do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Cabrio
By OE Match
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Cabriolet hood “B-pillar” weatherstrip used on Porsche 911 models from 1974–1985. This is fitted to the Cabrio top rail and sits vertically to seal the window against the top.
Fits:
Porsche 911 1974 - 1985
Diagram Ref: 16
Each seal is moulded to the original Porsche profile, ensuring perfect alignment with the B-pillar frame and correct compression against the window glass. When these seals deteriorate - with age-related cracking, shrinking, hardening or gaps - they allow wind noise, drafts and water to enter the cabin. Installing fresh seals restores proper sealing performance and the factory-correct appearance of the Cabriolet side window area.
Old B-pillar seals commonly:
• Crack or shrink, leaving gaps
• Harden, causing poor sealing and excessive wind noise
• Fail to contact the window glass properly
• Lead to water leaks and wet carpets
• Ruin the otherwise clean look of the Cabriolet roof area
Replacing them restores:
• Proper sealing performance
• Quieter and more comfortable cabin
• Protection from rain and drafts
• A factory-correct Cabriolet appearance
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156122
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
The OE MATCH Cabriolet Hood Roof Seal, Lateral is a high-quality replacement pair of side seals designed for the convertible hood (soft top) assembly on classic Porsche Cabriolet models. Positioned along the lateral edges of the folding roof, these seals create a weather-tight barrier between the hood frame, side windows, and bodywork, helping to prevent water ingress, wind noise, and drafts while maintaining proper roof alignment and sealing performance.
Fits:
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Diagram Ref No 7
Manufactured to OE specifications from durable automotive-grade rubber, these lateral roof seals provide excellent flexibility, precise fitment, and long-term resistance to UV exposure, moisture, and temperature fluctuations. They are essential replacement components for restoration projects or when renewing worn, hardened, or damaged original hood seals.
What This Product Does:
- Creates a weather-tight seal along the sides of the Cabriolet hood
- Helps prevent water ingress into the cabin
- Reduces wind noise and drafts while driving
- Provides a proper sealing surface between the roof and side windows
- Supports correct hood alignment and fitment
- Maintains cabin comfort and weather protection
Symptoms Of Wear Or Failure:
- Water leaks around the side windows or roof edges
- Increased wind noise while driving
- Cracked, split, or perished rubber material
- Hardened, flattened, or shrunken seals
- Visible gaps between the roof and side windows
- Drafts entering the cabin
- Moisture accumulation inside the vehicle
- Difficulty achieving a proper roof seal when closed
Why Replacement Matters:
- Restores effective weatherproof sealing of the convertible roof
- Helps prevent water ingress and interior damage
- Reduces wind noise and improves cabin refinement
- Maintains proper roof-to-window alignment and sealing
- Protects interior trim, carpets, and electronics from moisture
- Improves comfort during all-weather driving conditions
- Supports high-quality restoration and refurbishment projects
- Provides durable OE-quality fit, finish, and long-term reliability
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156120
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 1967-85
Diagram Ref: 42
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156509047
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Restore the front mounting integrity of your Porsche 911 Targa’s / Cabrio's roof mechanism with this repair mount. Specifically designed for 911 Targa (1967-1985) and Cabriolet models (1982-1985), this kit includes mount and tension spring to replace worn or damaged front roof attachment points.
2pcs will be needed if you want to repair both mechanisms.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits On To Diagram Ref No 3
What This Product Does:
- The Targa roof or Convertible top mechanism on classic 911s uses mounts/attachments to latch, pivot or tension the roof panel correctly.
- This repair mount is likely a small but critical component: it could serve as a mount point or pivot for the front Targa roof bar, or the latch/hinge assembly.
- The included tension spring suggests it plays a role in the roof-mechanism’s spring-loaded or tensioned latch/pivot function.
- Because it is labeled “repair mount”, it is likely used when the original mount has worn, broken, or been replaced incorrectly.
Signs You Might Need It:
- The roof panel doesn’t line up correctly, has excessive play, or the front bar doesn’t seat flush with the body when the roof is closed.
- The roof mechanism (especially the front section) feels loose or worn, or you find the mount/pivot is broken, cracked or missing.
- The tension spring associated with the mount is missing, fatigued, weak or broken, causing the roof latch not to hold firmly.
- During a restoration or refurb, the original mount is corroded, has poor repair history, or rust has eaten the mounting point.
- The roof could be mis-aligned, rattles, leaks at the front edge, or the roof bar is not seating properly — indicating the mount that holds the bar might have failed.
Why Replacement Matters:
- Roof integrity & alignment: The roof’s fit and finish depend on correct mounts and tensioning. A worn mount can lead to misalignment, water ingress, wind noise and reduced value.
- Correct operation: The roof mechanism must pivot, latch and hold reliably. A compromised mount can affect the reliable opening/closing of the roof.
- Preserves structural & aesthetic value: On classic 911 models, original mechanism parts matter for authenticity, fitment and resale.
- Prevents further damage: A faulty mounting point can lead to stress on adjacent components (roof bar, hinge, seals) — replacing the mount helps prevent accelerated wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91156503141
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Tenax
Fastener Cap – Brass
Sold each
Complete your Porsche restoration with this OE
Match Brass Tenax Fastener Cap. This premium replacement fastener cap
provides a secure quick-release fastening solution while maintaining the
authentic appearance of your Porsche's trim, tonneau cover or protective cover
fixings.
Fits:
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
The Tenax fastening system has been trusted for decades in automotive applications thanks to its secure locking mechanism, durability and ease of use. The stud forms the fixed mounting point that the Tenax fastener cap locks onto, providing a reliable connection while allowing quick removal whenever required.
Over time, original studs can become corroded, damaged or worn through repeated use, reducing the effectiveness of the fastening system and detracting from the appearance of the vehicle. Manufactured to OE Match standards and finished in black, this replacement stud restores both functionality and the correct period appearance.
What Does the Tenax Fastener Stud Do?
The Tenax fastener stud acts as the fixed anchor point for the Tenax quick-release fastening system.
Its primary functions include:
- Providing a secure mounting point for the Tenax fastener.
- Holding trim and covers firmly in place.
- Allowing quick installation and removal.
- Maintaining correct alignment of attached components.
- Reducing movement and vibration.
- Preserving the original appearance of the fastening system.
The precision profile ensures reliable engagement with the corresponding Tenax fastener cap.
Why Replace the Tenax Fastener Stud?
Although small, Tenax studs are exposed to years of use and environmental conditions.
Common reasons for replacement include:
- Corrosion or worn finish.
- Damaged or worn locking profile.
- Bent or broken stud.
- Loose mounting.
- Missing original hardware.
- Restoration of trim or tonneau covers.
- General refurbishment of fastening systems.
Replacing worn studs restores the correct operation of the complete Tenax fastening system while improving the appearance of your Porsche.
Features
- OE Match replacement Tenax fastener stud.
- Correct black finish.
- Precision manufactured for accurate fitment.
- Durable corrosion-resistant construction.
- Secure mounting for Tenax fastener caps.
- Reliable quick-release fastening performance.
- Restores factory-style appearance.
- Ideal for restoration and refurbishment projects.
- Direct replacement for worn or damaged original studs.
Why Choose OE Match Restoration Hardware?
OE Match restoration hardware is manufactured for Porsche enthusiasts and restoration specialists who appreciate precision, authenticity and durability. Every fastener, clip and mounting component is engineered to provide dependable performance while maintaining the original appearance of your vehicle. These seemingly small details contribute significantly to the quality of a professional restoration.
Please note:
Will work perfectly with:
- Lower Tenax, Stud, part number 99959159802/1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959181012
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
Tenax Fastener Cap – Chrome
Sold each
Restore the finishing details of your Porsche with this OE
Match Chrome Tenax Fastener Cap. This premium replacement
fastener cap provides a secure attachment point while maintaining the original
appearance of your vehicle's trim and soft-top or tonneau fastening system.
Fits:
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
Cabriolet Models Only
Tenax fasteners have long been used throughout the
automotive industry due to their secure locking design, ease of operation and
clean appearance. On classic and air-cooled Porsche models, they are commonly
found securing tonneau covers, protective covers and various trim components
where a reliable quick-release fixing is required.
Size: 20 x 15 x 11mm
Finish: Chrome Plated Brass
Over time, original fasteners can become worn, corroded or damaged through repeated use and exposure to the elements. Replacing them with high-quality OE Match components restores both functionality and the authentic factory presentation of your Porsche.
Finished in durable chrome, this Tenax fastener cap provides excellent corrosion resistance while complementing the period styling of your vehicle.
What Does a Tenax Fastener Cap Do?
The Tenax fastener cap forms part of the quick-release fastening system used to securely attach trim panels, tonneau covers or protective covers while allowing quick removal when required.
Its primary functions include:
- Providing a secure quick-release fastening point.
- Holding trim or covers firmly in position.
- Allowing easy removal without tools.
- Reducing movement and vibration.
- Maintaining the original appearance of the vehicle.
- Delivering reliable long-term fastening performance.
The spring-loaded locking mechanism offers a dependable connection while remaining simple to operate.
Why Replace the Tenax Fastener Cap?
Small hardware components are often overlooked during restoration but play an important role in both appearance and functionality.
Common reasons for replacement include:
- Corrosion or tarnished chrome.
- Worn locking mechanism.
- Loose or damaged fasteners.
- Missing original hardware.
- Broken retaining components.
- Vehicle restoration or trim refurbishment.
- Replacement following soft-top or tonneau cover repairs.
Replacing worn fasteners restores secure operation and helps preserve the authentic appearance of your Porsche.
Features
- OE Match replacement Tenax fastener cap.
- Bright chrome finish.
- Precision manufactured for accurate fitment.
- Durable corrosion-resistant construction.
- Secure quick-release locking mechanism.
- Restores original fastening performance.
- Ideal for restoration and refurbishment projects.
- Direct replacement for worn or damaged original fasteners.
- Suitable for concours-standard restorations.
Please note:
Will work perfectly with:
- Lower Tenax, Stud, part number 99959159802/1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959160112
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Size: 4.2mm x 10mm
Finish: Black Chrome Plated Brass/Steel
Fits:
Porsche 911 1978 - 1989 CABRIO
Porsche 964 1989 - 1994 CABRIO
Diagram ref no 35
Position: Body mounting point for convertible top or tonneau cover Tenax fasteners
Sold as: Individual fastener stud, 6 required per vehicle
The Tenax fastener stud acts as the fixed mounting point for Tenax snap fasteners used on convertible top covers or protective tonneau covers. When paired with the matching Tenax cap, it creates a secure locking system that holds fabric covers firmly in place while still allowing quick removal when needed.
Replacing worn or damaged studs restores the proper attachment points for convertible covers and helps maintain the original functionality and appearance of the vehicle’s roof system.
Function
• Convertible Cover Mounting: Provides anchor point for Tenax snap fasteners
• Secure Fastening: Keeps tonneau or roof covers firmly attached to the body
• Quick Release Design: Allows easy removal of covers when required
• Durability: Chrome-plated brass/steel construction resists corrosion and wear
Tenax studs are exposed to weather, repeated use and vibration. Over time they may corrode, loosen or become damaged, which can prevent convertible covers from fastening securely. Installing a new OE Match stud restores the original fastening system and ensures that covers remain securely attached while preserving the classic Porsche appearance.
Replace the Tenax fastener if you notice:
• Loose or missing convertible cover fasteners
• Corrosion or damage to the stud
• Difficulty attaching Tenax caps
• During convertible top or tonneau cover restoration
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959159702
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
Tenax Fastener Stud – Black
Sold each
Complete your Porsche restoration with this OE Match
Black Tenax Fastener Stud, part number 99959159802. This high-quality replacement
stud provides the secure anchor point required for Tenax quick-release fastener
systems, ensuring trim panels, tonneau covers and protective covers remain
firmly attached while maintaining an authentic factory appearance.
Fits:
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
Cabriolet Models Only
Diagram ref no 35
The Tenax fastening system has been trusted for decades in
automotive applications thanks to its secure locking mechanism, durability and
ease of use. The stud forms the fixed mounting point that the Tenax fastener
cap locks onto, providing a reliable connection while allowing quick removal
whenever required.
Size: 4.2mm x 16mm
Finish: Black
Over time, original studs can become corroded, damaged or worn through repeated use, reducing the effectiveness of the fastening system and detracting from the appearance of the vehicle. Manufactured to OE Match standards and finished in black, this replacement stud restores both functionality and the correct period appearance.
What Does the Tenax Fastener Stud Do?
The Tenax fastener stud acts as the fixed anchor point for the Tenax quick-release fastening system.
Its primary functions include:
- Providing a secure mounting point for the Tenax fastener.
- Holding trim and covers firmly in place.
- Allowing quick installation and removal.
- Maintaining correct alignment of attached components.
- Reducing movement and vibration.
- Preserving the original appearance of the fastening system.
The precision profile ensures reliable engagement with the corresponding Tenax fastener cap.
Why Replace the Tenax Fastener Stud?
Although small, Tenax studs are exposed to years of use and environmental conditions.
Common reasons for replacement include:
- Corrosion or worn finish.
- Damaged or worn locking profile.
- Bent or broken stud.
- Loose mounting.
- Missing original hardware.
- Restoration of trim or tonneau covers.
- General refurbishment of fastening systems.
Replacing worn studs restores the correct operation of the complete Tenax fastening system while improving the appearance of your Porsche.
Features
- OE Match replacement Tenax fastener stud.
- Correct black finish.
- Precision manufactured for accurate fitment.
- Durable corrosion-resistant construction.
- Secure mounting for Tenax fastener caps.
- Reliable quick-release fastening performance.
- Restores factory-style appearance.
- Ideal for restoration and refurbishment projects.
- Direct
replacement for worn or damaged original studs.
Why Choose OE Match Restoration Hardware?
OE Match restoration hardware is manufactured for Porsche enthusiasts and restoration specialists who appreciate precision, authenticity and durability. Every fastener, clip and mounting component is engineered to provide dependable performance while maintaining the original appearance of your vehicle. These seemingly small details contribute significantly to the quality of a professional restoration.
Please note:Will work perfectly with :
- Chrome Cap, part number SMC000949 and
- Brass Cap, part number SMC001949
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959159802
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Size: 4.2mm x 10mm
Finish: Chrome Plated Brass/Steel
Fits:
Porsche 911 1978 - 1989 CABRIO
Porsche 964 1989 - 1994 CABRIO
Diagram ref no 35
Position: Body mounting point for convertible top or tonneau cover Tenax fasteners
Sold as: Individual fastener stud, 6 required per vehicle
The Tenax fastener stud acts as the fixed mounting point for Tenax snap fasteners used on convertible top covers or protective tonneau covers. When paired with the matching Tenax cap, it creates a secure locking system that holds fabric covers firmly in place while still allowing quick removal when needed.
Replacing worn or damaged studs restores the proper attachment points for convertible covers and helps maintain the original functionality and appearance of the vehicle’s roof system.
Function
• Convertible Cover Mounting: Provides anchor point for Tenax snap fasteners
• Secure Fastening: Keeps tonneau or roof covers firmly attached to the body
• Quick Release Design: Allows easy removal of covers when required
• Durability: Chrome-plated brass/steel construction resists corrosion and wear
Tenax studs are exposed to weather, repeated use and vibration. Over time they may corrode, loosen or become damaged, which can prevent convertible covers from fastening securely. Installing a new OE Match stud restores the original fastening system and ensures that covers remain securely attached while preserving the classic Porsche appearance.
Replace the Tenax fastener if you notice:
• Loose or missing convertible cover fasteners
• Corrosion or damage to the stud
• Difficulty attaching Tenax caps
• During convertible top or tonneau cover restoration
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959159702
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Size: 4.2mm x 16mm
Finish: Chrome Plated Stainless Steel
Fits:
Porsche 993 (1989-1998) CABRIO
Will also work for all 356 and early 911 models as well.
Please note:
Will work perfectly with :
- Chrome Cap, part number SMC000949 and
- Brass Cap, part number SMC001949
This is the same as part number 99959159702/2, but longer.
Click 'Zoom in' for large parts diagram.
Diagram ref no 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959159802
The product you are viewing cross references to these numbers
OEMatch Cabrio — Fit, Function, Confidence
OEMatch supplies replacement cabrio items for Porsche models to support repair and restoration of convertible roof systems. Many owners search for genuine or OEM cabrio parts; OEMatch offers compatible replacements engineered to match the original form, fit and function to restore operation and sealing.
Available Types
- Soft tops and complete fabric assemblies
- Roof motors, actuators and electric drive units
- Hydraulic lines, pumps and fittings
- Seals, gaskets and weatherstrips
- Rear windows, framing and bonded panels
- Linkage, cables and mounting hardware
Understanding OEMatch Cabrio
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original cabrio. OE (Original Equipment) refers to parts matching original specifications for the cabrio and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM cabrio engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models. OEMatch also maintains an extensive catalogue covering soft tops, motors, hydraulic components, seals, cables and rear windows, with over 4,000 part numbers and more than 8,700 OE cross-references and ongoing product development to support different Porsche generations.
Benefits Include
- Restores watertight sealing to prevent water ingress and interior damage
- Recovers smooth automatic or manual roof operation and quiet closure
- Preserves the vehicle’s original design lines and passenger comfort
Why Cabrio Wear and Fail
- Wear and fatigue of hydraulic or electric motors from repeated use
- Leaking seals, perished gaskets or cracked rear windows
- Faded, torn or weakened fabric due to UV and weather exposure
- Aging mechanical linkages causing slow, uneven or noisy operation
The Importance of Replacing with OEMatch Cabrio
Timely renewal of cabrio components reduces the risk of water ingress, corrosion and electrical faults that can follow a failed roof system. Replacing worn seals, motors or rear windows helps maintain interior condition and prevents secondary damage to trim and electronics, supporting both daily use and long-term preservation of the vehicle.
Advantages
- Direct-fit replacements engineered to match original dimensions and tolerances
- Wide coverage of part numbers and OE cross-references to aid correct selection
- Practical alternatives where factory items are difficult to source, chosen for Porsche applications
