共7个产品）
也可在这些页面找到
-
cross member wishbone 996 1998-05 401-00
-
power steering, steering gear, steering parts 996 1998-05 403-00
-
rear axle, wheel carrier, control arm, wheel hub 996 1998-05 501-00
-
cross member wishbone 996 TURBO 2001-05 401-00
-
power steering, steering gear, steering parts 996 TURBO 2001-05 403-00
-
rear axle, wheel carrier, control arm, wheel hub 996 TURBO 2001-05 501-00
-
power steering, steering gear, steering parts 996 GT3-1 1999-05 403-00
-
rear axle, wheel carrier, control arm, wheel hub 996 GT3-1 1999-05 501-00
关于转向横拉杆
OEMatch 拉杆——完美贴合、功能卓越、值得信赖
OEMatch 提供一系列专为保时捷车型设计的转向拉杆，旨在确保精准的转向和可靠的定位。这些零件适用于日常维护、修复或升级转向控制系统，并在原厂零件缺货时提供实用的替代方案。
可用类型
- 更换横拉杆
- 拉杆端头
- 完整的拉杆总成
了解 OEMatch 转向拉杆
原厂配套 (OEM) 零件由生产您保时捷原厂转向拉杆的同一家公司制造。原厂配套 (OE) 零件是指符合原厂转向拉杆规格的零件，可能由其他制造商提供。售后市场零件提供其他选择，有时具有更强大的功能或更高的性价比。OEMatch 提供非原厂转向拉杆，这些拉杆经过精心设计，可直接替代原厂零件，并按照保时捷车型的原厂规格尺寸和公差制造。
横拉杆连接转向齿条和轮毂，将转向输入传递至车轮，并有助于保持车轮定位和可预测的几何形状。功能正常的横拉杆可确保精准的过弯、均衡的轮胎磨损和一致的转向反馈，所有这些都有助于实现保时捷车辆特有的操控性能。
福利包括
- 恢复转向精度和灵敏的转向响应
- 有助于保持车轮定位并减少轮胎不均匀磨损
- 采用坚固耐用、耐腐蚀的材料制成，使用寿命长
为什么转向拉杆会磨损和失效
- 球头接头和连杆磨损导致间隙过大
- 橡胶靴损坏或腐蚀会导致污染和加速磨损
- 冲击或震动损伤以及与老化相关的金属疲劳或螺纹卡死
使用原厂匹配的转向拉杆的重要性
更换磨损的横拉杆可以恢复车轮定位精度，提高转向精度，并防止轮胎加速磨损。对于保时捷车型而言，及时更换横拉杆有助于确保安全操控和车轮几何结构的一致性，从而在日常保养或事故损坏后保持车辆的行驶性能和悬架设置。
优势
- 直接适配的替代品，尺寸和公差均符合原厂规格。
- 坚固耐用的结构和防腐蚀保护，延长使用寿命
- 适用于各种经典和现代保时捷车型
您可能也喜欢
流行车型
