do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Wheel Hub / Carrier
By OE Match
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
set includes hub end cap x 2
Fits:
Porsche 911 - 1974 to 1980
Porsche 911 - 1981 to 1989 (Not for turbo or turbo-look M491)
Porsche 911 (930) turbo - 1975 to 1980
Porsche 928 - 1978 to 1991
Click 'Zoom in' for large parts diagram.
Diagram ref no 33
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134168400
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Wheel hub clamping nut kit for cars with 18mm front spindle.
Kit includesM18x1 clamping nut with bolt x 2
Fits:
Porsche 911 - 1970 to 1989
Porsche 911 (930) turbo - 1975 to 1989
Porsche 924S - 1986 to 1988
Porsche 928 - 1978 to 1995
Porsche 944 - 1982 to 1991
Porsche 968 - 1992 to 1995
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134167300
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Rear Suspension Bearing Pin - fits Left or Right Hand Side
Restore the integrity and serviceability of your Porsche 928
rear suspension with this OE Match Rear Suspension Bearing Pin.
Manufactured to original Porsche specifications and finished with a durable
galvanised coating for long-term corrosion protection, this replacement bearing
pin is supplied complete with two new fixing nuts for a professional-quality
installation.
Fits:
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Diagram ref no 17
Suitable for all Porsche 928 model years from 1978 to 1995,
including the highly desirable GTS models, this suspension bearing pin forms a
critical mounting point within the rear suspension assembly. It is the primary
fixing bolt that secures the rear shock absorber to the rear axle wheel carrier
and plays an essential role in maintaining suspension geometry, stability and
ride quality.
What Does the Rear Suspension Bearing Pin Do?
The rear suspension bearing pin acts as the main fixing point between the rear shock absorber and the rear suspension carrier assembly.
Its primary functions include:
- Securing the rear shock absorber
- Maintaining suspension alignment
- Supporting suspension movement
- Helping control wheel motion
- Preserving ride quality
- Supporting vehicle stability
- Maintaining safe suspension operation
Without a correctly fitted and structurally sound bearing pin, the rear suspension cannot function as designed.
Why Do Rear Suspension Bearing Pins Fail?
Although manufactured from high-strength steel, these bolts are exposed to decades of road use and harsh environmental conditions.
Common causes of deterioration include:
- Corrosion from water and road salt
- Galvanic corrosion between suspension components
- Long-term moisture exposure
- Seizure within the suspension carrier
- Thread damage during removal
- Age-related deterioration
- Previous incorrect installation
- Suspension refurbishment work
Many original bolts become heavily corroded, often making removal extremely difficult during suspension repairs.
Common Problems During Removal
On many Porsche 928 models, including low-mileage and well-maintained vehicles, the original bearing pin can become seized within the rear wheel carrier and shock absorber mounting.
In severe cases:
- The bolt may be impossible to remove conventionally
- The shock absorber lower mount may need cutting away
- Corroded hardware may require grinding off
- Hydraulic pressing equipment may be needed to remove the seized pin
- Replacement hardware becomes essential during reassembly
This is why replacement bearing pins are commonly fitted whenever rear suspension refurbishment or shock absorber replacement is carried out.
Symptoms of a Worn or Damaged Bearing Pin
Potential warning signs include:
- Corrosion visible on the bolt
- Damaged threads
- Suspension looseness
- Difficulty tightening to specification
- Excessive wear during inspection
- Movement within the mounting point
- Signs of previous corrosion damage
Even if no symptoms are present, heavily corroded original hardware should be replaced during suspension work.
When Should the Rear Suspension Bearing Pin Be Replaced?
Replacement is recommended when:
- Replacing rear shock absorbers
- Restoring rear suspension components
- Corrosion is present
- Removing seized original hardware
- Performing preventative maintenance
- Carrying out a full suspension rebuild
- Restoring a Porsche 928 to factory condition
Most Porsche specialists replace these bolts as a matter of course whenever the rear shocks are removed.
Why Replacement Matters
Replacing ageing suspension hardware helps ensure long-term reliability and ease of future servicing.
Benefits include:
- Improved corrosion resistance
- Reliable suspension mounting
- Correct factory fitment
- Improved serviceability
- Enhanced safety
- Long-term durability
- Professional restoration quality
- Reduced future maintenance issues
The galvanised finish provides excellent protection against corrosion, helping the new bearing pin remain serviceable for years to come.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92833164101
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 912E 4CYL 1976
2 required, sold each.
Fits:
Porsche 911 1970-89
Porsche 912 1976
Porsche 924 / 924S 1977-88
Porsche 928 1978-95
Porsche 944 1983-91
Porsche 968 1992-95
Diagram ref no 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134166300
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
This OE Match front wheel hub end cap is a replacement protective cap for the front wheel hub assembly on Porsche 911 and 928 models. This cap helps cover and protect the front wheel hub assembly, supporting a clean, secure, and original-style suspension finish.
Sold individually, 2 required per car, where fitted to both front hubs.
Fits:
Porsche 911 1974 - 1980
Porsche 911 1981 - 1989 (Not for Turbo or Turbo-Look M491)
Porsche 911 (930) TURBO 1975 - 1980
Porsche 928 1978 - 1991
Diagram ref no 33
The front wheel hub end cap covers the outer hub area and helps protect the wheel bearing and hub components from contamination. A correctly fitted end cap supports long-term hub and bearing reliability by helping keep grease in and dirt, water, and debris out.
Functions
• Replaces the front wheel hub end cap
• Helps cover and protect the front hub assembly
• Helps keep dirt, moisture, and road debris away from the hub area
• Supports wheel bearing protection and grease retention
• Restores correct OE-style front hub appearance
• Replaces missing, dented, corroded, loose, or damaged original caps
• OE Match replacement for front suspension and hub service.
Why Replace This Part?
Front wheel hub end caps can become dented, corroded, loose, damaged, or lost during wheel bearing service, brake work, or previous repairs. A missing or damaged cap can allow contamination into the hub area, which may reduce bearing life or cause premature wear. Replacing the cap helps restore correct protection and a clean front hub finish.
When to Replace This Part
• The original hub end cap is missing, loose, dented, or corroded
• Front wheel bearings have been serviced or replaced
• Dirt, moisture, or grease contamination is found around the hub
• Brake disc, hub, or suspension work is being carried out
• The front hub area is being restored
• Correct OE-style wheel hub detail is required
• Preventative replacement is being carried out during front axle service.
Where it fits on the car
This end cap fits on the front wheel hub assembly on Porsche 911 and 928 models. It covers the outer hub area according to the factory front axle layout.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134168400
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Sold each - 2 required per car
Fits:
Porsche 911 1970-89
Porsche 911 (930) TURBO 1975-89
Porsche 924S 1986-88
Porsche 928 1978-95
Porsche 944 1982-91
Porsche 968 1992-95
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134167300
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Wheel Hub Studs 72mm.
The OE MATCH Wheel Hub Studs 72mm are OE-matching wheel fastening components designed to securely mount the wheel to the vehicle hub. Measuring 72mm in length, these high-strength wheel studs provide the threaded connection between the hub and wheel nuts, ensuring safe wheel retention under all driving conditions. They are particularly suitable for standard applications as well as setups using wheel spacers where additional thread engagement may be required.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Manufactured to OE specifications, these wheel hub studs are engineered for precise fitment, correct thread pitch, and exceptional durability. Constructed from high-strength steel, they are designed to withstand the significant loads generated during acceleration, braking, cornering, and high-performance driving.
What This Product Does:
- Provides a secure threaded mounting point for wheel nuts
- Secures the wheel firmly to the hub assembly
- Maintains correct wheel positioning and alignment
- Supports safe braking, handling, and vehicle stability
- Allows proper wheel installation and torque application
- Provides reliable fastening performance under demanding driving conditions
Symptoms Of Wear Or Failure:
- Stripped or damaged threads
- Corrosion affecting stud strength and thread engagement
- Bent or distorted wheel studs
- Difficulty tightening wheel nuts correctly
- Wheel nuts loosening repeatedly
- Cracks or fatigue damage from repeated stress
- Reduced thread engagement due to wear or damage
Why Replacement Matters:
- Restores safe and secure wheel fastening
- Ensures proper wheel nut engagement and torque retention
- Maintains correct wheel alignment and seating
- Prevents wheel movement or loosening during driving
- Supports safe braking, handling, and suspension performance
- Reduces the risk of wheel fastening failures
- Provides OE-style fitment and long-term reliability
- Helps protect wheels, hubs, and braking components from fastening-related damage
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99334167170
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Diameter (RD):14.6mm
Height head (A):5.0mm
Height knurl (B):9.0mm
Head diameter (D1): 20mm
Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 928 1978-95
Porsche 924 1977-88
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
993341671
The product you are viewing cross references to these numbers
OEMatch Wheel Hub / Carrier — Strength, Balance, Style
OEMatch supplies wheel hubs and wheel carriers for Porsche models, selected to support maintenance, restoration and suspension servicing. These components form the primary mounting points for wheels, bearings and brake discs and are central to alignment, steering precision and controlled load transfer across model ranges.
Understanding OEMatch Wheel Hub / Carrier
OEM (Original Equipment Manufacturer) parts are made by the same company that produced your Porsche's original wheel hub / carrier.
OE (Original Equipment) refers to parts matching original specifications for the wheel hub / carrier and may be supplied by alternative manufacturers. Aftermarket parts offer alternative options, sometimes with enhanced features or better value. OEMatch supplies non-OEM wheel hub / carrier engineered as direct-fit alternatives to OEM parts, made to original-spec dimensions and tolerances for Porsche models.
The wheel hub and carrier provide the structural interface between suspension arms, steering links, the brake disc and the wheel bearing. They locate the bearing, set track and camber geometry, and transmit braking and cornering forces into the suspension; correct condition preserves handling, reduces tyre wear and maintains vehicle safety.
Benefits Include
- Restores and maintains correct wheel alignment and secure bearing seating for stable handling.
- Reduces vibration, brake judder and uneven tyre wear.
- Provides accurate mounting for brake discs and steering connections, supporting predictable vehicle response.
Why Wheel Hub / Carrier Wear and Fail
- Corrosion or rust that compromises bearing seats and structural integrity.
- Impact or collision damage causing cracks, bends or distorted mounting faces.
- Wear at fastener locations, fretting or bearing-seating wear leading to looseness or play.
The Importance of Replacing with OEMatch Wheel Hub / Carrier
Replacing worn or damaged hubs and carriers restores suspension geometry, steering accuracy and braking stability. OEMatch parts support these tasks and are offered within a wide catalog, with over 4,000 individual part numbers and more than 8,700 OE cross-references recorded to assist correct selection for Porsche models. Appropriate replacement helps avoid secondary wear and preserves handling.
Advantages
- Available in steel and aluminium variants to match strength and unsprung weight requirements.
- Precision-machined bearing seats and mounting faces for consistent alignment.
- Prepared to original-spec dimensions to fit original mounting points and sensor interfaces where applicable.
