do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Wiring Harness / Cables
By OE Match
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Fuel Injector Connector Protective Rubber Boot
Kit contains 4 boots
High-quality protective rubber boot designed for the fuel injector connector on Porsche 924S and 944 models, providing essential protection for the electrical connection.
This rubber boot fits over the injector connector, shielding
it from heat, moisture, dirt, and engine bay contaminants, helping to maintain
reliable electrical contact and prevent premature wear or failure.
Fits:
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944 Turbo 2.5L 8V 1985-88
Sold individually, this component is ideal for replacing cracked, hardened, or missing boots during maintenance or restoration of the fuel injection system.
Key Features
• Protective rubber boot for fuel injector connector
• Suitable for Porsche 924S, 944
• Shields electrical connections from contaminants
• Helps maintain reliable injector operation
• Flexible, heat-resistant rubber construction
• OEM-style fit and appearance
• Ideal for restoration and repair work
• Sold individually
Function and Purpose
This rubber boot plays a key role in protecting injector wiring.
It helps to:
• Protect electrical connections from dirt and moisture
• Reduce risk of corrosion and electrical faults
• Maintain consistent injector signal reliability
• Extend lifespan of wiring connectors
• Support overall engine performance
Why Replace Injector Connector Boots
Over time, rubber components deteriorate due to heat and exposure.
Common issues include:
• Cracked or brittle rubber
• Missing or damaged boots
• Exposure of connectors to contaminants
• Increased risk of electrical faults
Replacing worn boots helps ensure reliable fuel injection system performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94461212802
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Fuel Injector Connector Protective Rubber Boot Kit
Kit contains 8 caps
High-quality protective rubber boot kit designed for the fuel injector connectors on Porsche 928 models, providing essential protection for the electrical connection.
This rubber boot fits over the injector connector, shielding
it from heat, moisture, dirt, and engine bay contaminants, helping to maintain
reliable electrical contact and prevent premature wear or failure.
Fits:
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Diagram ref no 2
Sold individually, this component is ideal for replacing cracked, hardened, or missing boots during maintenance or restoration of the fuel injection system.
Key Features
• Protective rubber boot for fuel injector connector
• Suitable for Porsche 928
• Shields electrical connections from contaminants
• Helps maintain reliable injector operation
• Flexible, heat-resistant rubber construction
• OEM-style fit and appearance
• Ideal for restoration and repair work
• Sold individually
Function and Purpose
This rubber boot plays a key role in protecting injector wiring.
It helps to:
• Protect electrical connections from dirt and moisture
• Reduce risk of corrosion and electrical faults
• Maintain consistent injector signal reliability
• Extend lifespan of wiring connectors
• Support overall engine performance
Why Replace Injector Connector Boots
Over time, rubber components deteriorate due to heat and exposure.
Common issues include:
• Cracked or brittle rubber
• Missing or damaged boots
• Exposure of connectors to contaminants
• Increased risk of electrical faults
Replacing worn boots helps ensure reliable fuel injection system performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94461212802
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
.jpg?width=197 "Clamp B15 with Various Applications. Porsche 911 / 964 / 993 / 924S / 944 / 968 / 928 - 99951111801, 99951111802, N0206021, N0206022 - PRSGU11")
- Porsche 911 1978-1983 3.0L / SC
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
Clamp B15 – Multi-Application Hose, Cable
& Pipe Clamp
Sold each
High-quality B15 clamp designed for a wide range of Porsche applications across multiple models.
This versatile clamp is used in various locations including engine
wiring looms on the 911SC, air conditioning pipes on 928 S4, 964, and
993, throttle cable routing on the 968, expansion tank hoses on
924S and 944, and automatic gearbox cooling lines on 924S and 944 models.
Fits:
- Porsche 911 1978-1983 3.0L / SC
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1985-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
Manufactured to OEM specifications, this clamp ensures secure mounting, durability, and resistance to heat and corrosion. Supplied individually, it is ideal for maintenance, repair, or restoration across multiple Porsche systems.
Key Features
• Clamp size B15
• Suitable for multiple Porsche models and applications
• Part number 99951111801
• Multi-use: wiring loom, AC pipes, throttle cable, cooling lines
• Ensures secure mounting and correct routing
• Prevents vibration-related wear and movement
• Durable and corrosion-resistant construction
• OEM-style fit and performance
• Sold individually
Function and Purpose
This clamp is designed to secure hoses, cables, and pipes across various systems.
It helps to:
• Hold wiring looms securely in place
• Maintain correct routing of AC pipes
• Secure throttle cables and cooling lines
• Prevent vibration-related wear or damage
• Ensure long-term system reliability
Why Replace Clamps
Clamps can degrade over time due to heat, pressure, and environmental exposure.
Common issues include:
• Loss of clamping strength
• Corrosion or fatigue
• Movement of hoses, cables, or pipes
• Increased risk of wear or system failure
Replacing worn clamps ensures proper securing and protects critical components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99951111801
The product you are viewing cross references to these numbers
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Ignition Coil Ground Strap Set – Left & Right Earth Cables
High-quality ignition coil ground strap set designed for Porsche 928 S2 and 928 S4 models from 1985 onwards.
This set includes both left (driver’s side) and right
(passenger side) ground cables, providing the essential electrical connection
between the ignition coils and the cylinder heads. These earth straps ensure
proper grounding of the ignition system, supporting consistent spark
performance and reliable engine operation.
Fits:
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Diagram ref no 27 and 28
Manufactured using durable, high-conductivity materials with robust insulation and terminals, these cables are designed to withstand engine bay heat, vibration, and long-term use while maintaining optimal electrical performance.
A direct replacement set, these ignition coil ground straps are critical for maintaining ignition system reliability and preventing electrical faults.
Key Features
• Complete set of left and right ignition coil ground straps
• Suitable for Porsche 928S (from 1985 onwards)
• Provides secure grounding between ignition coils and cylinder head
• High-conductivity cable construction for reliable performance
• Durable insulation for engine bay conditions
• OEM-style fit and function
Function and Purpose
These ground straps provide the critical electrical grounding path for the ignition coils.
They help to:
• Ensure stable and consistent ignition performance
• Prevent electrical resistance or grounding faults
• Support proper spark generation
• Maintain reliable engine operation
Why Replace Your Ignition Coil Ground Straps
Over time, ground cables can degrade due to heat, corrosion, and vibration.
Common issues include:
• Corroded or oxidised terminals
• Frayed or damaged cables
• Increased electrical resistance
• Poor grounding leading to ignition issues
Replacing the ground straps restores proper electrical flow and helps prevent ignition system faults.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92861281
The product you are viewing cross references to these numbers
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Fuel Injector Connector Protective Rubber Boot
Sold each
High-quality protective rubber boot designed for the fuel injector connector on Porsche 924S, 944, and 928 models, providing essential protection for the electrical connection.
This rubber boot fits over the injector connector, shielding
it from heat, moisture, dirt, and engine bay contaminants, helping to maintain
reliable electrical contact and prevent premature wear or failure.
Fits:
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Diagram ref no 2
Sold individually, this component is ideal for replacing cracked, hardened, or missing boots during maintenance or restoration of the fuel injection system.
Key Features
• Protective rubber boot for fuel injector connector
• Suitable for Porsche 924S, 944, and 928
• Shields electrical connections from contaminants
• Helps maintain reliable injector operation
• Flexible, heat-resistant rubber construction
• OEM-style fit and appearance
• Ideal for restoration and repair work
• Sold individually
Function and Purpose
This rubber boot plays a key role in protecting injector wiring.
It helps to:
• Protect electrical connections from dirt and moisture
• Reduce risk of corrosion and electrical faults
• Maintain consistent injector signal reliability
• Extend lifespan of wiring connectors
• Support overall engine performance
Why Replace Injector Connector Boots
Over time, rubber components deteriorate due to heat and exposure.
Common issues include:
• Cracked or brittle rubber
• Missing or damaged boots
• Exposure of connectors to contaminants
• Increased risk of electrical faults
Replacing worn boots helps ensure reliable fuel injection system performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94461212802
The product you are viewing cross references to these numbers
OEMatch Wiring Harness / Cables — Fit, Function, Confidence
OEMatch Wiring Harness / Cables for Porsche models provide replacements and repair items for engine, lighting, sensors and vehicle electrical systems. They are intended to restore reliable power distribution and signal transmission, reducing intermittent faults and improving day-to-day dependability for older or modified vehicles. OEMatch focuses on wiring harness and cable items selected for Porsche applications.
Available Types
- Engine and ECU looms
- Lighting and indicator harnesses
- Sensor and actuator cables
- Battery, starter and ground cables
- Connector repair kits and pigtails
- Repair sections and loom protection
Understanding OEMatch Wiring Harness / Cables
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche’s original wiring harnesses and cables. OE (Original Equipment) refers to parts matching original specifications for the wiring harnesses and cables and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM wiring harnesses and cables engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models.
Wiring harnesses and cables route power and data between batteries, alternators, ECUs, sensors, lights and comfort systems. A harness groups individual circuits within protective sleeving, connectors and grommets to simplify installation and protect conductors from heat and abrasion. Correct routing and secure connectors maintain signal integrity and prevent intermittent faults that can affect engine management, lighting and safety systems.
Benefits Include
- Restored electrical reliability and stable signal transmission
- Reduced risk of intermittent faults and diagnostic errors
- Renewed connectors and sealed terminations to limit corrosion
Why Wiring Harness / Cables Wear and Fail
- Heat and ageing that crack insulation and reduce flexibility
- Vibration and mechanical abrasion where harnesses contact structure or moving parts
- Corrosion and water ingress at connectors and terminals
- Rodent damage or external abrasion causing broken conductors
The Importance of Replacing with OEMatch Wiring Harness / Cables
Replacing damaged wiring preserves reliable operation of engine, lighting and safety systems and reduces the chance of intermittent faults that can trigger warning lights or degrade drivability. Faulty wiring can cause sensors to report incorrect values or systems to lose power; addressing wiring issues promptly supports accurate diagnostics and safer operation of the vehicle.
Advantages
- Direct-fit alternatives engineered to match original dimensions and tolerances
- Quality connectors, sealed terminations and heat-resistant sleeving
- Options for repair sections, full looms or connector kits to suit restoration or maintenance needs
Support & Advice
These items affect safety-critical systems. Installation should be carried out by a qualified technician following model-specific procedures and torque settings. Use calibrated tools and new fasteners where specified.
.jpg){kind=link}
